• Korean Journal of Food Science and Technology
• /
• v.4 no.4
• /
• pp.239-244
• /
• 1972

Commercial edible soybean oil was introduced into plastic containers. Colorless transparent (control), red transparent, green transparent cellophane films and, also, colorless transparent cellophane films coated respectively with Cemedine C, Cemedine C containing 10% pyridine, benzophenone, and p-aminobenzoic acid were prepared, and the % transmittance of each film to lights at U.V. and visible regions were measured. The containers were covered with the films and irradiated simultaneously with direct sunlight for 4.5 hours daily. The peroxide values of the oils in the plastic containers were determined at regular intervals. The effects of the Alms on the PV development of the oils were compared with that of the control, i.e., the colorless transparent films.The red and green films showed strong retarding effects ell the PV development. The red films showed a slightly stronger effect than the green ones. The colorless transparent films coated with Cemedine C showed an appreciable retarding effect. The films had absorbed the lights at the U.V. and visible regions considerably. The pyridine and benzophenone coated films lost their retarding effects after 10 and 4 days respectively. The p- aminobenzoic acid coated films showed a considerable retarding effect throughout the experimental period. The films had absorbed the lights strongly .As a whole, the retarding effects of the films on the PV development were, in decreasing order. as follows; Red> Green> p-Aminobenzoic acid coated > Cemedine Ccoated) Control > Pyridine coated > Benz ophenone coated

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.5 s.142
• /
• pp.617-625
• /
• 2005

The purpose of this study was to develop functional and environment-friendly polyester fabric by irradiating Ultra-Violet, which was produced by the low-pressure mercury lamp. UV irradiation was conducted with various treatment times and distances. Also, pretreatments of solvents and photoinitiator were used to improve the surface modification effects. The effects of UV irradiation on the moisture regain were found to increase gradually with increase of UV treatment time and decrease of treatment distance. Compared the effects of UVC and UVA, UVC was more effective than UVA. Moisture regain and wicking of PET was increased after UV treatment in our experimental condition. And owing to increasing of moisture regain, static charge was decreased. Pretreatment of solvents such as methanol, ethyl ether and addition of photoinitiator such as Benzophenone accelerated surface modification. The moisture regain was increased but wicking was decreased with pretreatment and addition of photoinitiatior. Therefore it is considered as inappropriate f3r clothing because of wicking effects. Yellowness, tensile strength and elasticity slightly decreased after UV irradiation.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.979-984
• /
• 1999

Aromatic soluble polyimides were synthesized from 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane and various dianhydrides such as pyromelltic dianhydride(PMDA), 3,3',4,4'-benzophenone tetracarboxylic dianhydride(BTDA), and 4,4'-(hexafluoroisopropylidene)-bis(phthalic anhydride)(6FDA). Polyimides prepared by thermal imidization were insoluble in common organic solvents (acetone, MNP, DMAc, DMSO, THF, and DMF) but those prepared by chemical imidization were soluble. The difference of solubility was explained by esterification between hydroxyl group and $CH_3COO^-$ from acetic anhydride used as a dehydration agent in chemical imidization. Glass transition temperatures of polyimides by thermal method were higher than those by chemical method. All of the polyimides are stable up to $300^{\circ}C$ regardless of the sample preparation. The x-ray diffraction patterns showed that all polyimides were amorphrous.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.29-34
• /
• 2002

Because do dilution (5%) in Venzotriazol distilled water and is kept UV interception departure woe which make to time each 1, 2, 5, 15, 20, 30 minutes by dip method, produced sample ore of UV interception lens. Spectrum of transmittance for each sample are measured in 320~450nm sacred grounds. The result optical absorption edge is each 403, 408, 414, 419nm regions, and absorption edge appeared in each band of 3.07, 3.04, 2.99, 2.96 eV. UV-cut lens departure solution make 2-Hydroxy-4-n-octoxyhenzophenones of 5%, 10% because solvent methanol and UV-cut lens made by Spray pyrolysis method. Transmission edge of each lens that do spray to same warelength showed sameinwavelength spectra. Being storehouse absorption edgethat increase 385, 398 and 417nm region of when do spray for 2, 4 and 6 minutes, band is accomplishing each 3.22, 3.11, 2.97 eV.

• Journal of the Korean Chemical Society
• /
• v.22 no.1
• /
• pp.37-44
• /
• 1978

The effect of lithium chloride on the borane reduction of organic compounds was studied for three ketones, seven acid derivatives, three epoxides and cyclohexene in tetrahydrofuran at $0^{\circ}$. When compared with borane itself, borane-lithium chloride system enhanced the rates of reductions markedly of 2-heptanone, acetophenone, benzoyl chloride, phthalic anhydride, and three epoxides, whereas the reductions of benzophenone, four esters and cyclohexene showed little or no effect. $BH_3$-LiCl (1 : 0.1) reduced styrene oxide in 2 hr at $0^{\circ}$ to give 94.2 % yield of alcohols, 1-to 2-phenylethanol ratio being 60.8 to 39.2. And in the reduction of cyclohexene oxide, $BH_3$-LiCl (1 : 0.1) gave a quantitative yield of cyclohexanol in 2 hr at $0{\circ}$, however $BH_3$-LiCl (1 : 1) gave 58 % cyclohexanol and 42 % 2-chlorocyclohexanol. In the reduction of cyclohexene oxide, lithium nitrate showed no rate enhancement even when the salt was added in large excess. A formation of lithium chloroborohydride in the$BH_3$-LiCl system is suggested.

• Applied Biological Chemistry
• /
• v.18 no.1
• /
• pp.30-41
• /
• 1975

A substituted diphenyl ether herbicide(MC-4379) was studied on the decomposition by some environmental factors; sunlight, microorganisms, and the crude enzyme in rice plant extract. All the decomposition products were confirmed by means of TLC, GLC, and IR. The parent compound and the decomposition products were put to the test for the effect on the growth of some plants. The results obtained are summarized as follows: 1. Photolysis Amino-MC-4379, 2,4-dichloro-3'-carboxyl-4'-nitrodiphenyl ether, Nitrofen, 2,4-dichloro-3'-carboxyl-4'-amino-diphenyl ether, amino-Nitrofen, 3-carboxymethyl-4-nitrophenol, p-nitrophenol, p-aminophenol, etc. were confirmed as photoproducts, in addition to a relatively small amount of an unknown compound. It was confirmed that the solution-phase photolysis of MC-4379 was accelerated much more by the aid of a photosensitizer benzophenone. 2. Degradation by the crude extract of germinating rice seeds Nitrofen was confirmed as a major degradation product, in addition to a relatively small amount of and unknown compound. Most of the parent compound remained unchanged. 3. Degradation by microorganisms Nitrofen and amino-MC-4379 were confirmed as the major products. in addition to a small amount of an unknown compound. 4. The germinating rice seeds and soybean were grown in the 1,000 ppm emulsions of some chemicals, respectively. The effect on rice plant growth was in the inhibitory order of p-nitrophenol > C-6989> Nitrofen > amino-Nitrofen > MC-4379. The effect on soybean was in the order of Nitrofen > amino-Nitrofen > MC-4379. Two weeds, Amantus blitum and Setaria viridis were grown in the 500 ppm emulsions containing the compounds, respectively. After incubation for 3 days, it was observed that all the shoots had been dead.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.828-831
• /
• 1999

5,15-Bis(mesityl)-10,20-bis(4-amino)porphyrin was synthesized with meso-(mesityl)dipyrromethane and 4-nitrobenzaldehyde. It was characterized with $^1H$-NMR spectroscopy, UV spectrophotometer, and GC-MASS. In UV spectrum, Soret-band(438 nm) and Q-bands(526, 572, 611 nm) were confirmed. In NMR spectrum, the characteristic peak of porphyrin was detected at -2.65 ppm. Copolyimide containing porphyrin structure was synthesized with mesityl-$TPP(NH_2)$, 3,3',4,4'-benzophenonetetracarboxylic dianhydride(BTDA) and 2,2-bis(4-(4-aminophenoxy)phenyl) hexafluoropropane(BAPHF) and characterized with UV and FT-IR spectrophotometer. The $T_g$ and $T_m$ of the synthesized copolyimide were 220.7 and $369.2^{\circ}C$, respectively.

• The Korean Journal of Pesticide Science
• /
• v.9 no.2
• /
• pp.153-158
• /
• 2005

Safening activities of optically active ${\alpha}$-methylbenzylphenylureas on crop injury of rice (Oryza sativa L., cv. Tsukinohikari, japonica) caused by bensulfuron-methyl (methyl 2-[[[[[(4,6-dimethoxy-2-pyrimidinyl)amino]carbonyl]amino]sulfonyl]methyl]benzoate) and pyribenzoxim (benzophenone o-[2,6-bis[(4,6-dimethoxy-2-pyrimidinyl)oxy]benzoyl]oxime) were investigated. Some derivatives of the optically active compounds exhibited strong safening activity against growth inhibition of rice by bensulfuron-methyl. Out of the derivatives tested, (S)-2,3-diCl and (S)-2-F-4-Me derivatives showed greater relieving activity than that of dymuron. In addition, the stress relieving activity was also obtained when they were applied at 4 days after bensulfuron-methyl treatment. On the other hand, crop injury caused by pyribenzoxim was relieved by about 95% with (S)-2-F-4-Me derivative in shoots and roots of rice seedlings.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.4
• /
• pp.446-464
• /
• 2015

Objectives: This study was conducted to evaluate the task-specific hazards of chemicals used by nail technicians in Daegu Metropolitan City. Materials: A total of 30 nail shops located in Daegu City were surveyed to investigate the major tasks and practices performed by nail technicians and the ingredients listed in nail care products used in shops. We also collected instructions for use and material safety data sheets(MSDSs) of nail care products and compared CAS Nos. of ingredients with the lists of chemicals regulated by the Industrial Safety and Health Act(ISHA) and Chemical Substances Control Act(CSCA). Results: A total of 125 chemical ingredients were found in 468 nail care products used at the 30 nail shops. The most frequently found ingredients were ethyl acetate(72%), followed by n-butyl acetate(71.8%), isopropanol(56%), benzophenone(51.1%), nitrocellulose(46.4%) and ethanol(45.3%). Comparing six tasks, the task of manicuring used the most products at 222 products containing 91 ingredients. Among the 125 ingredients, there are 31 chemicals with occupational exposure limits(OEL) designated by the Ministry of Employment and Labor(MoEL), eight categorized as carcinogens, one mutagen and two reproductive toxic chemicals. In terms of carcinogens, formaldehyde was identified as the only confirmed human carcinogen(1A). We found that there was one chemical with a permissible limit, one special management substance, 18 workplace monitoring substances and ten special health diagnosis substances regulated by ISHA. For CSCA, nine poisonous substances, six substances requiring preparation for accidents and one restricted substance were identified. Conclusions: Based on these findings, formaldehyde was identified as one of the chemicals that should most strictly be controlled for the protection of the health of nail technicians and customers. At the same time, it is necessary to distribute materials with detailed hazardous information of nail care products for nail shop technicians.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1037-1047
• /
• 2014

A highly sensitive analytical method based on stir bar sorptive extraction (SBSE) technique and gas chromatography/tandem mass spectrometry (GC/MS-MS) has been developed, allowing the simultaneous multi-analyte determination of seven UV filters in water samples. The stir bar coated with polydimethylsiloxane (PDMS) was added to 40 mL of water sample at pH 3 and stirred at 1,100 rpm for 120 min. Other SBSE parameters (salt effect and presence of organic solvent) were optimised. The method shows good linearity (coefficients > 0.990) and reproducibility (RSD < 12.9%). The extraction efficiencies were above 84% for all the compounds. The limits of detections (LOD) and limits of quantification (LOQ) were 2.1~8.6 ng/L and 6.8~27.5 ng/L, respectively. The developed method offers the ability to detect 8 UV filters at ultra-low concentration levels with only 40 mL of sample volume. Matrix effects in tap water, river water, wastewater treatment plant (WWTP) final effluent water and seawater were investigated and it was shown that the method is suitable for the analysis of trace level of 7 UV filters except of benzophenone (BP). The method developed in the present study has the advantage of being rapid, simple, high-sensitive and both user and environmentally friendly.