• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.40-45
• /
• 1996

this paper presents a dynamic analysis of the high-speed spindle system for vertical machining center using finite element techniques. The computed natural frequencies are compared with the measured frequencies obtained from experimental modal analysis. The results show that the bending and twisting deformations of the spindle housign dominated in the lowest modes owing to low dynmic stiffness of the housing structure. The design parameters used in the analysis are:(a) panel thickness of the housing (b) height of the housing and (c) spindle-to-column distance of the housing. Through sensitivity analysis and optimizing simulation considering design constraints an optimal design of the spindle system has been obtained.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.635-643
• /
• 2006

In this paper, a theorectical approach is studied to predict structural performances and weight-reduction rates of hybrid bodyshells in case that the materials of roof structures are substituted. To determine other light-weight materials to be substituted for the original roof materials, bending and twisting deformations are considered under constant stiffness and strength conditions, which derive some new weight-reduction indices from a structural performance point of view. The indices derived to estimate the weight-reduction can be utilized as a good criterion at the conceptual design for material substitution of the roofs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.958-968
• /
• 1994

This paper presents a dynamic analysis of the high-speed spindle system for vertical machining center using finite techniques. The computed natural frequencies are compared with the measured frequencies obtained from experimental modal analysis. The results show that the bending and twisting deformations of the spindle housing dominate in the lowest modes owing to low dynamic stiffness of the housing structure. The design parameters in the analysis are : (a) panel thickness of the housing (b ) height of the housing, and (c) spindle-to-column distance of the housing. Through sensitivity analysis and optimizing simulation considering design constraints, an optimal design of the spindle system has been obtained.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.17-26
• /
• 2007

In this paper, a theoretical approach is studied to predict structural performances and weight reduction rates of a car-body with shell type sections in case that its materials have to be substituted. For the material substitution design of a car-body, bending, axial and twisting deformations are considered under constant stiffness and strength conditions, which utilize some new indices derived from a structural performance point of view. The developed indices to measure the weight reduction by the material substitution give good guidelines on conceptual design of car-bodies.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1071-1082
• /
• 2005

In this paper is studied a theoretical approach to predict structural performances and weight reduction rates of a carbody with shell type sections in case that its materials have to be substituted. For the material substitution design of a carbody, bending, axial and twisting deformations are considered under constant stiffness and strength conditions, which utilizes some new indices derived from a structural point of view. The developed indices to measure the weight reduction by the material substitution give good guidelines on conceptual design of carbodies.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.18-30
• /
• 2006

In this paper is studied a theoretical approach to predict structural performances and weight reduction rates of a car-body with shell type sections in case that its materials have to be substituted. For the material substitution design of a car-body, bending, axial and twisting deformations are considered under constant stiffness and strength conditions, which utilize some new indices derived from a structural performance point of view. The developed indices to measure the weight reduction by the material substitution give good guidelines on conceptual design of car-bodies.

• 한국의상디자인학회지
• /
• 제8권3호
• /
• pp.17-25
• /
• 2006

We performed the objective sensibility evaluation on knitted fabrics by the following procedures: setting acrylic fabrics with knitted fabrics as basis, knitted five kinds of blended spun yarns and four kinds of twisted filament yams made by different twisting methods(the amount and direction of twist) then, measuring mechanical properties in the use Kawabata Evaluation System, obtaining hand values and total hand values. The results are as follows: First, A(F)/W acrylic/wool spun knits obtain high scores in bending, compressing, shear properties, MMD, and thickness among five kinds of acrylic-blended knit fabrics. A(S)/W acrylic/wool blended knit represented prominent values at compressing properties and thickness and so wool-blended yams demonstrated superior characters comparing other blended yarns. To contrast, acrylic/rayon blended knits showed low scores in bending properties, shear properties and thickness, so that it affects to total hand values. On the one hand, among the four kinds of acrylic filament knitted fabrics, they do not exhibit any notable dynamic differences such as tensile properties of knitted fabrics by the twist number and direction of filament yarns, bending, shear, compressing properties, weight and thickness except surface properties. Second, fabrics showed the most high score at FUKURAMI (fullness and softness) among the hand values. A(S)/W acrylic/wool blended knits obtaining the lowest values at SAHRI (crispness) outrank at total hand values, so that it was the predominant knitted fabric in objective sensibility evaluation. In total hand values, five kinds of acrylic blended knits got a higher score than four kinds of acrylic filament knits, and the amount and direction of twist did not influence on total hand values among the four kinds of acrylic filaments.

• 한국치위생학회지
• /
• 제12권4호
• /
• pp.685-693
• /
• 2012

Objectives : This research was conducted to find the subjective symptoms of musculoskeletal system for main jobs and job posture. Methods : A survey was conducted from September 15, 2011 to October 7, 2011 and 357 dental hygienists were responded. The survey was consisted of the working environment and medical equipments, psycho-social characteristics, health habits and education, job posture, subjective symptoms of musculoskeletal system pain, and so on. Results : In the survey on the frequency of job posture of dental hygienists by jobs, said they cast down or tilt their head by 15 degrees or more or twist or bend their back. The result of the analysis on the subjective symptoms of musculoskeletal system by main job showed that they experienced a pain in neck, shoulder, and back, although the order differed. The order of subjective symptoms of musculoskeletal system for casting down or turning head by 15 degrees or more, twisting or bending back, having shoulders not parallel to the ground, sitting at the end of a chair, and supporting the whole body with one leg or pressing on a pedal for treatment was from the shoulders to the neck to the back. The order of subjective symptoms of musculoskeletal system for having arms too far from the body or hunching for treatment and bending wrists inward or outward for treatment was from the shoulders to the back to the neck. Conclusions : Due to the characteristics of the job which requires one to have a proper view of a patient's oral cavity, most of the postures included casting down of head or bending of back. Therefore a development of new postures is needed to replace the existing job postures which pressure the musculoskeletal system. And shift rotation can be used as a preventive measure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1235-1236
• /
• 2015

This paper reports hyperelastically stretchable strain gauges based on liquid metal (eutectic gallium-indium;EGaIn) and a platinum-catalyzed silicone elastomer ($Ecoflex^{TM}$). A custom liquidmetal patterning setup was operated to fabricate liquidmetal straingauge on flexible substrate. The printed strain gauges were tested under cyclic uniaxial stretching, twisting, even bending of human finger. By engineering the orientation of solid wires placed over two terminals of t he printed liquid metal resistor, we stably achieved the stretchability of ~800 % which is the highest value reported so far, to the best of our knowledge.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2456-2458
• /
• 1999

The polarization mode dispersion (PMD) that restricts the transmission bandwidth was investigated in standard long single mode fiber which optimized at 1.3${\mu}m$. Although fiber has perfect circular symmetry, each optical fiber has different refractive index profiles. The investigation of PMD with random mode couplings were conducted in three kinds of fiber by the time-domain interferometric method. By using two manufacturing methods, MCVD(Modified Chemical Vapor Deposition) method and VAD(Vapor Phase Axial Deposition) method, the property of mechanical asymmetric lateral pressure, bending and twisting induced polarization mode dispersion were measured. The concatenated optical fibers were compared with other types.