• 대한전자공학회논문지
• /
• 제17권1호
• /
• pp.36-39
• /
• 1980

5Fe₂O₃-5Bi₂O₃소결체에서 V-I특성의 규격화, theramal current runaway의 인가 step 전압의 존성, current channel의 분석등을 연구하였다. 5Fe₂O₃-5Bi₂O₃소결체의 switching 특성의 측정으로부터 전기적 switching기구는 thermal ionic breakdown으로 설명된다.

• 대한전자공학회논문지
• /
• 제16권6호
• /
• pp.11-15
• /
• 1979

700°∼850℃의 온도구간에서 소결한 Fe2O3-Bi2O3 소결체에서 전기적 Switching 현상이 관찰되었다. 30°∼200℃의 주위온도구간에서 이들 소결체의 직류전도도는 소결온도가 증가함과 주위온도의 증가함에 따라 증가하였다. Current channel의 형성과 Switching 전압의 주위온도 의존성에 의해 Fe2O3-Bi2O3 소결체의 주된 전기적 Switching 기구는 열적효과로 생각된다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권7호
• /
• pp.680-689
• /
• 1996

SrCaCuO와 BiPbCuO 화합물로 이루어진 이중층시료가 만들어 졌으며, 소결과정에서 나타나는 확산과 입자간의 상호작용으로 108K의 임계온도를 나타내었다. 이 시료는 820.deg. C에서 0-210 시간동안 소결되었다. 초전도체의 생성, 성장메카니즘과 임계온도의 관계가 연구되었으며, 최적조건은 820.deg. C에서 210시간 소결하고 SrCaCuO와 BiPbCuO의 도포비가 1:0.6인 시편에서 나타났다. 또한 이중층시료에서 가장 좋은 조성비는 S $r_{2}$C $a_{2}$C $u_{2}$ $O_{x}$와 B $i_{1.9}$P $b_{0.5}$C $u_{3}$ $O_{y}$ 이었다.다.

• Nano
• /
• 제13권11호
• /
• pp.1850127.1-1850127.13
• /
• 2018

Bi metal deposited on $Bi_2MoO_6$ composite photocatalysts have been successfully synthesized via a simple reduction method at room temperature with using $NaBH_4$ as the reducing agent. The photocatalytic activity of the composite was evaluated by degradation of rhodamine B (RhB) and bisphenol A (BPA) solution under visible light. The rate constant of $Bi/Bi_2MoO_6$ composite to RhB is 10.8 times that of $Bi_2MoO_6$, and the degradation rate constant of BPA is 6.9 times of that of $Bi_2MoO_6$. Nitrogen absorption-desorption isotherm proved that the increase of specific surface area is one of the reasons for the improvement of photocatalytic degradation activity of $Bi/Bi_2MoO_6$ composites. The higher charge transfer efficiency of $Bi/Bi_2MoO_6$ is found through the characterization of the photocurrent and impedance, which are attributed to the surface plasmon resonance (SPR) effect produced by the introduction of the metal Bi monomer in the composite. Free radical capture experiments proved that cavitation is the main active species. Based on the above conclusions, a possible mechanism of photocatalytic degradation is proposed.

• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.66-69
• /
• 2009

The compositional dependence of bismuth iron oxides and effect of La-substitutions in the structure of $BiFeO_3$ compounds were investigated, which compounds were synthesized by conventional ceramic processing. It is shown that some of bismuth iron oxides including $BiFeO_3$ show the narrow single phase region. The effect of La-doping in $BiFeO_3$ was presented as disappearance of many impurity phases of Bi-Fe-O compounds. The lower electrical resistivity was obtained as those compositions of Fe deficient region and La-doped $BiFeO_3$. The saturation magnetization of La-doped $BiFeO_3$ was increased with La content. The dielectric dispersion was also observed for those Bi-Fe-O compounds with Fe deficient and La-doped $BiFeO_3$ at low frequencies under 1 kHz.

• 한국세라믹학회지
• /
• 제38권8호
• /
• pp.710-715
• /
• 2001

반응소결공정(RSP : Reaction Sintering Process)을 이용하여 YF댸₃와 Fe₂O₃의 성분에 소결첨가재 Bi₂O₃를 첨가하여 YIG를 합성하였다. Bi₂O₃첨가량과 소결온도에 따른 YIG 소결체의 미세구조 및 자기적 특성변화에 대해 주사전자현미경, X-선 회절분석기 및 시료 진동형 자력계를 이용하여 조사하였다. 소량의 소결첨가재 Bi₂O₃첨가시 YIG 소결체의 격자상수는 12.387에서 12.420 Å으로 증가하였다. 이는 상대적으로 이온반경이 큰 Bi 이온이 12면체 Y 이온 자리로 치환되었기 때문인 것으로 여겨진다. Bi₂O₃를 1.0 wt% 첨가하였을 때 비교적 균질한 미세구조를 보였으며, 1350℃에서 소결한 YIG의 밀도가 이론밀도의 98% 이상의 치밀화를 보였다. Bi₂O₃가 0.0 wt%에서 1.5 wt%로 첨가량이 증가함에 따라 상온에서의 포화자화값(M/sub s/)은 조금씩 증가하는 경향을 보였으나 큰 변화는 없었다. 반응소결공정을 이용 YIG 소결시 소결첨가제 Bi₂O₃가 1.0 wt%이고, 소결온도 1350℃에서 비교적 우수한 소결특성과 자기특성을 가지는 YIG 소결체를 얻을 수 있었다.

• The Korean Journal of Ceramics
• /
• 제4권2호
• /
• pp.83-89
• /
• 1998

The structure refinements and the electrical and magnetoelectric measurements were performed for BIT.1BF and BIT.2BT. The tetragonal distortion of the ab plane became lessened with the addition of $4BiFeO_3 into Bi_4Ti_3O_{12}$ significantly. However, the tilting of the outer-oxygen octahedra of the perovskite unit and the elongatin of the $(Bi_2O_2)^{2+}$ layers became more pronounced. For the both phases, the bariations of dielectric properties and electrical conductivities at high temperatures showed that the ferroelectic I-rerroelectric II phase transition existed before reaching the Curie temperature. The electrical conductivity became higher with the increase of $Fe^{3+}$ ions, implying that the electron transfer increased correspondingly. The magnetoelectric effect was observed linear up to ~8 kOe, which was stronger in BIT.1BF than BIT.2BF. This behavior indicates that the distortion of the ab plane may affect the induced polarization as well as magnetic moment.

• Progress in Superconductivity
• /
• 제2권2호
• /
• pp.65-70
• /
• 2001

$Pb/Bi_2Sr_2CaCu_2O_{8+\delta}$-single-crystal junctions with the tunneling direction along the c axis of the crystal were fabricated to obtain an s-wave-superconductor/d-wave-superconductor Josephson junctions. The tunneling R (T) curves and current-voltage characteristics show distinct features which can be explained only under the assumption that the order parameter of high-$T_c/Bi_2Sr_2CaCu_2O_{8+{\delta}}$ superconductors has a pure d-wave symmetry, which is in contrast to the case of $YBa_2Cu_3O_{7+{\delta$}}$erconductors where a minor s-wave component is also present..

• Journal of Magnetics
• /
• 제14권3호
• /
• pp.120-123
• /
• 2009

In this study, BiFe$O_3$-BaTi$O_3$ ceramics have been fabricated by a solid-state reaction method. The effects of BaTi$O_3$ content in the (1-x)BiFe$O_3$-xBaTi$O_3$ (x = 0.1, 0.2, 0.25, 0.3, 0.4, 0.5) system on crystal structure and magnetic, dielectric, and ferroelectric properties were investigated. Perovskite BiFe$O_3$ was stabilized through the formation of a solid solution with BaTi$O_3$. Rhombohedrally distorted structure (1-x)BiFe$O_3$-xBaTi$O_3$ ceramics showed strong ferromagnetism at x = 0.5. Dielectric and ferroelectric properties of the BiFe$O_3$-BaTi$O_3$ system also changed significantly upon addition of BaTi$O_3$. It was found that the maximum dielectric and ferroelectric properties were exhibited in the (1-x)BiFe$O_3$-xBaTi$O_3$ system at x = 0.25. This suggested the morphotropic phase boundary (MPB) with the coexistence of both rhombohedral and cubic phases of the (1-x)BiFe$O_3$-xBaTi$O_3$ system at x = 0.25.

• 한국세라믹학회지
• /
• 제26권6호
• /
• pp.843-849
• /
• 1989

Effect of Bi2O3/Li2CO3 on low temperature sinteirng and dielectric property of BaTiO3 ceramics has been investigated. For the specimen sintered at 110$0^{\circ}C$, it was densified to 96% of BaTiO3 theoretical density by the addition of 1.0-1.25w/o Bi2O3/Li2CO3. Maximum dielectric constant increased and Curie temperature lowered with the increase of Bi2O3/Li2CO3 content, which probably can be explained by thne substitution of Bi3+, Li1+ on BaTiO3 lattice. The volatilization of Li1+, resulting from the increase of soaking time at 110$0^{\circ}C$ leads to the increase of Curie temperature and tetragonality of the specimen.