• 한국컴퓨터그래픽스학회논문지
• /
• 제16권2호
• /
• pp.1-7
• /
• 2010

본 논문에서는 큰 회전 변형이 일어나는 가는 막대를 실시간에 시뮬레이션하는 기법을 제안한다. 가는 막대는 로프나 머리카락과 같이 일차원적인 구조를 표현하는데 널리 사용될 수 있다. 시각적으로 사실적인 가는 막대의 애니메이션을 실시간에 생성하는 것은 컴퓨터 그래픽스분야에서 오랫동안 주요한 도전 과제였다. 본 논문에서는 연속체 역학에 기반한 지배방정식을 세우고 이를 실시간에 적분하는 가는 막대구조를 위한 모달와핑기법을 개발한다. 이와같은 새로운 시뮬레이션 기법은 삼차원 솔리드를 위해 개발된 종전의 모달 와핑 기법을 확장한 것이다. 본 논문에서 제안한 방법은 매우 많은 정점으로 이루어진 가는 막대 구조의 큰 휨과 꼬임변형도 실시간에 사실적으로 생성할 수 있다.

• 융복합기술연구소 논문집
• /
• 제1권1호
• /
• pp.9-12
• /
• 2011

Structural analysis of a tire is done using a commercial software, ANSYS Workbench. The properties of rubber of the tire is represented using a Mooney-Rivlin model. The bead in the tire is made of structural steel. 3D CAD model of the tire is obtained from a commercial CAD-specialized software, CATIA. Using an imported 3D CAD geometric model, a mesh system with fifty thousand nodes is constructed using ANSYS. A time-variant point force is applied to the rim of the tire, and the deformation of the tire is computed. It is found that both bending and twisting of the tire are observed where the point force is applied. The deformation of the tire is asymmetric, which results in the help of ripping the tire using the helper. It is also found that the deformation undergoes linearly with the applied force. When the force is larger than 1500N, then the deformation becomes larger than the half of the thickness of the tire. In the future, a more realistic rubber model will be applied and validated with the measured data.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1130-1139
• /
• 2001

Springs are widely utilized in machine element. To find out stiffness of coil spring, the space beam theory using the finite element method is adopted in this paper. In three dimensional space, a space frame element is a straight bar of uniform cross section which is capable of resisting axial forces, bending moments about two principal axes in the plane of its cross section and twisting moment about its centroidal axis. The corresponding displacement degrees of freedom are twelve. The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculated the another increments of nodal displacements, that is, the step by step method is used in this paper. The results of the finite element method are fairly well agreed with those of various experiments. Using MATLAB program developed in this paper, spring constants can be predicted by input of few factors.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.21-27
• /
• 2001

Springs are widely utilized in machine element. To find out stiffness of frustum-shaped coil spring, the space beam theory using the finite element method is adopted in this paper In three dimensional space, a space frame element is a straight bar of uniform cross section which is capable of resisting axial forces, bending moments about two principal axes in the plane of its cross section and twisting moment about its centroidal axis. The corresponding displacement degrees of freedom are twelve. To find out load vector of coil spring subjected to distributed compression, principle of virtual work is adapted The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculate the another increments of nodal displacements, that is, the step by step method is used in this paper. The results of the finite element method are fairly well agreed with those of various experiments. Using MATLAB program developed in this paper, spring constants and stresses can be predicted by input of few factors.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.100-112
• /
• 2011

This paper studied on a theoretical approach to predict structural performances and weight -reduction rates of hybrid bodyshells in case that the material of underframe structure is substituted. To choose other light-weight materials to be substituted for the original underframe material, compressive, bending and twisting deformations are considered under constant stiffness and strength conditions, which derive some new weight-reduction indices from a structural performance point of view. Next, these weight-reduction indices were verified using the finite element analyses of some simplified examples. It is shown that the derived indices to estimate the weight-reduction can be utilized as a good criterion for material substitution of the underframe at a basic design stage.

• 대한인간공학회지
• /
• 제31권2호
• /
• pp.345-352
• /
• 2012

Objective: The aim of this study is to evaluate the accuracy and reliability of Spine-Pelvis Monitor(SPM) that was developed to measure 3-dimensional motion of spine and pelvis using tilt sensor and gyro sensor. Background: The main cause of low back pain is very much associated with the task using the low back and pelvis, but no measurement technique can quantify the both spine and pelvis. Method: For testing the SPM, 125 angles from three anatomical planes were measured three times in order to evaluate the accuracy and reliability. The accuracy of SPM in measuring dynamic motion was evaluated using digital motion analysis system. The motion pattern captured by two measuring methods was compared with each other. In result, the percentage error and Cronbach coefficient alpha were calculated to evaluate the accuracy and reliability. Results: The percentage error was 0.35% in flexion-extension on sagittal plane, 0.43% in lateral bending on coronal plane, and 0.40% in twisting on transverse plane. The Cronbach coefficient alpha was 1.00, 0.99 and 0.99 in sagittal, coronal and transvers plane, respectively. Conclusion: The SPM showed less than 1% error for static measurement, and showed reasonably similar pattern with the digital motion system. Application: The results of this study showed that the SPM can be the measuring method of spine pelvis motion that enhances the kinematic analysis of low back dynamics.

• 한국가구학회지
• /
• 제23권1호
• /
• pp.26-37
• /
• 2012

This is the study about the New Formation Developement, the Changeable Table Design with Units that made of Wasted Wood to use restricted material rationally and to improve the space efficiency in the Table Design. We made some changeable table design with units that made of laminated wood wasted. And we found out the following formative characteristic and physical merits through this study. First, the space efficiency can be improve technically through the unit combination and organic transfomation of the specific form and a new method by laminated wood make the personal originality and the structral stability be built up. Second, there are some merits, moveable convenience and variable layout by the combination or transformation or personal fondness so that economical efficiency and variable of design can be improved. Third, we can remove original faults inside wood like a knot or not-uniform of wood organ when we laminate wood so that we use proper units that have original beauty of wood and can represent mild mood of furniture wholly. Fourth, much more strengthen tensile strength by the reciprocal action among the units that be made of laminated wood reduces wood's metamorphosis like bending or twisting so that the uniformity of wood can be gain and furniture's metamorphosis can be reduced. According to changes of nature environment, the difficulty of supply and demand for wood may be happen. According to changes of life style these days, supply and demand for environment friendly material, processing technique and developement of design to improve the efficiency of using space must be very important factor in morden furniture design. So we propose changeable furniture design by using new environment friendly meterial and processing method from this study.

• 마이크로전자및패키징학회지
• /
• 제31권1호
• /
• pp.7-15
• /
• 2024

유연신축성 전자 디바이스의 다기능화, 소형화 및 고출력화 추세에 따라 우수한 열 전달 특성을 갖춘 재료나 구조가 이슈로 부상하고 있다. 기존의 열계면 소재는 급격한 구부림, 비틀림, 신축 등을 겪어야 하는 유연신축성 전자 디바이스의 방열 요구성능을 충족시키지 못한다. 이러한 문제를 해결하기 위하여 높은 열전도성과 신축성을 동시에 갖는 열계면 소재 개발이 요구된다. 본 논문에서는 Liquid metal, Carbon, Ceramic 기반 신축성 열계면 소재의 연구동향을 살펴보고 열적, 기계적 특성 향상을 위한 효과적 전략을 알아보고자 한다.

• 한국산업보건학회지
• /
• 제15권1호
• /
• pp.61-70
• /
• 2005

This study investigated the spinal loads(L5/S1 disc compression and shear forces) predicted from four biomechanical models: one EMG model and three optimization models. Three objective functions used in the optimization models were to miminize 1) the cubed muscle forces : MF3, 2) the cubed muscle stress : MS3, 3) maximum muscle intensity : MI. Twelve healthy male subjects participated in the isometric voluntary exertion tests to six directions : flexion/extension, left/right lateral bending, clockwise/ counterclockwise twist. EMG signals were measured from ten trunk muscles and spinal loads were assessed at 10, 20, 30, 40, 50, 60, 70, 80, 90%MVE(maximum voluntary exertion) in each direction. Three optimization models predicted lower L5/S1 disc compression forces than the EMG model, on average, by 31%(MF3), 27%(MS3), 8%(MI). Especially, in twist and extension, the differences were relatively large. Anterior-posterior shear forces predicted from optimization models were lower, on average, by 27%(MF3), 21%(MS3), 9%(MI) than by the EMG model, especially in flexion(MF3 : 45%, MS3 : 40%, MI : 35%). Lateral shear forces were predicted far less than anterior-posterior shear forces(total average = 124 N), and the optimization models predicted larger values than the EMG model on average. These results indicated that the optimization models could underestimate compression forces during twisting and extension, and anterior-posterior shear forces during flexion. Thus, future research should address the antagonistic coactivation, one major reason of the difference between optimization models and the EMG model, in the optimization models.

• 지역사회간호학회지
• /
• 제7권1호
• /
• pp.100-117
• /
• 1996

The purpose of the survey was to find out the prevalence rate and related factors for low back pain of nurses and to develop educational program for prevention of the low back pain. The subjects of the survey were 593 nurses of general hospitals in Tae-gu City. The survey was conducted from June 10, 1994 to October 3, 1994. The questionnaire included 34 question items concerning general characteristics, factors related to low back pain, physical nursing activities, and characteristics of low back pain. The results were as follows : 1. Among 593 of subjects, the prevalence rate of low back pain showed 62.1%. 2. In relation of health related life activities and low back pain prevalence, self-reported health state was highly significant(P=.000). 3. In relation of work environmental factors and low back pain prevalence, job satisfaction (P=.026), job stress(P=.020), and workload(P=.002) were significant. 4. In relation of physical nursing activities and low back pain prevalence, bending (P=.000), trunk twisting(P=.003), stretching(P=.006), and pulling and pushing(P=.046) were significant. 5. Physical nursing activities inducing back stress was varicant according to wards. The results of this study pointed out that the subjects' low back pain prevalence was related to the work-related physiologic and psychologic factors. Therefore, for the effective prevention of low back pain, both practicing the body mechanics and raising the morale of the nurses are needed in educational program.