• Journal of the Korean Geosynthetics Society
• /
• v.2 no.1
• /
• pp.47-55
• /
• 2003

The effects of fiber composition factors of 14 geotextiles which are thickness, porosity, fiber length and diameter etc. on the transmissivity were examined and in-plane permeability of geotextiles under thickness change, transmissivity, confined load were analyzed by the constitutive equations. And the effects of laminar structure on the permittivity of laminar geotextile composites which were manufactured with fiber packing densities were assessed. Transmissivities were increased with thickness of geotextiles and in-plane permeability coefficients were increased with porosity and fiber diameter. The effects of porosity were decreased with normal stress and slightly increased with fiber length. Transmissivities were increased with fiber diameter and showed same tendensy for the same fiber length. Permittivities of laminar geotextile composites were influenced by the waterhead loss in the inner interface and the connection shape of these composites to water path was interpreted as bell mouth type or soft flux pipe type.

• Geomechanics and Engineering
• /
• v.27 no.5
• /
• pp.497-509
• /
• 2021

A large deformation FEM (Finite Element Method) based numerical analysis has been performed to study the behaviour of the bell-shaped anchor embedded in undrained saturated (cohesive) soil with the help of finite element based software ABAQUS. A typical model anchor with bell-diameter of 0.125 m, embedded in undrained saturated soil with varying cohesive strength (from 5 kN/m² to 200 kN/m²) has been chosen for studying the characteristic behaviour of the bell-shaped anchor installed in cohesive soil. Breakout factors have been evaluated for each case and verified with the results of experimental model tests for three different types of soil samples. The maximum value of breakout factor was found as about 8.5 within a range of critical embedment ratio of 2.5 to 3. An explicit model has been developed to estimate the breakout factor (F_c) for uplift capacity of bell-shaped anchor within clay mass in terms of H/D ratio (embedment ratio). It was also found that, the ultimate uplift capacity of the anchor increases with the increase of the value of cohesive strength of the soil and H/D ratio. The empirical equation developed in the present investigation is usable within the range of cohesion value and H/D ratio from 5 kN/m² to 200 kN /m² and 0.5 to 3.0 respectively. The proposed model has been validated against data obtained from a series of model tests carried out in the present investigation. From the stress-profile analysis of the soil mass surrounding the anchor, occurrence of stress concentration is found to be generated at the joint of anchor shaft and bell. It was also found that the vertical and horizontal stresses surrounding the anchor diminish at about a distance of 0.3 m and 0.15 m respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.295-301
• /
• 2015

Target strength (TS) information is an important parameter that estimates the detection, distribution, and abundance of Aurelia aurita. In order to investigate the biological TS of jellyfish, some factors such as size (bell diameter), tilt angle, pulsation, and symbion should be known. In the ex situ TS measurements, the tilt angles and pulsation from synchronized swimming behavior of four live A. aurita (bell diameters in the air: 54.2 ~ 94.2 mm) were measured with the acoustic data at 70 kHz. The reduced target strength (RTS) of A. aurita was found to change ranged from 13.4 ~ 16.5 dB according to the incidence angles from $-30^{\circ}$ to $24^{\circ}$. When the change rate of bell diameter in the water was 0.2, the TS value showed a 7.2 dB change. These results could be utilized as an important data to understand the acoustic characteristic scattering of A. aurita.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.5
• /
• pp.551-556
• /
• 2010

The large jellyfish Nemopilema nomurai causes serious damage to fisheries, particularly around the seas of Korea and Japan. Decreasing this damage requires knowledge of the distribution and abundance of jellyfish. Acoustic technology using quantitative echosounders is one method of studying the distribution and abundance of jellyfish. Such methods are commonly used worldwide because they have the advantage of providing substantial information about all water layers in a wide area in a short time. However, in order to conduct an acoustic survey, the acoustic characteristics of the target organism must be known. These can be altered by a number of factors, including pulsation, swimming angle, frequency and size. Accordingly, this study determined the variation in target strength according to pulsation of N. nomurai. Data were analyzed for two jellyfish with bell diameters in air of (a) was 32.0 and (b) 25.0 cm. The pulsation cycle of jellyfish (a) was 1.5~2.0 sec and the target strength (TS) cycle was 1.0~2.5 sec, while jellyfish (b) had a pulsation cycle of 1.0~1.5 sec and TS cycle of 1.0~3.0 sec. The variation width of the TS with the change in pulsation was 7.8 dB (-72.4~-64.6 dB) for jellyfish (a) and 10.3 dB (-71.6~-61.3 dB) for jellyfish (b). The variation in bell diameter was about 0.28 and 0.35, respectively. These results confirmed that the variation in bell diameter caused by pulsation is closely related to the variation in TS.

• The KSFM Journal of Fluid Machinery
• /
• v.3 no.2 s.7
• /
• pp.44-49
• /
• 2000

Small sonic nozzles (throat diameter $0.28{\~}4.48mm$) were tested in the gas flow standard system. This standard system is composed of two bell provers and 5 column piston provers, compressor, filters, and dehumidifier. The discharge coefficients of small some nozzles are obtained and correlated as a function of throat Reynolds numbers with $0.316\%$ uncertainty at a confidence level $95\%$. The tested high Reynolds number was the lower limit of ISO 9300 specifications. The data are useful as data base for revision of ISO 9300.

• Archives of Plastic Surgery
• /
• v.33 no.1
• /
• pp.87-94
• /
• 2006

This study is to investigate the patients who had blepharoplasty for cosmetic purposes or facial nerve disorders. 21 patients were examined with an age from 17 to 63 years. Sixteen cases were classified as a normal group for investigation of the histopathologic change according to the age. The rest were patients of Bell's palsy(2), $Botox^{(R)}$ injection(2) and blepharospasm (1). We measured a mean diameter of myofiber and dimension's proportion of muscluar tissue per regular visual field. First, we measured a statistical significance according to the age in normal cases by grouping them into younger than 30-year-old, 30's, 40's, 50's and 60's. Second, we divided normal cases(16) into Group A and B by two bases for statistical analysis. In conclusion, although there were several differences as vacuolation, internalization of sarcolemnic nuclei between 35-year-old and 62-year-old patients in simple comparison, there was no uniform decrease according to the age. There were also no significant statistical changes in the value of a diameter of myofibers and dimension's proportion of muscular tissue according to the age in any of the two normal groups. But in $Botox^{(R)}$ injection and Bell's palsy, blepharospasm patients, two values showed remarkable difference compared to the normal group of same age.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1473-1482
• /
• 2013

A disc-type rotary atomizer affords advantages such as superior paint transfer efficiency, uniformity of paint pattern and particle size, and less consumption of compressed air compared to a spray-gun-type atomizer. Furthermore, it can be applied to all types of painting materials, and it is suitable for large-scale processes such as car painting. The painting quality, which is closely related to the atomizer performance, is determined by the uniformity and droplet size in accordance with the design of the bell disc surface. This study establishes the basics of how to design a surface by modeling the operating bell disc's RPM, diameter, surface angle, and film thickness considering dye characteristics such as the viscosity, density, and surface affinity.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.101-106
• /
• 2014

The purpose of this research was to figure out the stand structure and growth characteristic with relation to DBH, height, and volume in sixteen Pinus koraiensis plantations of Gangwon province region. Age class was diversely distributed from age class II (16 yr) to age class VIII (77 yr), and, in terms of site index, sixteen regions were superior: nine regions 'high', seven regions 'middle'. The distribution of DBH by sites appeared a bell-shaped curve, and the number of trees was the most in diameter section of 18-22 cm. The dispersion of DBH was various with age and widest ranging from 18 cm to 58 cm in age class VII-VIII. The distribution of height was also a bell-shaped curve with the smaller deviation than the distribution of DBH, and most of trees were in height section of 14-18 m. The correlation of DBH and height was high (r=0.75), and the volume bigger than 1.0 $m^3$ was presented from DBH 35 cm, height 20 m.

• Ocean Science Journal
• /
• v.43 no.1
• /
• pp.61-65
• /
• 2008

Feeding apparatus, mechanism and passage of ingested prey were described for Nemopilema nomurai (Scyphozoa: Rhizostomeae). N. nomurai medusae without central mouths have developed complicated canal systems connecting the tip of the tentacle and oral arm to the gut cavity. The number of junctions in the canal system increases with the bell diameter. The prey is gathered by paralyzing nematocyst at the tentacles and by adhering cirri at the oral arms and scapulets. They are engulfed into the terminal pore located at the oral arms and scapulets, and entered into the gut cavity via the canal system. The estimated digestion time is 1 hour and 20 min. The diameter of terminal pore is always about 1 mm, implying that they could not eat prey larger than that pore size. On the other hand, ephyrae have central mouths and could swallow prey as large as adults could. Exploitation of the same size of food by adult and ephyra implies that N. nomurai can affect seriously the whole food web, massively ingesting micro- and mesozooplankton and cutting the energy transfer toward the higher level of carnivores.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.6 no.1
• /
• pp.23-30
• /
• 1986

The optimumultrasonic test conditions for the thin carbon fiber reinforced plastic (CFRP) sheet were determined for the immersed reflector plate method. The effects of the water distance, the surface conditions of the specimen and transducer characteristics were studied. For a reliable test the water distance between the transducer and the front surface of the specimen should be determined when the beam profile of the transducer appears in the bell-shape. The detectability of the defect was improved as the effective beam width of the ultrasonic transducer became narrow. The transducer should be properly chosen considering to the surface condition of the test material as well as the size and type of the defect to be detected. It was possible to detect the flat bottom hole whose diameter is as small as about 500 micrometer.