• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1197-1205
• /
• 2007

An adaptive K-best detection scheme is proposed for MIMO systems. The proposed scheme changes the number of survivor paths, K based on the degree of the reliability of Zero-Forcing (ZF) estimates at each K-best step. The critical drawback of the fixed K-best detection is that the correct path's metric may be temporarily larger than K minimum paths metrics due to imperfect interference cancellation by the incorrect ZF estimates. Based on the observation that there are insignificant differences among path metrics (ML distances) when the ZF estimates are incorrect, we use the ratio of the minimum ML distance to the second minimum as a reliability indicator for the ZF estimates. So, we adaptively select the value of K according to the ML distance ratio. It is shown that the proposed scheme achieves the significant improvement over the conventional fixed K-best scheme. The proposed scheme effectively achieves the performance of large K-best system while maintaining the overall average computation complexity much smaller than that of large K system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.8
• /
• pp.385-393
• /
• 2008

The best coverage problem is finding a path whose worst distance to the sensor-set is the best among all paths. Instead, if the user stays close to its nearest two sensors, then the stability of the wireless connection may be guaranteed. So we consider the problem of finding a second best coverage path; given the sensor set U, a starting point s and a target point t, find a path whose worst distance to the second closest sensor is minimized. This paper presents an O(n logn) -time algorithm to find such a path. We also give experimental evidence showing that the connection to the sensor-set along a second best coverage path is more stable than that along the best coverage path.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.862-869
• /
• 2009

We propose a new adaptive K-best Sphere Decoding (SD) algorithm for Multiple Input Multiple Output (MIMO) systems where the number of survivor paths, K is changed based on the characteristics of path metrics which contain the instantaneous channel condition. In order to overcome a major drawback of Maximum Likelihood Detection (MLD) which exponentially increases the computational complexity with the number of transmit antennas, the conventional adaptive K-best SD algorithms which achieve near to MLD performance have been proposed. However, they still have redundant computation complexity since they only employ the channel fading gain as a channel condition indicator without instantaneous Signal to Noise Ratio (SNR) information. hi order to complement this drawback, the proposed algorithm use the characteristics of path metrics as a simple channel indicator. It is found that the ratio of the minimum path metric to the other path metrics reflects SNR information as well as channel fading gain. By adaptively changing K based on this ratio, the proposed algorithm more effectively reduce the computation complexity compared to the conventional K-best algorithms which achieve same performance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.115-122
• /
• 2014

Mobile robot has been studied for long time due to its simple structure and easy modeling. Regarding path planning of the mobile robot, we suggest real-time hybrid path planning algorithm which is the combination of optimal path planning and real-time path planning in this paper. Real-time hybrid path planning algorithm modifies, finds best route, and saves calculating time. It firstly plan the route with real-time path planning then robot starts to move according to the planned route. While robot is moving, update the route as the best outcome which found by optimal path planning algorithm. Verifying the performance of the proposed method through the comparing real-time hybrid path planning with optimal path planning will be done.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1931-1938
• /
• 2012

A by-pass path in wireless sensor networks is the alternative path which be able to forward data when a routing path is being broken. One reason of depleting energy is occurred by the path. The method for solving prior to addressed the problem is proposed. However, this method may deplete radio resource. The best path has advantage that network lifetime of sensor nodes is prolonged; on the contrary, in order to maintain the best path it have to share their information between the entire nodes. In this paper, we propose the best path searching algorithm in the distributed three dimensional sensor networks. Through the neighboring informations sharing in the proposed method, the proposed algorithm can decide the best k-path as well as the extension of network lifetime.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.587-595
• /
• 2015

A by-pass path in wireless sensor networks is the alternative path which be able to forward data when a routing path is being broken. One reason of depleting energy is occurred by the path. The method for solving prior to addressed the problem is proposed. However, this method may deplete radio resource. The best path has advantage that network lifetime of sensor nodes is prolonged; on the contrary, in order to maintain the best path it have to share their information between the entire nodes. In this paper, we propose the best path searching algorithm in the distributed three dimensional sensor networks. Through the neighboring informations sharing in the proposed method, the proposed algorithm can decide the best k-path as well as the extension of network lifetime.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.197-204
• /
• 2014

RIP, EIGRP, OSPF are the interior gateway protocol for sending and receiving routing information among routers in AS(Autonomous System). Various path selection methods using the metric in regard to them have been studied recently but there are few examples that the contents learners understand theoretically are verified by the practice. The Best Path is determined by calculating the Cost value based on the relevant topology of each routing protocol. After implementing the virtual network, it is certain that the results tracking and verifying the relevant path selection of each routing protocol are consistent with the Best Path. If methods suggested in this paper are applied properly, the relevant path selection process of routing protocol can be understood systematically. And it is expected that the outstanding results of learning will be able to be achieved.

• The Journal of Korea Robotics Society
• /
• v.18 no.3
• /
• pp.337-345
• /
• 2023

In this paper, we propose a 3D LiDAR sensor-based costmap generation and path planning algorithm using it for reliable autonomous flight in complex indoor environments. 3D path planning is essential for reliable operation of UAVs. However, existing grid search-based or random sampling-based path planning algorithms in 3D space require a large amount of computation, and UAVs with weight constraints require reliable path planning results in real time. To solve this problem, we propose a method that divides a 3D space into several 2D spaces and a path planning algorithm that considers the distance to obstacles within each space. Among the paths generated in each space, the final path (Best path) that the UAV will follow is determined through the proposed objective function, and for this purpose, we consider the rotation angle of the 2D space, the path length, and the previous best path information. The proposed methods have been verified through autonomous flight of UAVs in real environments, and shows reliable obstacle avoidance performance in various complex environments.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.203-210
• /
• 2011

Ant Colony System is a new meta heuristics algorithms to solve hard combinatorial optimization problems. It is a population based approach that uses exploitation of positive feedback as well as greedy search. It was first proposed for tackling the well known Traveling Salesman Problem. In this paper, we propose the searching method to consider the overlapping edge of the global best path of the previous and the current. This method is that we first determine the overlapping edge of the global best path of the previous and the current will be configured likely the optimal path. And, to enhance the pheromone for the overlapping edges increases the probability that the optimal path is configured. Finally, the performance of Best and Average-Best of proposed algorithm outperforms ACS-3-opt, ACS-Subpath and ACS-Iter algorithms.

• International Journal of Computer Science & Network Security
• /
• v.23 no.11
• /
• pp.43-52
• /
• 2023

The paper aims to clarify how to make a decision using geographic information systems and how to choose the best route between two cities to suit the expectations of the driver and his sense of safety and comfort on the road. Use a special model for network analysis, where the network analysis tool relied on the following data (maximum speed of the road - number of intersections - road width - peak period) in choosing the best safe path. The paper concluded that the best safe route for refugees between the cities of Khartoum - Arqin crossing is ( Khartoum - Shendi - Atbara - Meroe - Abu Hamad - Wadi Halfa). We advise all GIS users to use the theories of spatial analysis when creating a new model.