• 한국결정성장학회지
• /
• 제15권6호
• /
• pp.244-251
• /
• 2005

수열합성법에 의해 제조된 티탄산바륨 (BT01, BT02, BT03, BT04, BT05)의 입자크기와 분체특성과의 상관관계를 비표면적, 제타전위, XPS, XRD 및 SEM에 의해 조사하였다. 레이져광산법에 의해 측정된 입자의 크기는 비표면적과 XRD를 통해 결정된 격자이방성과 밀접한 관계가 있음을 보였다. 분말의 비표면적은 입자의 크기가 증가함에 따라 감소하였으며, BT03 시료는 동일한 입자크기의 BT04에 비하여 큰 비표면적을 보였으며, 이는 입자들의 응집에 기인하는 것으로 SEM사진 및 XRD 분석을 통하여 밝혀졌다. 입자의 크기가 증가함에 따라 제타전위는 증가하는 경향을 보였으며, BT02와 BT03 분말은 다른 분말에 비하여 제타전위가 큰 음의 값을 나타내었다. XPS 분석결과 분쇄시 티탄산바륨과 물 사이의 반응에 의한 $Ba^{2+}$ 이온의 용출과 관련이 있는 것으로 분석되었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.162-165
• /
• 2006

In this study, Liquid Phase Sintered SiC (LPS-SiC) was fabricated by hot pressing method with $\beta$-SiC powder whose a particle size is 30nm and less on the average in argon condition at 1780 and $1800^{\circ}C$ under 20MPa. Alumina ($Al_2O_3$), yttria ($Y_2O_3$) and silica ($SiO_2$) were used for sintering additives. To investigate effects of particle-size and temperature on $SiO_2$, LPS-SiC was fixed $Al_2O_3$, $Y_2O_3$ and then particle-size of $SiO_2$ were changed as two kinds. The system of particle-size and temperature on sintering additives which affects a property of sintering os well os the influence depending on particle-size and temperature of sintering additives were investigated by measurement of sintering properties. Such as measurement of sintering density, vikers hardness and observing of microstructure were investigated to make sure of the optimum condition which is about matrix of $SiC_f/SiC$ composites. Base on the composition of sintering additives, microstructure and sintering property correlation, the effect of particle-size of sintering additives are discussed. An experimental method to investigate the dynamic characteristics of bums in extreme environmental condition is established.

• 한국세라믹학회지
• /
• 제23권3호
• /
• pp.9-14
• /
• 1986

$\beta$-SiC bonded SiC bodies were prepared from various conditions such as several compositions of(Si+C)/$\alpha$ -SiC ratio and different firing schedules and were respectively investigated compressive strength MOR and mi-crostructure. One firing schedule which produced the specimens that had $\beta$-SiC neck form with the highest strength was selected and experimented by each firing temperature. results obtained are as follows : 1) The amount of (Si+C) for th highest MOR of SiC-(Si+C) sintered body is 20wt% 2) By adding 20wt% content of (Si+C) and heating up to 1, 500 with soaking 3hrs respectively at 1,150$^{\circ}C$ 1,250$^{\circ}C$ 1,350$^{\circ}C$ and 1,400$^{\circ}C$ the highest MOR of fired specimen was resulted and its microstructure of ma-trix was composed of close $\beta$-SiC neck. 3) Microstructure of $\beta$-SiC were different greatly from each other by firing time and/or quantity of adding mix-ture and it was confirmed that they were composed of neck particle-like and heterogeneous texture. 4)$\beta$-SiC synthesis proceed rapidly at the temperature between 1,250$^{\circ}C$ and 1,350$^{\circ}C$ 5) All of the properties of 85 SiC-20(Si+C) specimen improved according to increasing temperature above 1,350$^{\circ}C$.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1706-1712
• /
• 2012

The Beta-ray absorption method (BAM) gives a good solution for measuring the mass concentration of atmospheric particles(PM10 and PM2.5). To determine particular matters (PM) concentration, a ratio of the number of detected beta-ray intensity passing through the clean filter and the dust-sampled filter is used. These intensity data measured in air pollution monitoring such as PM10 and PM2.5 usually contained the additive noise(thermal noise, power supply noise and etc.). Therefore, the estimation performance of mass concentration can be deteriorated by these noises. In this paper, we present a new noise reduction method that is essentially required to develope an automatic continuous PM monitoring system using beta-ray absorption method. By combining the block data averaging technique and curve fitting, in the proposed method, the additive noise can be reduced in the measured data. To evaluate the performance of the proposed method, computer simulations were performed with computer generated signals as the input.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1828-1834
• /
• 2019

The performance of a plastic scintillator for use in an in situ measurement system was analyzed using simulation and experimental methods. The experimental results of four major pure beta-emitting radionuclides, namely $^3H$, $^{14}C$, $^{32}P$, and $^{90}Sr/^{90}Y$, were compared with those obtained using a Monte Carlo N-particle (MCNP) code simulation. The MCNP simulation and experimental results demonstrated good agreement for $^{32}P$ and $^{90}Sr/^{90}Y$, with a relative difference of 1.95% and 0.43% between experimental and simulation efficiencies for $^{32}P$ and $^{90}Sr/^{90}Y$, respectively. However, owing to the short range of beta particles in water, the efficiency for $^{14}C$ was extremely low, and $^3H$ could not be detected. To directly measure the low-energy beta radionuclides considering their short range, a system where the source could flow directly to the scintillator was developed. The optimal thickness of the plastic scintillator was determined based on the suggested diameter. Results showed that the detection efficiency decreases with an increase in the depth of the water. The detection efficiency decreased drastically to approximately 10 cm, and the tendency was gradually constant.

• 한국의학물리학회지:의학물리
• /
• 제9권1호
• /
• pp.37-46
• /
• 1998

Beta-particle energy distributions of the radionuclides in medicine are calculated for the medical physics applications. The radial component solutions of Dirac wave equations are evaluated for a point-nucleus un screened Coulomb potential. The WKB method is employed to correct the screening due to the orbital-electron cloud. Fierz interference terms are ignored. The radionuclides considered are $\^$32/P, $\^$90/Y, $\^$131/I, $\^$166/Ho, $\^$192/Ir, $\^$198/Au, $\^$153/Sm, $\^$169/Er and $\^$188/Re. A total of 9 beta-spectra for the radionuclides, currently in domestic use or potential use in the near future, are calculated with enough accuracy and presented in graphs and tables.

• Nuclear Engineering and Technology
• /
• 제33권2호
• /
• pp.121-131
• /
• 2001

An investigation of the sensitivity depletion laws for rhodium SPNDs was performed to reduce the uncertainty of the sensitivity depletion laws used in Combustion Engineering (CE) reactors and to develop calculational tools that provide the sensitivity depletion laws to interpret the signal of the newly designed rhodium SPND into the local neutron flux. The calculational tools developed in this work are computer programs for a time-dependent neutron flux distribution in the rhodium emitter during depletion and for a time-dependent beta escape probability that a beta particle generated in the emitter escapes into the collector. These programs provide the sensitivity depletion laws and show the reduction of the uncertainty by about 1 % compared to that of the method employed by CE in interpreting the signal into the local neutron flux. A reduction in the uncertainty by 1 % in interpreting the signal into the local neutron flux reduces the uncertainty tv about 1 % in interpreting the signal into the local power and lengthens the lifetime of the rhodium SPND by about 10% or more.

• 한국전자통신학회논문지
• /
• 제9권11호
• /
• pp.1277-1282
• /
• 2014

본 논문에서는 청소년의 집중과 관련된 EEG신호를 분석하는 것을 목적으로 하여 글자 시각자극 과제로 제시했을 때 유발되는 EEG신호를 분석한 결과를 제시한다. 시각자극 과제는 글 속에서 틀린 조사들을 찾는 것이다. 본 실험에서는 선행연구결과에 따라 EEG신호 중에서도 특히 SMR파와 중간 베타파를 분석하는데 초점을 맞추었다. 실험결과로서 피험자의 집중력과 상관성이 높은 채널의 위치와 중간 베타파 대역을 제시하였다.

• Journal of Plant Biotechnology
• /
• 제2권3호
• /
• pp.135-142
• /
• 2000

The activity of promoter sequences was evaluated in garlic cells using the $\beta$-glucuronidase (GUS) gene as a reporter. Histochemical GUS assay indicated transient GUS activity in leaf, callus and root cells 48 hours after particle bombardment transformation. Quantitative fluorometric assays in extracts of transformed leaves demonstrated that the CsVMV promoter induced the highest level of gene expression, which was, on average, ten fold the level induced by CaMV35S and by the Arabidopsis Act2 promoters and two fold the level expression observed with a construct containing a double CaMV35S plus the untranslated leader sequence from AMV. No activity or very low levels were observed when cells were transformed with plasmids rontaining the typical monocot promoters, Actl, from rice or the Ubi-1, from maize. The green fluorescent protein (GFP) was also tested as a marker gene for garlic transformation. Intense fluorescence was observed in leaf, callus and root cells transformed with a construct containing the gfp gene under control of the CaMV35 Promoter. No fluorescence was detected when the gfp was under control of the Ubi-1 promoter.

• 천문학회지
• /
• 제36권spc1호
• /
• pp.55-61
• /
• 2003

There are at least three effects of the non-thermal particle bombardment on the solar atmosphere: (1) non-thermal ionization and excitation; (2) proton-hydrogen charge exchange; (3) impact line polarization. Due to the non-thermal ionization and excitation effects of electron bombardments in flares, H$\alpha$ line is widely broadened and shows a strong central reversal. Significant enhancements at the line wings of Ly$\alpha$ and Ly$\beta$ are also predicted. In the case of proton bombardment, less strong broadening and no large central reversal are expected. However, due to proton-hydrogen charge exchange, the enhancements at the red wings of Ly$\alpha$ and especially of Ly$\beta$ lines at the early impulsive phase of flares are significant. Electron beam can also in some cases generates visible and UV continuum emission in white-light flares. However, at the onset phase, a negative 'black' flare may appear in several seconds, due to the increase of the $H^-$ opacity. The impact polarization of atomic lines can provide complementary information on the energetic particles, the energy transport and deposit in the solar chromosphere. New results of spectropolarimetric analysis for the major flare on July 23, 2002 are also given in the paper.