• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.55-65
• /
• 1989

In this paper, the bellows problem under axial load were investigated. A modified energy theory, which has the improved strain energy and stress description taken from governing equation of general shells of revolution, were proposed. From the analysis, the results obtained from the modified theory were more accurate and in stable state with varing geometric parameter of bellows than those of other theory.

• Journal of KSNVE
• /
• v.9 no.2
• /
• pp.331-339
• /
• 1999

This paper presents the simplified formulas for calculating the fundamental frequencies of the cantilevered bellows in the axial and lateral directions. The frequencies of the bellow are evaluated based on analogies with those of the beam. It is shown that the results calculated by the simplified formulas are in good agreement with those obtained from FEM analysis and the experiment.

• Laser Solutions
• /
• v.16 no.3
• /
• pp.22-26
• /
• 2013

Fiber laser welding was performed on SUS Materials metal bellows. The results can be summarized as follows: When we tried to change welding focus location. we get the best welding line when focus location placed 0mm. In product welding, We could make a satisfactory product in constant area by applying optimized conditions and show a table that is able to help producer easily to apply it to manufacturing. In comparison with existing TIG and plasma welding, welded bellows by fiber laser has faster processing speed, smaller thermal effect, very narrow welding area and fine surface.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1667-1672
• /
• 2007

In order to assess the reliability of the exhaust bellows for automobiles, accelerated life test model and procedure are developed. By using this method, failure mechanism and life distribution are analyzed. The main results are as follows; i) the main failure mechanism is crack or breakage of inner flexible tube by shaken displacement at shear direction. ii) temperature is a second factor to affect a failure. iii) the life distribution of exhaust bellows is fitted well to Weibull life distribution and the shape parameter is 13.3 on condition of shaken displacement and $600^{\circ}C$

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.2
• /
• pp.144-149
• /
• 2006

This paper describes a novel automated analysis system for bellows of piping system. An automatic finite element (FE) mesh generation technique, which is based on the fuzzy theory and computational geometry technique, is incorporated into the system, together with one of commercial FE analysis codes and one of commercial solid modelers. In this system, a geometric model, i.e. an analysis model, is first defined using a commercial solid modelers for 3-D shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay triangulation technique is introduced as a basic tool for element generation. The triangular elements are converted to quadrilateral elements. Practical performances of the present system are demonstrated through several analysis for bellows of piping system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1833-1840
• /
• 1993

An efficient vibration analysis method, Component Mode Synthesis(CMS), for an exhaust system with bellows is presented. Analyses are performed for two types of bellows, where characteristics of vibration modes affecting idle shake and interior noise of a vehicle are examined. Also analyzed are the contributions of an exhaust and engine mounting system to the idle shake and interios noise. Comparison between the analysis and test is in good agreement, hence the CMS method is shown to be efficient and valid.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.304-308
• /
• 2006

The focus of this study is modeling technique for a bellows in vehicle exhaust system. Bellows was developed using tile finite element model by replacing with the equivalent beam. The equivalent beam model were studied in detail. Non-structural node in the cross section of original model is given to expressing their motion. Equivalent mass matrix and stiffness matrix calculated using Guyan reduction method. Material Properties of beam was obtained from the direct comparison between equivalent model and that of Timoshenko beam model. The calculated natural frequencies and mode shape are compared with the reference results and coincided well. The results were compared with the confirmed results, which were in good agreement.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.1
• /
• pp.58-63
• /
• 2006

This paper describes a novel automated analysis system for bellows of piping system. An automatic finite element (FE) mesh generation technique, which is based on the fuzzy theory and computational geometry technique, is incorporated into the system, together with one of commercial FE analysis codes and one of commercial solid modelers. In this system, a geometric model, i.e. an analysis model, is first defined using a commercial solid modelers for 3-D shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay triangulation technique is introduced as a basic tool for element generation. The triangular elements are converted to quadrilateral elements. Practical performances of the present system are demonstrated through several analysis for bellows of piping system.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.973-977
• /
• 2004

A pneumatic cylinder used to sliding seal which seal the element one to another in relative motion. It is difficult to accuracy control because of adhesion phenomenon. To confirm this phenomenon, it is carried to friction force test and analysis for bellows type rodless cylinder. In the rodless cylinder of this type, friction force test is very important. Through the theoretical analysis of shock absorber obtained the optimal design of bellows type rodless cylinder. As the result of the friction force test, LM Guide type is suitable for work under low friction force.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.279-282
• /
• 2011

The analysis and experimental results for the bellows of gasgenerator liquid oxygen shut-off valve are presented. The analyses are performed using EJMA (Expansion Joint Manufacturing Association) standard and the commercial FE (finite element) analysis program, Abaqus v6.9, at room and cryogenic temperatures. The results include the spring rate, the stress and the fatigue life of the bellows. The effects of the contact and material plasticity on the FE analysis results are also analyzed.