• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.57-62
• /
• 1983

The galvanic anodes have three kinds of Zn alloy anode, Al alloy anode and Mg alloy anode, which are widely used in cathodic protection for all metal structures in water or under ground. This paper to be used for designing of the grounding cell has reached the following conclusion as the results of an experimental study on the characteristics of such galvanic anodes for corrosion protection of pipings: 1) Zn alloy anode was the best when the specific resistance of the environment was bellow 1000 $\Omega$.cm, and when above 1000 $\Omega$.cm, Mg alloy anode to be used for designing of the grounding cell was the best. 2) Al alloy anode was better than Mg alloy anode for grounding cell when the specific resistance was bellow 500 $\Omega$.cm, but the Al alloy anode in all the environments reduced the characteristics of galvanic anode to the lower grade than those of Zn alloy anode. 3) Each impressed voltage (E) of the anodes at which drainage current density ($\rho$) begins rapidly increasing is quantitatively presented as follows: \circled1 E sub(Zn)=log (4.9465/$\rho$super(0.0639))+11$\times$10 super(-6)$\rho$super(0.8923i) \circled2 E sub(Al)=log (4.9306/$\rho$super(0.0525))+13$\times$10 super(-6)$\rho$super(0.9314i) \circled3 E sub(Mg)= log (3.7086/$\rho$super(0.0988))+181$\times$10 super(-6)$\rho$super(0.5406i) 4) The empirical equations between the drainage current density (i) and impressed environment are modeled as the following type. logi=g+root(n.E+r)(g,n,r; constants)

• Journal of Engineering Education Research
• /
• v.17 no.2
• /
• pp.11-24
• /
• 2014

The purpose of this study is to develop a teaching-learning model of convergence project based on team teaching. Based on development research methodology which explored a university case, the teaching-learning model was developed including three phases such as preparation, planning, and implementation & evaluation. The preparation phase has three steps as follows: to organize team teaching faculty; to develop convergence projects cooperated by industry and university; and to design instructions based on supporting convergence projects. The last step of preparation phase consists of five design activities of: (1) instructions and teaching contents; (2) communication channel among faculty members; (3) feedback system on students' performance; (4) tools to support learners' activity; and (5) evaluation system. The planning phase has two steps to analyze learners and to introduce and modify instruction and themes of convergence projects. The implementation & evaluation phase includes five steps as bellow: (1) to organize project teams and match teams with faculty members; (2) to do team building and assign duties to students of a team; (3) to provide instruction and consulting to teams; (4) to help teams to conduct projects through creative problem solving; and (5) to design mid-term/final presentation and evaluation. Lastly, the research implications and limitations were discussed for future studies.

• English Language & Literature Teaching
• /
• v.12 no.3
• /
• pp.211-226
• /
• 2006

This paper examines the crisis of the protagonist's Jewish identity in Philip Roth's Portnoy's Complaint. Jewish values are centered on the philosophy of Judaism and Jewish history. Judaism is based on an ethical monotheism which is Bible-centered. It is characterized by its covenant with God, its humanism, and its emphasis on moral action. It provides essential reasons for man's existence and stresses human confidence and sufficiency. Jewish values can be found in words such as "good," "humanity," "dignity," "responsibility," and "sense of community." These positive Jewish values pervade Philip Roth's fiction paradoxically. Throughout especially Portnoy's Complaint, the protagonist fails to embrace Jewish values in contrast to Bellow or Malamud's heroes and repeat the same mistakes eliciting fits of laughter from readers. The protagonist suffers from his strongly-felt ethical and altruistic impulses perpetually warring with his extreme sexual longings against which he struggles. His desperation grows as he finds himself unable to channel his dissatisfaction and change his situations. His dominating mother and his confusion over Jewishness and Americanism are the main obstacles to his establishment of self-identity. He attempts to build up his gender identity and Jewish identity through his ego-centric sexual relationship with shikses(female gentiles). His inability to embody Jewish values leads to the failure to fulfill his identity. Roth paradoxically shows that the protagonist's realization of Jewishness is essential to the cure for his fragmented self.

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.307-312
• /
• 2003

Hollow fiber was prepared from the blend of a high density polyethylene (HDPE)/ultra high molecular weight polyethylene (UHMWPE). The changes in the morphology and mechanical property of the hollow fiber were investigated. The commercial product (Sterapore), having a high water permeability, was analyzed with viscosity measurement and FT-IR. The molecular weight of Sterapore was very high and its surface was coated with a vinyl alcohol/vinyl acetate copolymer. The content of UHMWPE in the HDPE/UHMWPE blend was limited below 10 wt%. In order to improve the dispersion of UHMWPE, a mineral oil should be introduced in the blend. The morphology and mechanical property of the hollow fiber of HDPE/UHMWPE blend were similar to those of the commercial product.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.977-982
• /
• 2012

We investigated the characteristics of subjects in marine leisure activities and the wearing conditions of a rash guard through a consumer survey. The questionnaire examined the number of rash guards owned by different styles, wearing size, choice of rash guard compared with ordinary clothes, and the satisfaction in a rash guard (color, textile, size, quality, price, function, and design) using Likeret Scales. The subjects were 105 adult men and the data analysis utilized an SPSS 20.0 Package. The results were significant for wearing conditions correspondent with the marine leisure activities. More years of experience resulted in a higher number of rash guards owned. A higher level of participation in sport resulted in more different styles of rash guards. More years of experience resulted in an increase preference for tight rash guards. In the case of wearing L and XL size that selected the smaller rash guard over the ordinary clothes, it was evaluated at "satisfaction" level in color, textile, size, quality, function, design. In the case of wearing XS, S and M size that did the larger and same as ordinary, it was at "ordinary" level and bellow.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.608-612
• /
• 2012

To reduce these costs and time by finite element analysis program has been much research (3~4). At virtual CAE program as like Abaques, Ansys, Ls-dyna and Nastran, the input data of material is got bellow coupon test. In case of carbon composite, it is also put in lamina/laminate properties. There have big problem. If you want to simulate FW(filament winding or wind blade) how do you input material data. Each area of FW is different stacking conditions. It's too hard that each area is tested for inputting lamina or laminate properties. The composite structure increasing load is applied occurred as the matrix dependence of the crack-induced nonlinearity and nonlinear mobility appears since the initial damage. And uni-direction for this research applies the theory to have been confined to. On this study, we are going to get basically fiber properties and matrix than carbon composite properties for simulating according stacking method by GENOA-MCQ. It is help to simulate easily composite material. Also Calculate the matrix nonlinear for simulating non-linear.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.3
• /
• pp.96-104
• /
• 1983

In wire transmission systems using a coaxial cable or cable pair, the cable loss caused by the transmission characteristic of the cable varies depending on the length of the cables or variation in the ambient temperature, and usually takes the form close to a $\sqrt f$ characteristic. In order to compensiate for such loss, an actove variable automatic equalizer with a tandam combination of feedback and feedforward was presented. The automatic equalizer to be described here overcomes many of the disadbantages associated with the conventional passive variable equalizers, which include the need for inducters, a complex design procedure, and incompatibility with modern dldctronic control systems that are very complicated. This design has advanatges over other active variable equalizer design and it is especially applicable to precision equalization at frequencies bellow 1MHz.

• Journal of Chest Surgery
• /
• v.20 no.4
• /
• pp.688-694
• /
• 1987

At the Dept. of Thoracic and Cardiovascular Surgery of Pusan National University Hospital, postoperative cardiac catheterizations were performed in 12 patients of ventricular septal defect with severe pulmonary hypertension [Pp/Ps>0.75], who were operated during the period from July 1981 to Dec. 1986. The mean age of the patients preoperatively was 12.4 [range: 4-18] year-old and the mean follow-up duration was 25.8 [range: 8-53] month per patient. In comparison with the preoperative data, the systolic pulmonary artery pressure [SPAP] was decreased from 103.6*18.4 to 70.4*35.9 mmHg [p<0.01] and the Pp/Ps was decreased from 0.89*0.10 to 0.58*0.27 [p<0.01]. But the Rp/Rs and Rp were not meaningfully changed, from 0.31*0.16 and 7.6*0.4 unit to 0.41*0.32 and 8.0*6.6 unit, respectively. The preoperative Qp/Qs was bellow 2.0[mean: 1.6] in 3 out of 4 cases whose postoperative Rp/Rs and Rp were above 0.75 and 15 unit, respectively. On the contrary, the preoperative Qp/Qs was above 2.0 [mean: 3.5] in all of the 8 cases, whose postoperative Rp/Rs and Rp were below 0.50 and 10 unit, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.496-499
• /
• 2008

The noise reducing devices installed on the noise barrier have been developed in many shapes and ways to reduce noise around road traffic areas. In this study, test and estimation method for the noise reducing device witch installed on the top of a noise barrier was suggested. For this, the authors have considered sound power flow around the device and sound pressure levels for the far field area. To estimate the area effect behind the barrier, area average of noise pressure level difference divided by two area, upper and bellow the sight-line. Comparing the attenuation difference of these areas, the tendency of noise reduction effect was studied according to type of noise reducing devices. Compared with noise shielding efficiency of the devices that using equivalent height of a simple barrier calculated by the SoundPlan, the commercial environment noise simulation software.

• Structural Engineering and Mechanics
• /
• v.33 no.5
• /
• pp.635-647
• /
• 2009

For the calculation of foundation settlement it is recommended to take into account so called influence zone inside the subsoil bellow the foundation structure. Influence zone inside the subsoil is the region where the load has a substantial influence on the deformation of the soil skeleton. The soil skeleton is pre-consolidated or over consolidated due to the original geostatic stress state. An excavation changes the original geostatic stress state and it creates the space for the load transferred from upper structure. The theory of elastic layer in Westergard manner is selected for the vertical stress calculation. The depth of influence zone is calculated from the equality of the original geostatic stress and the new geostatic stress due to excavation combined with the vertical stress from the upper structure. Two close formulas are presented for the influence zone calculation. Using ADINA code we carried out several numerical examples to verify the proposed analytical formulas and to enhance their use in civil engineering practice. Otherwise, the FEM code accuracy can be control.