초탄성 니켈-티타늄 호선의 하중값은 온도 변화에 따라 변화함이 보고된 바 있다. 따라서 본 연구에서는 온도가 변화함에 따라 니켈-티타늄 합금 호선의 하중값이 어떻게 변화하는지 알아보고자 하였다. $37^{\circ}C$ 항온 상태에서 $0.016"{\times}0.22"$ 니켈-티타늄 호선을 3.1 mm까지 변위시키는 3점 굴곡 실험을 시행하여 하중 시와 탈하중 시의 1.5mm 변위지점의 하중값을 측정하고 이 지점에서 구강내 온도 변화를 고려한 온도 변화 실험을 시행하였다. $20^{\circ}C$ 저온수 또는 $50^{\circ}C$ 고온수를 호선에 흘려보냄으로써 온도 변화를 주었다. 저온 실험은 저온수로 온도 변화를 주고 $37^{\circ}C$ 항온 온도로 회복된 후에 다시 저온수를 흐르게 하는 방법으로 10회 시행하였고 고온 실험도 동일한 방법으로 시행하였다. 그 결과 하중 시 1.5mm 변위지점의 하중값은 저온 실험 및 고온 실험 후 $37^{\circ}C$로 회복된 후에도 모두 감소된 값을 유지하였다. 반대로 실제로 치아에 가해지는 교정력으로 생각되는 탈하중 시 1.5 mm 변위 지점의 하중값은 저온 실험 및 고온 실험 후 온도가 $37^{\circ}C$로 회복되어도 모두 증가된 값을 유지하였다. 이상의 결과를 종합해 볼 때 온도변화를 거친 후 초탄성 니켈-티타늄 합금 호선의 하중 시 힘은 감소하였고 탈하중 시 힘은 증가되므로, 임상에서 니켈-티타늄 호선을 적용 시에는 $37^{\circ}C$에서의 하중-변위 곡선에서 나타나는 힘에 비해 더 작은 하중 시 힘과 더 큰 탈하중 시 힘이 적용될 수 있음에 유의하여야 한다.
미세균열이 생기기 전 $80^{\circ}C$ 물속에서 침수시간이 변함에 따른 $Avimid^{R}$ K3B/IM7 복합재의 습기노화현상에 관하여 연구하였다. $80^{\circ}C$ 물속에서 복합재의 강성을 저하시키는 요인으로는 수지 강성의 저하나 잔류응력의 변화 그리고 섬유와 수지 사이의 계면 손상이다. $80^{\circ}C$ 물속에서 수지에 습기가 포화되는 시간은 500 시간이며 K3B/IM7 복합재에 습기가 포화되는 시간은 100 시간이다. $80^{\circ}C$ 물속에서 수지가 500 시간 가속노화한 후 DSC 시험을 한 결과 $T_{g}는 1\%$ 이내 증가하였으며 무게는 $1.55\%$증가하였다. $80^{\circ}C$ 물속에서 수지의 습기 포화 속도가 복합재의 습기 포화 속도 보다 빨랐다. 500 시간 노화한 후 수지의 파괴인성은 $37\%$ 저하하였으며 100 시간 노화한 후 [+45/0/-45/90]s K3B/IM7 복합재의 미세균열 파괴인성은 $28\%$ 감소하였다.
콘크리트는 혼합물로서 비균질성, 이방성 및 비선형성 재료이기 때문에 그의 파괴해석에 있어서 재래의 강도 개념보다 파괴역학 개념을 적용하여 콘크리트의 파괴인성을 도입하여 평가하는 것이 보다 합리적이라 할 수 있다. 지금까지 콘크리트에 적용되어 온 파괴역학 개념은 두가지로 대별될 수 있는데 하나는 선형탄성파괴역학 개념이고 다른 하나는 비선형파괴역학 개념이다. 그러너 전자를 콘크리트에 적용하는데는 문제점과 불합리성이 지적되어 왔다. 본 연구에서는 비선형파괴역학에서 많이 이용되어온 J-적분법과 COD법을 도입하여 굵은골재의 최대치수와 노치깊이의 변화가 콘크리트의 파괴거동, 파괴에너지 및 균열성장에 미치는 영향, 균열개구변위와 파괴에너지의 관계 등을 고찰하기 위하여 콘크리트 작사각형 보를 제작하여 3점 휨 파괴실험을 수행하였다. 그 결과 굵은골재의 최대치수와 노치깊이가 증가할수록 하중-치 짐거동의 비선형성이 더욱 두드러졌고, 굵은골재 최대치수의 증가는 콘크리트의 연성을 증가시켜 보다 안정된 파괴를 유도하였으며, 균열전파경로는 굵은골재의 최대치수가 증가할수록 점점 더 직선에서 벗어나 불규칙적이었으나 노치깊이의 변화에는 거의 영향을 받지 않았다. 또한 파괴에너지는 굵은골재의 최대치수가 증가하고 노치깊이가 감소할수록 증가하였으나, 균열개구변위는 노치깊이가 증가할수록 감소하였으며 굵은골재의 최대치수의 변화에는 거의 영향을 받지 않았다.
일반적인 로봇시스템은 자신이 이동해야 할 목표 지점을 자율적으로 생성할 수 없으므로 어떤 다른 시스템의 정보를 이용하여 주변을 탐색하거나 장애물을 인식하고 식별하여 자신의 제어전략을 수립한다. 그러므로 본 논문에서 제시한 시스템은 초소형 비행체를 이용하여 주위 환경과 자율 이동로봇의 위치 정보를 탐색할 수 있도록 시스템을 구성하였다 이러한 시스템의 성능은 로봇이 위치하고 있는 주위의 불완전한 정보로부터 적절한 결론을 유도해 낼 수 있어야 한다. 그러한 비선형적인 문제는 현재까지도 문제 해결을 위해 많은 연구가 진행되고 있다. 본 연구에서는 자율이동로봇의 행동 환경을 공간상의 제약을 받지 않는 비선형 시스템인 초소형 비행체에 극초단파(UHF16채널) 영상장치를 이용하여 호스트 PC로 전송하고 호스트 PC는 로봇의 현재 위치, 이동해야 할 목표위치, 장애물의 위치와 형태 등을 분석한다. 분석된 결과 파라메타는 RF-Module을 이용해서 로봇에 전송하고, 로봇은 그 데이터를 분석하여 동작하게 된다. 로봇이 오동작 또는 장애물로 인해 정확한 목적지까지 도달하지 못할 때 호스트 PC는 새로운 최단경로를 생성하거나 장애물을 회피 할 새로운 전략을 로봇에게 보내준다. 본 연구에 적용한 알고리즘은 초소형 비행체에서 탐지한 불완전한 영상정보에서도 비교적 신뢰도 놀은 결과를 보이는 A* 알고리즘을 사용하였다 적용한 알고리즘은 실험을 통하여 실시간으로 정보를 처리할 수 있었으며, 자율 이동로봇의 충돌회피나 최단 경로 생성과 같은 문제를 실험을 통하여 그 성능과 타당성을 검토하였다.delta}textitH]$를 도출하였다.rc}C$에서 30 ㎫의 압력으로 1시간동안 행하였다 소결한 시편들은 직사각형 형태로 가공하였으며 표면은 0.5$\mu\textrm{m}$의 다이아몬드 입자로 연마하였다. XRD, SEM 및 TEM을 이용하여 상분석 및 미세조직관찰을 행하였다. 파괴강도는 3중점 굽힘 법으로 (3-point bending test) 측정하였다. 이때 시편 하부의 지지 점간의 거리는 30mm, cross-head 속도는 0.5 mm/min으로 하였고 5개의 시편을 측정하여 평균값을 구하였다.ell/\textrm{cm}^3$, 혼합재료 3은 0.123$\ell/\textrm{cm}^3$, 0.017$\ell/\textrm{cm}^3$, 혼합재료 4는 0.055$\ell/\textrm{cm}^3$, 0.016$\ell/\textrm{cm}^3$, 혼합재료 5는 0.031$\ell/\textrm{cm}^3$, 0.015$\ell/\textrm{cm}^3$, 혼합재료 6은 0.111$\ell/\textrm{cm}^3$, 0.020$\ell/\textrm{cm}^3$로 나타났다. 3. 단일재료의 악취흡착성능 실험결과 암모니아는 코코넛, 소나무수피, 왕겨에서 흡착능력이 우수하게 나타났으며, 황화수소는 펄라이트, 왕겨, 소나무수피에서 다른 재료에 비하여 상대적으로
Statement of Problem : With increasing demand of the implant-supported prosthesis, it is advantageous to use the different platform width of the fixture according to bone quantity and quality of the patients. Purpose : The purpose of this study was to assess the loading distributing characteristics of two implant designs according to each platform width of fixture, under vertical and inclined loading using finite element analysis. Material and method : The two kinds of finite element models were designed according to each platform width of future (4.1mm restorative component x 11.5mm length, 5.0mm wide-diameter restorative component x 11.5mm length). The crown for mandibular first molar was made using UCLA abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction, 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction and 200N at the buccal cusp in a 300 transverse direction individually Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment screw. Results : The stresses were concentrated mainly at the cortex in both vertical and oblique load ing but the stresses in the cancellous bone were low in both vertical and oblique loading. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading. Increasing the platform width of the implant fixture decreased the stress in the supporting bone, future and abutment screw. Increased the platform width of fixture decreased the stress in the crown and platform. Conclusion : Conclusively, this investigation provides evidence that the platform width of the implant fixture directly affects periimplant stress. By increasing the platform width of the implant fixture, it showed tendency to decreased the supporting bone, future and screw. But, further clinical studies are necessary to determine the ideal protocol for the successful placement of wide platform implants.
본 논문은 강섬유보강 콘크리트의 인성을 평가하기 위하여 비선형 파괴역학 파라메터의 하나인 J적분이 최대하중점 파괴기준이 적용될 때 휨시험으로부터 하중-처짐곡선으로부터 간편하게 사용될 수 있음을 설명하고, 강섬유로 보강된 고강도콘크리트를 대상으로 노치를 가진 휨시험편을 제작하여 3점 재하실험을 실시하고, 그것으로부터 $J_{IC}$와 선형파괴역학 파라메터인 $K_{IC}$와 $G_{IC}$를 얻고 각각을 비교 고찰하였다. 그 결과, 강섬유보강 콘크리트의 파괴인성을 평가하기 위해서는 $J_{IC}$가 $K_{IC}$나 $G_{IC}$보다 더 효과적임을 알 수 있었다. 또한 강섬유 혼입률 0.5% 이하에서는 고강도콘크리트의 인성의 증진효과가 거의 없었으나, 섬유혼입률 1.0% 이상에서는 $J_{IC}$가 뚜렸한 증가를 보이고 있어 콘크리트의 개선된 인성특성을 잘 나타내고 있었으며. $K_{IC}$나 $G_{IC}$는 그렇지 못하였다. 그러나, $J_{IC}$의 정량화에 이용하는 공시체의 크기는 $J_{IC}$의 계산에 필요한 최대강도점에서 포텐셜에너지의 변동이 적고 시험편의 취급도 간편한 공시체의 선택이 필요하며, $J_{IC}$ 의 실험적 평가에 의해서 얻어지는 결과는 최대하중점에서 얻어짐으로 인하여 최대하중점의 선정에 아주 크게 좌우되는 문제점을 가지고 있다. 따라서, 강섬유 보강 콘크리트와 같은 비균질(非均質) 재료(材料)의 경우에는 균열의 진전과정(進展過程)이 불규칙적이므로 균열 발생점을 바르게 찾아내는 측정기술(測定技術)과 정도상(程度上)외 문제점을 포함하여, 파괴인성에 대한 좀 더 바람직한 평가방법 등이 이루어져야 할 것으로 판단된다.
최근 전통적 초음파기법이 탐상할 수 없는 잠닉손상을 평가할 수 있는 잠재적 기술로서 비선형 초음파기법들에 대한 많은 관심이 있다. 비선형 초음파기법중 하나인 공진주파수 변화를 이용하는 기법은 재료의 탄성영역에서의 이력에 근거한 기술이다. 공진주파수의 변화량이 아주 작기 때문에 정교한 공진주파수 측정장치가 필요하다. 본 연구에서는 비선형 전자기음향공진기법을 적용하였다. 비선형 전자기음향공진기법은 비접촉 EMAT 센서를 사용하기 때문에 재료의 주파수 응답에 영향을 최소화할 수 있다. 3점 굽힘 피로시험을 한 알루미늄판 시편에 횡파 EMAT으로 실험을 실시하였다. 전압을 여러 레벨로 인가하며 공진을 발생시켜 잠닉손상측정에 중요한 요인중 하나인 이력 비선형 파라미터 ${\alpha}$를 공진주파수 변화로부터 산출하였다. 비손상시편과 손상시편에서의 측정된 이력 비선형 인자의 값이 서로 차이가 남을 확인하였다.
We have studied methods to save Si source during the fabrication process of crystalline Si solar cells. One way is to use a thin silicon wafer substrate. As the thickness of the wafers is reduced, mechanical fractures of the substrate increase with the mechanical handling of the thin wafers. It is expected that the mechanical fractures lead to a dropping of yield in the solar cell process. In this study, the mechanical properties of 220-micrometer-solar grade Cz p-type monocrystalline Si wafers were investigated by varying saw-damage etching conditions in order to improve the flexural strength of ultra-thin monocrystalline Si solar cells. Potassium hydroxide (KOH) solution and tetramethyl ammonium hydroxide (TMAH) solution were used as etching solutions. Etching processes were operated with a varying of the ratio of KOH and TMAH solutions in different temperature conditions. After saw-damage etching, wafers were cleaned with a modified RCA cleaning method for ten minutes. Each sample was divided into 42 pieces using an automatic dicing saw machine. The surface morphologies were investigated by scanning electron microscopy and 3D optical microscopy. The thickness distribution was measured by micrometer. The strength distribution was measured with a 4-point-bending tester. As a result, TMAH solution at $90^{\circ}C$ showed the best performance for flexural strength.
Two way grid single-layer domes are of great advantage in fabrication and construction because of the simple fact that they have only four members at each junction. But, from a point of view of mechanics, the rectangular latticed pattern gives rise to a nonuniform rigidity-distribution in the circumferential direction. If the equivalent rigidity is considered in the axial direction of members, the in-plane equivalent shearing rigidity depends only on the in-plane bending rigidity of members and its value is very small in comparison to that of the in-plane equivalent stretching rigidity. It has a tendency to decrease buckling -strength of dome considerably by external force. But it is possible to increase buckling strength by the use of roofing covering materials connected to framework. In a case like this, shearing rigidity of roofing material increases buckling strength of the overall structure and can be designed economically from the viewpoint of practice. Therefore, the purpose of this paper, in Lamella dome and rectangular latticed dome that are a set of 2-way grid dome, is to clarify the effects of roofing covering materials for increasing of buckling strength of overall dome. Analysis method is based on FEM dealing with the geometrically nonlinear deflection problems. The conclusion were given as follows: 1. In case of Lamella domes which have nearly equal rigidity in the direction of circumference, the rigidity of roofing covering materials does not have a great influence on buckling-strength, but in rectangular latticed domes that has a clear periodicity of rigidity, the value of its buckling strength has a tendency to increase considerably with increasing rigidity of roofing covering materials 2. In case of rectangular latticed domes, as rise-span-ratio increases, models which is subjected to pressure -type-uniform loading than vertical-type-uniform loading are higher in the aspects of the increasing rate of buckling- strength according to the rate of shear reinforcement rigidity, but in case of Lamella dome, the condition of loading and rise-span-ratio do not have a great influence on the increasing rate of buckling strength according to the rate of shear reinforcement rigidity.
This study compares the differences of the fit factor by the order of wearing preference between Particulate filtering facepiece respirators(PFFR) and glasses when participants wore simultaneously and a survey of physical and visual complaint. Recognition level about fit of respirators was investigated and the educational (before- and after-) effect of the fit factor. When participants wore PFFR and glasses, physical complaints were nose pressure, slipping, nose and ear pressure, ear pressure and rim loosen, the most highly physical complaints were nose pressure. Visual complaints were demister, blurry vision, dizziness, visual field, and lens dirty, the most highly visual complaints were demister. But, there was significant difference in physical complaint such as nose pressure(10.3%), slipping (23.0%), nose and ear pressure(14.3%), and rim loosen(16.2%), visual complaint such as visual field(13.8%) and lens dirty(32.4%). For the recognition of fit of respirators, respirators fitness, leak site, an initial point and an object, faulty factor, recognition level was higher. Fit factor was increased after education of proper wearing of respirator. Change of the fit factor was smaller compared to the normal breathing and after 6 actions in case of after education. Questionnaire consisted of general characteristics and physical/visual complaint, recognition of fit. Complaints were measured after the QNFT with multiple choices. Quantitative fit factor was measured by device and compared the result of (before- and after-) educational effect. Also, we selected to 6 actions (Normal breathing, Deep breathing, Bending over, Turning head side to side, Moving head up and down, Normal breathing) among 8 actions OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The fit factor was higher after the training (p=0.000). Descriptive statistics, paired t-test, and Wilcoxon analysis were performed to describe the result of questionnaire and fit test. (P=0.05) Therefore, it is necessary to investigate the quantitative research such as training program and glasses fitting factor about the wearing of PFFR and glasses simultaneously.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.