• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3521-3531
• /
• 2012

본 연구는 도시지역 거주 노인들의 자기존중감, 상태불안, 대인의존형행동특성 및 통제신념 상호간의 관련성을 알아보고 이들 요인에 영향을 미치는 관련요인들을 파악하고자 실시하였다. 조사대상은 대전광역시에 거주하고 있는 65세 이상 노인 396명(남자 182명, 여자 214명)으로 하였으며, 조사는 2011년 4월 1일부터 6월 30일까지의 기간동안에 면접조사 하였다. 연구결과, 자기존중감은 상태불안, 대인의존형행동특성과 유의한 음의 상관관계를 보였고 통제신념과는 유의한 양의 상관관계를 보였다. 상태불안은 대인의존형행동특성과 유의한 양의 상관관계를 보였고, 통제신념과는 유의한 음의 상관관계를 보였다. 대인의존형행동특성은 통제신념과 유의한 음의 상관관계를 보였다. 단계별 다중회귀분석 결과 자기존중감에 영향을 미치는 요인으로는 IADL, 배우자 유무, 저작능 상태, 건망증이 선정되었으며, 상태불안에 영향을 미치는 요인으로는 치아의 부자유 유무, IADL, 배우자유무, 주관적인 건강상태, 신체의 부자유유무, 주관적인 수면의 질, 학력이 선정되었다. 대인의존형행동특성에 영향을 미치는 요인으로는 배우자유무, IADL, 월수입, 주관적인 건강상태가 선정되었으며, 통제신념에 영향을 미치는 요인으로는 배우자유무, 시력상태가 선정되었다. 이상과 같은 결과는 조사대상 노인들의 자기존중감, 상태불안, 대인의존형행동특성 및 통제신념은 인구사회학적 특성, 건강관련행위 특성 및 건강상태 등의 여러 변수들과 유의한 관계가 있음을 시사하고 있다.

• 대한기계학회논문집B
• /
• 제22권6호
• /
• pp.832-839
• /
• 1998

The potential work is defined as the maximum available work extractable from a composite system. It is important concept to understand the behavior of a composite system because it is a property of the composite system and shows the possible room for the system to change its state by itself. To explain this concept quantitatively, the behavior of a composite system composed of two simple ideal gas systems is analyzed. The potential work of the composite system is estimated, the various reversible processes from a given state to the equilibrium state and the processes on which potential works are constant are shown on the T-P and S-V planes. Such an effort will be necessary to understand and characteristics of composite systems as well as helpful for a deeper comprehension of the energy conversion principles.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1045-1049
• /
• 1995

This paper proposes the state-space model of the thermal behavior of the spindle system to establish dynamic mathematical model of thermal characteristics in machine tool spindle system. the model is derived form physical law of heat transfer and thermoelasticity and represents the thermal behavior induced by uneven thermal expansions whitin a bearing. The model, which is sucessfully validated for two typical configurations of high speed spindle assembles, provides a tool for understanding the basis mechanics of induced thermal expansion as a function of initial preload, spindle speed and housing cooling conditions.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권1호
• /
• pp.38-42
• /
• 2004

In this paper we analyzed the electromagnetic behavior of a superconducting fault current limiter (SFCL) under the quench state using FEM. The analysis model used in this work is 5.5 KVA meander-line type SFCLs which are currently developed by Superconductor Power System Lab in Korea Electric Power Research Institute. Meshes of 3,650 triangular elements were used in the analysis of this SFCL. Analysis results showed that the distribution of current density was concentrated to inner curved line in meander-line type SFCL and the maximum current density was 14.61 A/$m^2$ and also the maximum Joule heat was 2,030 W/$m^2$ in this region. We think that the new and the modified structure must be considered for an uniform distribution of the electromagnetic field.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.847-850
• /
• 2008

Three thermally stable red dyes of azo, quinacridone and perylene derivatives were synthesized and dye-based color filters were manufactured for liquid crystal display. Aggregation behavior of the dyes and their spectral property in film state were investigated by concentration dependent spectroscopy and field emission scanning electron microscopy (FE-SEM). These dyes have remarkable difference on their aggregation behavior in film state. Such difference of aggregation behavior affects the spectral property of the film, and it can cause decreasing the transmittance of dye-based color filters.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.201-208
• /
• 2000

In this study, the behavior of saturated sandy soils under dynamic loads - pore water pressure and effective stress - was investigated using Disturbed State Concept(DSC) model. The model parameters are evaluated from laboratory test data. During the process of loading and reverse loading, DSC model is utilized to trace strain-hardening and cyclic softening behavior. The procedure of back prediction proposed in this study are verified by comparing with laboratory test results. From the back prediction of pore water pressure and effective mean pressure under cyclic loading, excess pore water pressure increases up to initial effective confining pressure and effective mean pressure decrease close to zero in good greement with laboratory test results. Those results represent the liquefaction of saturated sandy soils under dynamic loads. The number of cycles at initial liquefaction using the model prediction is in good agreement with laboratory test results. Therefore, the results of this study state that the liquefaction of saturated sandy soils can be explained by the effective tress analysis.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1006-1007
• /
• 2006

The oil-impregnated sintered bearings are used for various aplecations and, wide usages without refueling. The oil circulating mechanism operates smoothly the behavior of oil If doing at the time of passing and becoming a stationary state, and there is little thing where trouble is caused. On the other hand, the trouble of such as starting noise might be caused in the unstationary state that repeats operation for a short time. To study the behavior of oil of each parameter, we execute the numerical simulation and various verification experiments. As a result, we developed that the bearings were able to be used enough for various brief operating time in the unstationary state. Finally we have expanded the usage of the oil-impregnated sintered bearings by adding the consideration of the behavior of oil.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1373-1383
• /
• 2018

Experimental study was conducted to investigate the seismic behavior of roof joint. Eight full-scale specimens were tested considering the effects of axial force, joint height, hole shape of base plate and edge distance of concrete on the failure mode and resistance capacity of roof joint. With the increase of axial force, the hysteretic curves were fuller. The mechanical model of roof joint change from bending to shear. With the increase of joint height, the ultimate strength of roof joint decreased. If the hole shape of base plate changed from circle to loose, the slip behavior of roof joint appeared and the ultimate strength of roof joint decreased. The damage of edge concrete may occur if the edge distance of concrete was not big enough.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2002년도 추계정기학술대회
• /
• pp.445-453
• /
• 2002

Past and current customer behavior is the best predicator of future customer behavior. This paper introduces a procedure on personalized defection detection and prevention for an online game site. The basic idea for our defection detection and prevention is adopted from the observation that potential defectors have a tendency to take a couple of months or weeks to gradually change their behavior (i.e. trim-out their usage volume) before their eventual withdrawal. For this purpose, we suggest a SOM (Self-Organizing Map) based procedure to determine the possible states of customer behavior from past behavior data. Based on this representation of the state of behavior, potential defectors are detected by comparing their monitored trajectories of behavior states with frequent and confident trajectories of past defectors. The key feature of this study includes a defection prevention procedure which recommends the desirable behavior state for the ext period so as to lower the likelihood of defection. The defection prevention procedure can be used to design a marketing campaign on an individual basis because it provides desirable behavior patterns for the next period. The experiments demonstrate that our approach is effective for defection prevention and efficient for defection detection because it predicts potential defectors without deterioration of prediction accuracy compared to that of the MLP (Multi-Layer Perceptron) neural network.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.119-124
• /
• 2003

In this study, retardation behavior of fatigue crack under single overloading of the mixed mode I+II state was experimentally investigated. To produce single overload in the mixed mode I+II state, the compact tension shear (CTS) specimen and loading device were used. The propagation tests for fatigue crack were performed under mode I loading overloading afterwards. We examined the observed deformation aspects, variation of fatigue life and crack propagation rate, and the aspects of retardation behavior from tests. The retardation effect of mixed-mode single overload on fatigue crack propagation behavior was smaller than that of mode I single overload. It has been confirmed that the retardation behavior did not immediately appear and the retardation length was short when the component of mixed-mode overload was changed.