• Title/Summary/Keyword: Behavior detection

Search Result 932, Processing Time 0.028 seconds

Determination of radiolysis products in Tri-Octyl Amine by high performance liquid chromatography-mass spectrometer (HPLC-MS에 의한 Tri-Octyl Amine(TOA)의 방사선 분해산물 정량)

  • Yang, Han-Beom;Lee, Eil-Hee;Moon, Hyung-Sil
    • Analytical Science and Technology
    • /
    • v.18 no.3
    • /
    • pp.201-205
    • /
    • 2005
  • Tri-octyl amine (TOA) is used in solvent extraction process for radioactive waste. This compound may be degraded to di-octyl amine (DOA), mono-octyl amine (MOA) by radioactive materials. Amount of TOA, DOA and MOA in TOA must be monitored because they production of these compounds means degradation of which leads to a decrease in the extraction yield. Retention behavior for TOA, DOA and MOA are studied with Phenomenex LUNA-$C_{18}$ ($4.6mm{\times}25cm$) analytical column and $CH_3OH:H_2O$ (50 mmol $CH_3COONH_4$) eluent by liquid chromatography. Optimum condition for these compounds is $CH_3OH:H_2O$ (50 mmol $CH_3COONH_4$) = 85 : 15 ratio. TOA, DOA and MOA compounds is well separated within 20 minute. Dynamic range is $30{\sim}160{\mu}g/mL$ for TOA, $5{\sim}100{\mu}g/mL$ for DOA and $0.1{\sim}5{\mu}g/mL$ for MOA, respectively. The detection limit are $0.1{\mu}g/mL$ for TOA, $1{\mu}g/mL$ for DOA (in SCAN mode) and $0.1{\mu}g/mL$ for MOA (in SIM mode) in this system with $20{\mu}L$ sample loop.

Changes of Vaginal Epithelial Cells in Korea Jin-do Bitches after Induction of Estrus with PMSG and hOG (PMSG와 hCG 병용투여에 의해 인공발정 유기된 진도개에서 질상피세포 변화상)

  • 이주환;김나리;박인철;오기석;김세라;박상국;문진산;배춘식;김성호
    • Journal of Veterinary Clinics
    • /
    • v.19 no.4
    • /
    • pp.418-425
    • /
    • 2002
  • Estrus was induced in 13 anestrus Korea Jin-do bitches by intramuscular injection of pregnant mare serum gonadotropin (PMSG) in a dose of 500 lU once daily for ten consecutive days, followed by an additional single intraveneous injection of 1,000 lU of human chorionic gonadotropin (hCG) on the tenth day. Day-changes of vaginal epithelial cells during the hormone treatment were investigated in each experimental bitches and compared with the those of spontaneous estrus bitches. The first days of vulval bleeding and male acceptance after PMSG treatment were on Day 6.0$\pm$ 1.5 (mean$\pm$ SD) and Day 9.0$\pm$ 1.9, respectively. And in all of 13 bitches, vulval swelling and perineal reflex were shown. The mean durations of proestrus and estrus were 2.9$\pm$ 1.4 (mean$\pm$ SD, range ; 1-6) and 11.5: 1.7 (range ; 8-14) days, respectively, that is, duration of proestrus was significantly shorter than that of the spontneous estrous bitches but duration of estrus was longer than that of the spontaneous estrous bitches. Characteristic features of vaginal cytology during the estrous cycle were the high proportions of large intermediate cell, superficial cell, anuclear cell and erythrocyte in proestrus, superficial cell and anuclear cell in estrus and parabasal cell, small intermediate, large intermediate cell, and leukocyte in diestrus, respectively. The comification index (Cl) was significantly high proportion in proestrus and estrus, when Day 0 was timed from the first day of male acceptance, the Cl was first increased above 80% on Day 0 and maintained above 80% until Day 0 to Day 5 during 6 days and showed a peak on Day 2. Also it was maintained above 90% until Day 2 to Day 3 during 2 days. These results indicated that all 13 ekperimental bitches showed positive estrus detection by the estrus behavior and vaginal smear test after treated with PMSG and hCC. It suggested that vaginal cytology was used to estimate the optimal mating and ovulation time, in consideration of the day when the Cl was maintained above 80% in estrus-induced Korea Jin-do bitches.

Visual Feedback System for Manipulating Objects Using Hand Motions in Virtual Reality Environment (가상 환경에서의 손동작을 사용한 물체 조작에 대한 시각적 피드백 시스템)

  • Seo, Woong;Kwon, Sangmo;Ihm, Insung
    • Journal of the Korea Computer Graphics Society
    • /
    • v.26 no.3
    • /
    • pp.9-19
    • /
    • 2020
  • With the recent development of various kinds of virtual reality devices, there has been an active research effort to increase the sense of reality by recognizing the physical behavior of users rather than by classical user input methods. Among such devices, the Leap Motion controller recognizes the user's hand gestures and can realistically trace the user's hand in a virtual reality environment. However, manipulating an object in virtual reality using a recognized user's hand often causes the hand to pass through the object, which should not occur in the real world. This study presents a way to build a visual feedback system for enhancing the user's sense of interaction between hands and objects in virtual reality. In virtual reality, the user's hands are examined precisely by using a ray tracing method to see if the virtual object collides with the user's hand, and when any collision occurs, visual feedback is given through the process of reconstructing the user's hand by moving the position of the end of the user's fingers that enter the object through sign distance field and reverse mechanics. This enables realistic interaction in virtual reality in real time.

A Study on the Thermo-Mechanical Fatigue Loading for Time Reduction in Fabricating an Artificial Cracked Specimen (열-기계적 피로하중을 받는 균열시편 제작시간 단축에 관한 연구)

  • Lee, Gyu-Beom;Choi, Joo-Ho;An, Dae-Hwan;Lee, Bo-Young
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.21 no.1
    • /
    • pp.35-42
    • /
    • 2008
  • In the nuclear power plant, early detection of fatigue crack by non-destructive test (NDT) equipment due to the thermal cyclic load is very important in terms of strict safety regulation. To this end, many efforts are exerted to the fabrication of artificial cracked specimen for practicing engineers in the NDT company. The crack of this kind, however, cannot be made by conventional machining, but should be made under thermal cyclic load that is close to the in-situ condition, which takes tremendous time due to the repetition. In this study, thermal loading condition is investigated to minimize the time for fabricating the cracked specimen using simulation technique which predicts the crack initiation and propagation behavior. Simulation and experiment are conducted under an initial assumed condition for validation purpose. A number of simulations are conducted next under a variety of heating and cooling conditions, from which the best solution to achieve minimum time for crack with wanted size is found. In the simulation, general purpose software ANSYS is used for the stress analysis, MATLAB is used to compute crack initiation life, and ZENCRACK, which is special purpose software for crack growth prediction, is used to compute crack propagation life. As a result of the study, the time for the crack to reach the size of 1mm is predicted from the 418 hours at the initial condition to the 319 hours at the optimum condition, which is about 24% reduction.

LATEST RESULTS OF THE MAXI MISSION

  • MIHARA, TATEHIRO
    • Publications of The Korean Astronomical Society
    • /
    • v.30 no.2
    • /
    • pp.559-563
    • /
    • 2015
  • Monitor of All-sky X-ray Image (MAXI) is a Japanese X-ray all-sky surveyer mounted on the International Space Station (ISS). It has been scanning the whole sky since 2009 during every 92-minute ISS rotation. X-ray transients are quickly found by the real-time nova-search program. As a result, MAXI has issued 133 Astronomer's Telegrams and 44 Gamma-ray burst Coordinated Networks so far. MAXI has discovered six new black holes (BH) in 4.5 years. Long-term behaviors of the MAXI BHs can be classified into two types by their outbursts; a fast-rise exponential-decay type and a fast-rise flat-top one. The slit camera is suitable for accumulating data over a long time. MAXI issued a 37-month catalog containing 500 sources above a ~0.6 mCrab detection limit at 4-10 keV in the region ${\mid}{b}{\mid}$ > $10^{\circ}$. The SSC instrument utilizing an X-ray CCD has detected diffuse soft X-rays extending over a large solid angle, such as the Cygnus super bubble. MAXI/SSC has also detcted a Ne emission line from the rapid soft X-ray nova MAXI J0158-744. The overall shapes of outbursts in Be X-ray binaries (BeXRB) are precisely observed with MAXI/GSC. BeXRB have two kinds of outbursts, a normal outburst and a giant one. The peak dates of the subsequent giant outbursts of A0535+26 repeated with a different period than the orbital one. The Be stellar disk is considered to either have a precession motion or a distorted shape. The long-term behaviors of low-mass X-ray binaries (LMXB) containing weakly magnetized neutron stars are investigated. Transient LMXBs (Aql X-1 and 4U 1608-52) repeated outbursts every 200-1000 days, which is understood by the limit-cycle of hydrogen ionization states in the outer accretion disk. A third state (very dim state) in Aql X-1 and 4U 1608-52 was interpreted as the propeller effect in the unified picture of LMXB. Cir X-1 is a peculiar source in the sense that its long-term behavior is not like typical LMXBs. The luminosity sometimes decreases suddenly at periastron. It might be explained by the stripping of the outer accretion disk by a clumpy stellar wind. MAXI observed 64 large flares from 22 active stars (RS CVns, dMe stars, Argol types, young stellar objects) over 4 years. The total energies are $10^{34}-10^{36}$ erg $s^{-1}$. Since MAXI can measure the spectrum (temperature and emission measure), we can estimate the size of the plasma and the magnetic fields. The size sometimes exceeds the size of the star. The magnetic field is in the range of 10-100 gauss, which is a typical value for solar flares.

The Application of Octa-Substituted Metallophthalocyanine Langmuir-Blodgett films for $NO_2$ Measurement (수정진동자를 이용한 프탈로시아닌 LB박막의 $NO_2$ 감지 특성)

  • Kwon, H.J.;Lee, Y.J.;Chang, Y.K.;Kim, J.D.
    • Journal of Sensor Science and Technology
    • /
    • v.7 no.4
    • /
    • pp.254-262
    • /
    • 1998
  • Multilayer Langmuir-Blodgett (LB) films coated on quartz crystal microbalance (QCM) of octa-substituted metallophhtalocyanines ($MPc(OEH)_8$, M = Cu, Co, and Sn) and dihydrogen phthalocyanines ($H_2Pc(OEH)_8$) were used to quantify $NO_2$ concentrations. They were exposed to various concentrations of $NO_2$ in dry $N_2$. Among the four phthalocyanines we tested, the metal-free $H_2Pc(OEH)_8$ was observed to be most sensitive to $NO_2$. However, its LB film showed a partially irreversible behavior, that is part of the frequency change due to $NO_2$ adsorption could not be recovered even after purging with pure $N_2$ gas for an extended period. Examining the spectra of NMR and FTIR revealed fact that the irreversible portion of frequency change was due to ether groups in the linkage between side chains and the Pc unit. In order to remove the effect of such initial deactivation, on $NO_2$ quantification experiment, a freshly fabricated LB film was treated at a high concentration of $NO_2$ so that the ether sites were saturated. A pretreated LB film showed a reproducible performance for repeated uses. The $CuPc(OEH)_8$ LB film showed a satisfactory sensing performance down to as low as 4 ppm. For the $H_2Pc(OEH)_8$ LB film, the lower detection limit was found to be 35ppb of $NO_2$. In order to make the experimental condition more realistic, the carrier gas, dry nitrogen, was replaced by air. It was observed that the presence of oxygen, a weak electron acceptor, reduced the sensitivity and thus increased the sensing limit to hundreds of ppb. Results of experiments with moisture added showed that the interference of moisture was quite severe.

  • PDF

$^{13}C$ NMR Analysis for the Characterization of Heme Electronic/Molecular Structure in Horse Myoglobin Cyanide (Myoglobin 시안 단백질에 포함된 Heme에 대한 전자 및 분자구조 규명을 위한 $^{13}C$ NMR분석)

  • Lee, Kang-Bong;Kweon, Jee-Hye;Lee, Ho-Jin;Kim, Young-Man;Choi, Young-Sang
    • Analytical Science and Technology
    • /
    • v.11 no.1
    • /
    • pp.73-78
    • /
    • 1998
  • The reverse detection heteronuclear multiple quantum coherence, HMQC study of metcyano complex of horse myoglobin(MbCN) has provided the complete assignment of hyperfine shifted resonances of heme carbons attached with proton(s). The application of HMQC experiment to the paramagnetic low-spin MbCN gives clear $^1H$ and $^{13}C$ coherences for the paramagnetic amino acid residues as well as heme side chains, and can be extended to the low-spin paramagnetic hemoprotein derivative for the assignment of natural abundance $^{13}C$ resonances. This assignment strategy can avoid possible ambiguities that may result from the sole utilization of $^1H$ nuclear Overhauser effect for the assignment of heme $^1H$ signals resonating in the diamagnetic region. The resulting 2,4-vinyl ${\alpha}$-carbons and 7-propionate ${\beta}$-carbon follow anomalous anti-Curie behavior, and are indicative of incoplanarity with heme plane. Magnetic/electronic asymmetry of heme induced by proximal histidine(His) makes spread that the hyperfine shifted heme carbon resonances over the range of 250 ppm at $25^{\circ}C$. These heme carbon resonances would be the much more sensitive probe than those of proton resonances in analyzing the nature of heme electronic structure of myoglobin.

  • PDF

A Study on Sick Role Behavior of Some Hypertensive Workers (일부 근로자들의 고혈압치료형태에 관한 연구)

  • Lee, Eun-Il;Kim, Soon-Duck;Cha, Chul-Whan
    • Journal of Preventive Medicine and Public Health
    • /
    • v.19 no.2 s.20
    • /
    • pp.203-212
    • /
    • 1986
  • Hypertension is one of the most well known risk factors for cerebrovascular or coronary heart disease and is a major public health problem. Early detection and treatment of hypertension are essential, but the compliance of treatment on hypertension is not easy to achive. Hypertensive workers are being detected by the annual screening under the Labour Standard Law in Korea but the solidified control system for them is not existing. This study about workers 'Motive-Belief-Action in non-drug and drug treatment of their hypertension would be worthwhile to interpret how the workers actually behave in coping with hypertension, and also would be advisable to construct the follow-up program in Korea. In the field research process two criteria were used to select sample group. The first criterion included the workers who were screened to be hypertensive with their blood pressure above 160/95 in this survey. The second one was used to classify study-group respondents who had known their hypertension by successive annual screening. From such criteria a total of 156 male workers were sampled in 21 industries, the author interviewed them using the structured questionnaire which consisted of Belief-Motive-Action items about non-drug and drug treatment for hypertension with open-ended question on symptom of hypertension. The summary is as follows: 1) Sixty-one percent of respondents had ever checked their blood pressure somewhere besides the annual screening. 2) Most respondents(97.2%) complained no symptoms of hypertension at all. 3) Belief level of non-drug treatment was relatively high (82.1%-64.7%), but motive(55.1%-28.2%) and action(38.5%-16.7%) levels were low. 4) Belief level of drug treatment was relatively lower than that of non-drug treatment, blue collar workers showed higher artier level of drug treatment than white collar workers, and correlation coefficient between belief and motive on drug treatment was lower in group of not-recognizing their family history of hypertension than recognized group. Such findings indicated that belief on drug treatment of hypertensive workers would be problematic. 5) White collar workers showed significant lower correlation coefficients between Motive and Action of salt restriction, restriction of fatty diet and relaxation than blue collar workers. 6) Mild hypertension group showed low levels of Motive and Action of non-drug treatment(salt restriction, restriction of fatty diet and relaxation) and also showed low correlation coefficient between Belief and Motive of above non-drug treatment.

  • PDF

Supplementation of the Indoor Location Tracking Techniques Based-on Load-Cells Mechanism (로드셀 기반의 실내 위치추적 보완 기법)

  • YI, Nam-Su;Moon, Seung-Jin
    • Journal of Internet Computing and Services
    • /
    • v.17 no.6
    • /
    • pp.1-8
    • /
    • 2016
  • Current indoor intrusion detection and location tracking methods have the weakness in seamless operations in tracking the objective because the object must possess a communicating device and the limitation of the single cell size (approximate $100cm{\times}100cm$) exits. Also, the utilization of CCTV technologies show the shortcomings in tracking when the object disappear the area where the CCTV is not installed or illumination is not enough for capturing the scene (e.g. where the context-awarded system is not installed or low illumination presents). Therefore, in this paper we present an improved in-door tracking system based on sensor networks. Such system is built on a simulated scenario and enables us to detect and extend the area of surveillance as well as actively responding the emergency situation. Through simulated studies, we have demonstrated that the proposed system is capable of supplementing the shortcomings of signal cutting, and of estimating the location of the moving object. We expect the study will improve the better analysis of the intruder behavior, the more effective prevention and flexible response to various emergency situations.

Characteristics of OCP of Reinforced Concrete Using Socket-type Electrodes during Periodic Salt Damage Test (주기적 염해 시험에 따른 소켓 타입 전극을 활용한 철근 콘크리트의 OCP 특성)

  • Lee, Sang-Seok;Kwon, Seung-Jun
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.25 no.4
    • /
    • pp.28-36
    • /
    • 2021
  • It is known that buried rebars inside concrete structures are protected from corrosion due to passive layer. It is very important to delay the timing of corrosion or evaluate a detection of corrosion initiation for the purpose of cost-beneficiary service life of a structure. In this study, corrosion monitoring was performed on concrete specimens considering 3 levels of cover depth(60 mm, 45 mm, and 30 mm), W/C(water to cement) ratio(40.0%, 50.0%, and 60.0%) and chloride concentration(0.0%, 3.5%, and 7.0%). OCP(Open Circuit Potential) was measured using agar-based socket type sensors. The OCP measurement showed the consistent behavior where the potential was reduced in wet conditions and it was partially recovered in dry conditions. In the case of 30 mm of cover depth for most W/C ratio cases, the lowest OCP value was measured and rapid OCP recovery was evaluated in increasing cover depth from 30 mm to 45 mm, since cover depth was an effective protection against chloride ion ingress. As the chloride concentration increased, the effect on the cover depth tended to be more dominant than the that of W/C ratio. After additional monitoring and physical evaluation of chloride concentration after specimen dismantling, the proposed system can be improved with increasing reliability of the corrosion monitoring.