• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.9
• /
• pp.728-732
• /
• 2011

In this study, piezoelectric and dielectric properties of Lead-free $0.97[(K_{0.5}Na_{0.5})(Nb_{0.97}Sb_{0.03})O_3]+0.03[(Bi_{0.5}K_{0.5})TiO_3]$ (abbreviated as 0.97NKNS-0.03BKT)ceramics synthesized by conventional solid-state reaction process were investigated as a function of $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition. The results indicated that the $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition significantly improved the sinterability, grain growth and piezoelctric properties of 0.97NKNS-0.03BKT ceramics. The optimum values as planar piezoelectric coupling coefficient ($k_p$= 0.355), piezoelectric constant ($d_{33}$= 207 pC/N) and mechanical quality factor ($Q_m$= 128) were obtained when 0.009KCT was added. The electromechanical coupling factor($k_p$) was slightly decreased according to the increasing temperature.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2C
• /
• pp.41-49
• /
• 2009

Due to the increased size of civil infrastructure and the cost of materials, the needs exists for utilizing large sized cast-inplace piles in lieu of conventional precast piles. Among them, the barrette pile has become more commonly used in fields where a diaphragm wall is the retaining wall, to improve workability and economical efficiency, and to ensure hole stability under deep soil layers. In this paper, the bearing capacity and displacement characteristics of the barrette pile are evaluated by using the bi-directional loading test data obtained from four different sites. In addition, the design value of pile shaft resistance, ${\beta}$, is assessed with previous literatures and load transfer analysis. Finally, numerical analyses were performed to analyze the load-displacement behavior, and the interface effect on the piles, using the 3-dimensional finite element method.

• Korean Journal of Ecology and Environment
• /
• v.49 no.3
• /
• pp.228-235
• /
• 2016

Aquatic ecosystems are receiving various harmful effects due to anthropogenic chemical pollutions. To protect wildlife, risk assessments of the chemicals are conducted using reference indexes of toxicity estimated by species-level laboratory tests and/or micro-/mesocosm community-level studies. However, the existing micro-/mesocosm communities are structurally too complicated, and it is also difficult to compare the experimental results directly with those from species-level tests. Here, we developed a procedure of a simple bi-trophic microcosm experiment which contains the common species (a green algae, Pseudokirchneriella subcapitata and a cladoceran, Daphnia magna) for testing chemical toxicities. For the proper operation of bitrophic microcosm experiment, the minimum required concentration of primary producer (P. subcapitata) is $5{\times}10^5cells\;mL^{-1}$. The microcosm system showed higher stability when the initially introduced D. magna population was composed of neonates (<24-h old) than adults and those mixture. This simple microcosm system would be an applicable tool to estimate the disturbing impacts of pollutants on plant-herbivore interactions, and linking the species- and population-/community level risk assessments in the future studies.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.4
• /
• pp.184-190
• /
• 2022

Spinel LiMn₂O₄ (LMO) and layered LiNi_0.5Co_0.2Mn_0.3O₂ (NCM) are widely used as positive electrode materials for lithium-ion batteries. LMO and NCM positive electrode materials have a complementary properties. LMO has low cost and high safety and NCM materials show a relatively high specific capacity and better cycle life even at elevated temperature. Therefore, the LMO and NCM active materials are blended and used as a positive electrode in large-size batteries for electric vehicles (xEV). In this study, the cycle performance of a blended electrode prepared by simply mixing LMO and NCM and a bi-layer electrode in which two electrode layers aree sequentially coated are compared. The bi-layer electrode prepared by composing the same ratio of both active materials has similar capacity and cycle performance to the blend electrode. However, the LN electrode coated with LMO first and then NCM is the best in the full cell cycle performance at elevated temperature, and the NL electrode, in which NCM is first coated with LMO has a faster capacity degradation than the blended electrode because LMO is mainly located on the top of the electrode adjacent to electrolyte and graphite negative electrode. Also, the LSTA (linear sweep thermmametry) analysis results show that the LN bi-layer electrode in which the LMO is located inside the electrode has good thermal stability.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.41.2-41.2
• /
• 2011

Recently, scaling down of ULSI (Ultra Large Scale Integration) circuit of CMOS (Complementary Metal Oxide Semiconductor) based electronic devices become much faster speed and smaller size than ever before. However, very narrow interconnect line width causes some drawbacks. For example, deposition of conformal and thin barrier is not easy moreover metallization process needs deposition of diffusion barrier and glue layer. Therefore, there is not enough space for copper filling process. In order to overcome these negative effects, simple process of copper metallization is required. In this research, Cu-V thin alloy film was formed by using RF magnetron sputter deposition system. Cu-V alloy film was deposited on the plane $SiO_2$/Si bi-layer substrate with smooth and uniform surface. Cu-V film thickness was about 50 nm. Cu-V layer was deposited at RT, 100, 150, 200, and $250^{\circ}C$. XRD, AFM, Hall measurement system, and XPS were used to analyze Cu-V thin film. For the barrier formation, Cu-V film was annealed at 200, 300, 400, 500, and $600^{\circ}C$ (1 hour). As a result, V-based thin interlayer between Cu-V film and $SiO_2$ dielectric layer was formed by itself with annealing. Thin interlayer was confirmed by TEM (Transmission Electron Microscope) analysis. Barrier thermal stability was tested with I-V (for measuring leakage current) and XRD analysis after 300, 400, 500, 600, and $700^{\circ}C$ (12 hour) annealing. With this research, over $500^{\circ}C$ annealed barrier has large leakage current. However V-based diffusion barrier annealed at $400^{\circ}C$ has good thermal stability. Thus, thermal stability of vanadium-based thin interlayer as diffusion barrier is good for copper interconnection.

• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.220-231
• /
• 2023

Although omega-3 fatty acids including docosahexaenoic acid (DHA) contain various health-promoting effects, their poor aqueous solubility and stability make them difficult to be induced in dairy foods. The aims of this research were to manufacture casein derivative-based delivery system using acid-induced gelation method with glucono-σ-lactone and to investigate the effects of production variables, such as pH and charged amount of linoleic acid, on the physicochemical properties of delivery systems and oxidative stability of DHA during storage in model milk. Covalent modification with linoleic acid resulted in the production of casein derivatives with varying degrees of modification. As pH was reduced from 5.0 to 4.8 and the charged amount of linoleic acid was increased from 0% to 30%, an increase in particle size of casein derivative-based delivery systems was observed. The encapsulation efficiency of DHA was increased with decreased pH and increased charged amount of linoleic acid. The use of delivery system for DHA resulted in a decrease in the development of primary and secondary oxidation products. An increase in the degree of modification of casein derivatives with linoleic acid resulted in a decrease in the formation of primary and secondary oxidation products than of free DHA indicating that delivery systems could enhance the oxidative stability of DHA during storage in model milk. In conclusions, casein derivatives can be an effective delivery system for DHA and charged amount of linoleic acid played a key role determining the physicochemical characteristics of delivery system and oxidative stability of DHA.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2650-2656
• /
• 2013

Mesoporous alumina was synthesized using bayberry tannin (BT) as template. This novel synthesis strategy was based on a precipitation method associated with aluminum nitrate as the source of aluminum in an aqueous system. $N_2$ adsorption/desorption, XRD, SEM and TEM were used to characterize the as-prepared mesoporous alumina. The results showed that the mesoporous alumina possessed crystalline pore wall, high specific surface area, narrow pore distribution and excellent thermal stability. Moreover, the surface area and pore size of the mesoporous alumina can be tuned by changing the experimental parameters. Further, the mesoporous alumina was investigated as the support of palladium catalyst ($Pd-Al_2O_3{^*}$) for the hydrogenation of propenyl, styrene and linoleic acid. For comparison, the reference catalyst ($Pd-Al_2O_3$) prepared without barberry tannin was also employed for the catalytic hydrogenation. The experimental results showed that $Pd-Al_2O_3{^*}$ exhibited the superior catalytic performance than $Pd-Al_2O_3$ for all the investigated substrates, especially for the hydrogenation of linoleic acid with larger molecular.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.6
• /
• pp.485-491
• /
• 2009

Postoperative skeletal stability was evaluated in combination of Le Fort I and U-shaped osteotomies for superior repositioning of maxilla in bi-maxillary surgeries in 30 consecutive patients. The fifteen patients underwent Le Fort I osteotomy alone and the other fifteen patients underwent Le Fort I and U-shaped osteotomies. In all patients, the maxilla was first osteomized and fixed with absorbable plates system. A bilateral sagittal split ramus osteotomy (BSSRO) of the mandible was then carried out and fixation was performed using absorbable plates. Maxillo-mandibular fixation with rubber ring was used for two weeks post-operatively in all patients. Lateral cephalograms were obtained pre-operatively, 1 day post-operatively, 6 months after surgery. The changes in anterior nasal spine (ANS), point A, upper incisior (U1), and point of maxillary tuberosity (PMT) were examined. The maxillas in the fifteen patients of both examination group were repositioned nearly in their planned positions during surgery and no significant post-operative changes in the examined points of the maxilla were found. These results suggest that a combination of a Le Fort I and U-shaped osteotomy is a useful technique for reliable superior repositioning of the maxilla. The post-operative change in the maxilla using this combination osteotomy was comparatively stable.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2001.11a
• /
• pp.88-88
• /
• 2001

The effects of pH and temperature on the degradation of prokidn in various buffered aqueous solutions(pH 1.32~9.66) and temperatures (35, 45 and 6$0^{\circ}C$ were investigated. The effect of ionic strength on the degradation of prokidin was also measured by varying ionic strength (0.0466~1.5) at pH 1.35 and 45$^{\circ}C$ The effect of metal ions on the degradation of prokidin at pH 7.35 and 3.98 was observed. The degradation of prokidin followed the pseudo- first- order kinetics. The degradation rate of prokidin showed pH-dependent and temperature-dependent patterns. Prokidin was very stable at the pH below 3.95, where half-lives at 35, 45 and 6$0^{\circ}C$were 294, 206 and 107 day, respectively. However, it degraded very rapidly at pH above 6.49; the half-lives at 35, 45 and 6$0^{\circ}C$were 60, 25 and 13 day, respectively. As ionic strength increased, the degradation rate of prokidin increased. Some metal ions increased the degradation rate in the rank order of Mn > Fe > Cu >Fe On the other hand. other metal ions such as Bi, Ba. Zn, Ni, Co did not show unfavorable effect.

• KDI Journal of Economic Policy
• /
• v.46 no.1
• /
• pp.91-129
• /
• 2024

The Bank of Korea, through a legal amendment in 2011 following the financial crisis, was entrusted with the additional responsibility of financial stability beyond its existing mandate of price stability. Since then, concerns have been raised about the prolonged increase in household debt compared to income conditions, which could constrain consumption and growth and increase the possibility of a crisis in the event of negative economic shocks. The current accumulation of financial imbalances suggests a critical period for the government and central bank to be more vigilant, ensuring it does not impede the stable flow of our financial and economic systems. This study examines the applicability of the Integrated Inflation Targeting (IIT) framework proposed by the Bank for International Settlements (BIS) for macro-financial stability in promoting long-term economic stability. Using VAR models, the study reveals a clear increase in risk appetite following interest rate cuts after the financial crisis, leading to a rise in household debt. Additionally, analyzing the central bank's conduct of monetary policy from 2000 to 2021 through DSGE models indicates that the Bank of Korea has operated with a form of IIT, considering both inflation and growth in its policy decisions, with some responsiveness to the increase in household debt. However, the estimation of a high interest rate smoothing coefficient suggests a cautious approach to interest rate adjustments. Furthermore, estimating the optimal interest rate rule to minimize the central bank's loss function reveals that a policy considering inflation, growth, and being mindful of household credit conditions is superior. It suggests that the policy of actively adjusting the benchmark interest rate in response to changes in economic conditions and being attentive to household credit situations when household debt is increasing rapidly compared to income conditions has been analyzed as a desirable policy approach. Based on these findings, we conclude that the integrated inflation targeting framework proposed by the BIS could be considered as an alternative policy system that supports the stable growth of the economy in the medium to long term.