• 기술발표회
• /
• 통권2006호
• /
• pp.86-100
• /
• 2006

The single drilled shaft foundation has been used in the other countries, but has not used in South Korea at all This foundation is very effective and economic method in South Korea which is easy to meet a good rock mass within 50m depth from the ground We have many experiences to construct 1.52 5m drilled shaft foundations and ability to construct 30m drilled shaft foundation without special efforts The soil behavior is nonlinear, but it can be proposed in linear in practical purpose on bridges. The elastic modulus of soil can be rationally obtained by the method of Road Bridge Design Manual in South Korea using the Schmertmann(1970)'s proposal, and the elastic modulus of rock can be obtained by the field test. In seismic design the column and drilled shaft must be restricted to the elastic design because the behavior of this foundation is flexible and the arrangement of the rebars makes the various defect In this paper the design criteria is compared with FHWA design criteria, and the design criteria is proposed in consistent with Road Bridge Design Manual in South Korea. The single drilled shaft foundation of a test bridge was constructed in the Iksan-Jangsoo highway, and we checked its stability, workability and economy

• 한국지반신소재학회논문집
• /
• 제9권1호
• /
• pp.47-57
• /
• 2010

기초 지반이나 댐, 사면 등을 건설할 경우, 성토재로 입자 크기가 큰 조립 재료를 많이 사용하고 있다. 따라서 이러한 조립재료의 전단 거동은 구조물의 안정성에 영향을 미치게 된다. 예를 들어, 구조물과 입자의 접촉면 혹은 입자들간의 접촉면에서 발생하는 입자 파쇄는 전체 지반의 특성을 변화시키고 따라서 구조물의 안정성에 문제를 유발할 수 있다. 본 연구에서는 입자의 파쇄 유무에 따른 전단 거동의 특성을 파악하기 위해 개별요소법(DEM, Distinct Element Model)을 기반으로 하는 수치해석 프로그램 PFC2D를 이용하여 직접전단실험을 재현하였다. 입자의 모델을 파쇄 모델과 비 파쇄 모델로 구분하여 총 4개의 모델을 모사하고 그 결과를 분석하였다. 비 파쇄 모델에는 one ball 모델과 clump 모델이, 파쇄 모델에는 cluster 모델과 Lobo-crushing 모델을 적용하였다. 입자의 구성은 Lobo-Guerrero and Vallejo(2005)가 제안한 8개 입자의 조합으로 구성하였다. 해석 결과, 내부마찰각 순서는 clump 모델 > cluster 모델 > one ball 모델 순이며, 전체를 비교해 봤을 때 원형입자모델보다 입자 결합모델이, 파쇄 모델보다 비 파쇄 모델의 내부마찰각이 크게 나타났다. 또한 기존에 제시된 Lobo-Guerrero and Vallejo(2005)의 모델은 입자 파쇄 거동을 모사하기에는 부적합하다는 결론을 얻을 수 있었다.

• Earthquakes and Structures
• /
• 제18권1호
• /
• pp.1-14
• /
• 2020

The vehicle-bridge interaction (VBI) analysis might be cumbersome and computationally expensive in bridge engineering due to the necessity of solving large number of coupled system of equations. However, VBI analysis can provide valuable insights into the dynamic behavior of highway bridges under specific loading conditions. Hence, this paper presents a numerical study on the dynamic behavior of a conventional highway bridge under strong near-field and far-field earthquake motions considering the VBI effects. A recursive substructuring method, which enables solving bridge and vehicle equations of motion separately and suitable to be adapted to general purpose finite element softwares, was used. A thorough analysis that provides valuable information about the effect of various traffic conditions, vehicle velocity, road roughness and effect of soil conditions under far-field and near-field strong earthquake motions has been presented. A real-life concrete highway bridge was chosen for numerical demonstrations. In addition, sprung mass models of vehicles consist of conventional truck and car models were created using physical and dynamic properties adopted from literature. Various scenarios, of which the results may help to highlight the different aspects of the dynamic response of concrete highway bridges under strong earthquakes, have been considered.

• 한국지반공학회지:지반
• /
• 제12권4호
• /
• pp.75-86
• /
• 1996

현재 옹벽해석에 사용되는 Rankine이나 Coulomb의 토압산정방법은 벽체 뒤의 토사가 파괴상태에 도달하였다는 가정조건에 근거하고 있으며, 이를 위해서는 충분한 횡방향 변위가 발생하여야 한다. 최근의 현장시험 등을 통한 많은 연구에서는 옹벽에 작용하는 수평주동토압이 Rankine이나 Coulomb의 토압보다 크게 나타나고 있음을 보여주고 있으며, 이는 발생 수평변위량과 밀접한 관계가 있는 것으로 판단된다. 본 연구에서는 Drucker Prayer의 지반구성모델을 이용한 유한요소해석을 통하여 캔틸레버식 옹벽의 벽체 지주와 가상배면에 작용하는 수평주동토압을 발생변위와 함께 분석하였으며, 아울러 경사진 뒤채움이 수평주동토압에 미치는 영향도 검토하였다. 그 결과 옹벽에 작용하는 수평주동 토압은 발생변위와 밀접한 관계가 있으며, Rankine과 Coulomb의 방법은 작용수평주동토압을 과소평가하고, 경사진 뒤채움의 수평주동토압증가효과도 과소평가함을 확인하였다. 그리고 본 해석결과를 토대로 수평주동토압을 간편하게 산출할 수 있는 새로운 방법을 제안하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.808-812
• /
• 2010

A great deal of attention is focused on coupled Thermo-Hydro-Mechanical (THM) behavior of multiphase porous media in diverse geo-mechanical and geo-environmental areas. This paper presents general governing equations for coupled THM processes in unsaturated porous media. Coupled partial differential equations are derived from 3 mass balances equations (solid, water, and air), energy balance equation, and force equilibrium equation. Finite element code is developed from the Galerkin formulation and time integration of these governing equations for 4 main variables (displacement $\underline{u}$, gas pressure $P_g$, liquid pressure $P_l$), and temperature T). The code is validated with theoretical solutions for linear material with simple boundary conditions.

• 한국전산구조공학회논문집
• /
• 제33권2호
• /
• pp.121-128
• /
• 2020

본 논문에서는 고속열차-차륜-레일-지반부의 상호작용에 따른 지반부의 변위장과 가속도장의 분포양상을 연구하고자 하였다. 이를 위해 고속열차 주행을 실제 차륜으로 모형하여 차륜-레일간의 연직접촉과 사행동에 의한 횡접촉을 모사하고, 이동질량해석을 근간으로 하였다. 이 때 지반부는 Modified Drucker-Prager 모델을 이용하여 상면 지반부의 비선형 거동을 부여하고 이에 따른 변위, 가속도의 변화를 탄성지반의 거동과 비탄성지반의 거동을 상호 비교하였다. 이를 통해, 실제 지반거동과 가까운 변위와 가속도 범위를 예측하고자 하였다. 이 때 지반부의 von-Mises응력과 등가소성변형도를 검토하고, 각 파괴면에서의 등가소성변형도, 전체 체적변형도 등을 검토하였다. 이동질량을 이용한 차륜-레일 접촉부의 수직응력, 횡압, 종방향 구속압 등의 시간이력에 따른 응력변화도 검토하였다. 비선형 지반모델의 경우 탄성 지반모델에 비해 열차 주행에 따른 변위 차이는 크지 않는 반면에 가속도의 경우는 큰 감소를 발생시키는 것으로 나타났다.

• Computers and Concrete
• /
• 제20권2호
• /
• pp.145-154
• /
• 2017

In geological engineering, grouting with Portland cement is a common technique for ground improvement, during which micro-fine cement is applied as a slurry, such that it intrudes into soil voids and decreases soil porosity. To determine the utility and behavior of cements with different Blaine values (index of cement particle fineness) for stabilization of fine sand, non-destructive and destructive tests were employed, such as laser-ray determination of grain size distribution, and sedimentation, permeability, and compressive strength tests. The results of the experimental study demonstrated a suitable mix design for the upper and lower regions of the cement-grading curve that are important for grouting and stabilization. Increasing the fineness of the cement decreased the permeability and increased the compressive strength of grouted sand samples considerably after two weeks. Moreover, relative to finer (higher Blaine value) or coarser (lower Blaine value) cements, cement with a Blaine value of $5,100cm^2/g$ was optimal for void reduction in a grouted soil mass. Overall, study results indicate that cement with an optimum Blaine value can be used to satisfy the designed geotechnical criteria.

• 한국물환경학회지
• /
• 제24권5호
• /
• pp.523-532
• /
• 2008

A phase II site investigation and feasibility study was conducted at a military mortar shooting range near the demilitarized zone (Kyunggi, South Korea) to assess the extent of contaminants migration to the nearby Imjin river in which a flood control dam is under construction. The results showed that silty-clay soils around target areas were co-contaminated with heavy metals (Cd, Cu, and Pb) and explosives (HMX, RDX, and TNT). The total amount of contaminant was estimated to be 497.1 kg-RDX, 20.6 kg-HMX, 1.4 kg-TNT, 35.2 kg-Cd, 4,331 kg-Cu, and 5,115 kg-Pb, respectively. Both heavy metals and explosives were almost equally distributed on each soil particle size fraction. Neither subsurface soil samples nor ground water samples showed signs of contamination above the environmental criteria. The major migration route of contaminants was soil particles in surface run-off during rain at which a mass discharge rate of 30.0 mg-RDX/hour was observed.

• 한국지반공학회논문집
• /
• 제32권3호
• /
• pp.49-60
• /
• 2016

일반적으로 흙의 파괴는 전단 변형이 집중되는 영역인 전단면의 형성과 발달에 의해 발생한다. 정규압밀 점성토의 파괴거동을 확인하기 위해 시료 내부의 변형거동 분포에 대해 평가가 필요하다. 본 연구에선 재성형된 카올리나이트 시료에 대해 평면변형률 시험을 수행하였으며, 전단 과정에서 일정 변형률 간격에서 디지털 이미지 해석을 수행하였다. 시험 결과로 도출된 응력-변형률 결과를 통해 4개의 단계를 결정하여 시료의 변형거동과 전단면 특성을 평가하였다.

• Structural Engineering and Mechanics
• /
• 제73권5호
• /
• pp.599-612
• /
• 2020

A combination of a gravity wall and an anchor beam is widely used to support the high soil deposit on rock mass. In this study, two groups of shaking table test were performed to investigate the responses of such combined retaining structure, where the rock masses were shaped with a flat surface and a curved surface, respectively. Meanwhile, the dynamic numerical analysis was carried out for a comparison or an extensive study. The results were studied and compared between the combined retaining structures with different shaped rock masses with regard to the acceleration response, the earth pressure response, and the axial anchor force. The acceleration response is not significantly influenced by the surface shape of rock mass. The earth pressure response on the combined retaining structure with a flat rock surface is more intensive than the one with a curved rock surface. The anchor force is significantly enlarged by seismic excitation with a main earthquake-induced increment at the first intensive pulse of Wenchuan motion. The value of anchor force in the combined retaining structure with a flat rock surface is generally larger than the one with a curved rock surface. Generally, the combined retaining structure with a curved rock surface presents a better seismic performance.