• 제목/요약/키워드: Behavior Manual

검색결과 153건 처리시간 0.032초

케이블넷을 이용한 파사드 시스템의 시공관리를 위한 기초연구 (Priliminary Study on the Construction Management of Facade System Using Cable-net)

  • 문상덕;옥종호
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 춘계 학술논문 발표대회
    • /
    • pp.189-191
    • /
    • 2013
  • Analysis of cable net facade by examing the literature and technical manual for it's characteristics, types, elements of construction management. And it will be performed research on the construction quality management such as development of guidelines and specification, analysis of the structural behavior.

  • PDF

오르막 경사구간에서 중차량 속도감소를 고려한 아스팔트 포장구조체 내부거동 분석 (Estimation of Asphalt Pavement Internal Behavior under Decreasing Truck Speed on Uphill Lanes)

  • 서주원
    • 한국도로학회논문집
    • /
    • 제16권2호
    • /
    • pp.53-59
    • /
    • 2014
  • PURPOSES : This study estimated an asphalt pavement internal behavior under uphill lanes considering reducing speed of heavy truck on uphill slope. METHODS : Truck performance curve which has been adapted to "Korea Highway Capacity Manual" was analyzed. And asphalt pavement internal behaviors were estimated with Multi-layered elastic analysis using KPRP(Korea Pavement Research Program) dynamic modulus prediction equations. RESULTS : As a result, it is shown that when the standard truck drives 2.0 km at a speed of 80 km/h in 8% climbing slope, it's speed reduced to 25.4 km/h, at same time frequency in asphalt layer decrease to 67.2% and it's dynamic modulus degrades to 30.9%. Based on these results, internal behavior as decreasing vehicle speed on uphill lanes were estimated. CONCLUSIONS : From the results of Multi-layered elastic analysis, internal behavior showed that when the standard truck drives 2.0 km at a speed of 80 km/h in 8% slope on uphill lanes, vertical strain was increased to 44.4% at the bottom of surface course, and lateral tensile strain was increased to 20.5% at the bottom of base course.

그룹 감각통합치료가 발달장애 아동의 운동기능 및 사회성 증진에 미치는 영향 (The Effect of Group Sensory Integration Therapy on Motor Skill and Social Function of Children With Developmental Disorder)

  • 한미애;장기연;김지연;한수연
    • 대한감각통합치료학회지
    • /
    • 제7권2호
    • /
    • pp.23-35
    • /
    • 2009
  • 목적: 본 연구의 목적은 발달장애 아동에게 그룹 감각통합치료를 적용하여 아동의 운동기능 및 사회성 증진에 어떠한 영향을 미치는지 알아보고자 한다. 연구방법: 대전 S 아동연구소 감각통합치료실을 이용하는 아동 중, 발달장애 및 정신지체로 진단받은 아동 10명을 대상으로 하였다. 실험군은 그룹 감각통합치료에 참여하는 아동 5명, 대조군은 개별 감각 통합치료에 참여하는 아동 5명으로 주 1회 90분, 20주 동안 적용하였다. 아동의 운동기능 및 사회성 증진 정도를 측정하기 위한 사전 사후 검사로 운동적합성 검사(Bruininks-Oseretsky test of Motor Proficiency 2), 한국판 적응행동검사(Korean-Scales of Independent Behavior-Revised) 그리고 사회성숙도 검사(Social Maturity Scale)를 사용하였다. 결과: 그룹 감각통합치료 적용 전 후 실험군 대부분의 아동이 손/상지협응(Manual coordination)과 신체협응(Body coordination), 사회성 전반적 영역에서 기능향상을 보였지만, 통계적으로 유의미하지 않았다. 그러나 그룹 감각통합치료 프로그램 전 후 운동기능 및 사회성 향상의 차이는 실험군 아동이 대조군 아동보다 더 크게 나타났으며, 특히 손/상지협응(Manual coordination), 손기민성(Manual dexterity) 하위항목, 사회성숙도 검사의 사회연령, 사회지수에서 통계적으로 유의미하게 나타났다. 결론: 본 연구결과를 통하여 그룹 감각통합치료 프로그램이 발달장애 아동의 운동기능 및 사회성 기능증진에 효과가 있음을 알 수 있었다. 추후 보다 다양한 장애 유형의 아동을 대상으로 그룹 감각통합치료 프로그램을 적용하여 그 효과를 증명하는 연구가 진행되어야 할 것이다.

  • PDF

신호교차로에서의 차선별 이용률의 산정 모형 (Variation of Lane Utlization at Urban Signalized Intersections)

  • 오영태;심대영
    • 대한교통학회지
    • /
    • 제12권1호
    • /
    • pp.117-132
    • /
    • 1994
  • Drivers select approach lane according to various traffic situations as well as their destination. This behavior affects the utilization of lanes and capacity analysis at urban signalized intersections. This paper presents the concept, behavior of lane utilization, and the lane utilization factors which included in the study. Preparation of Korean Highway Capacity Manual (1992). Lane utilization is affected by various traffic and geometric factors which are roadway side friction, median friction, and number of lanes, etc. and it converges to an equal utilization as the degree of saturation (V/C ratio) increase. Lane utilization factor is suggested by the degree of saturation and the number of lanes, and it is presented in this paper.

  • PDF

기계적 및 열적 물성을 고려한 클러치 압력판의 거동해석 (Analysis of Pressure Plate Behavior of a Clutch Including Thermal and Mechanical Material Properties)

  • 허만대;이상욱;김국용;강성수
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제33권4호
    • /
    • pp.524-532
    • /
    • 2009
  • In the mechanical clutches, the pressure plate is one of the important parts for transferring the power and reducing the vibration. Instead of gray and ductile irons, CGI(Compacted Graphite Cast Iron) is concerned to be the replacement recently. A thermo-mechanical coupled analysis was performed to investigate the behavior of the pressure plate for manual clutches. Thermal and mechanical properties of three kinds of cast irons were obtained from the mechanical experiments and referred other technical reports. The results of FEM analysis, were well match with the experimental ones. In this designated FEM method, temperature distribution, stress distribution and thermal deformation were successfully gained and these results will help to design the pressure plate which was made by cast irons including CGI.

영상처리기법을 이용한 표면균열길이 측정 (Measurement of Surface Crack Length Using Image Processing Technology)

  • 남승훈;김용일;김시천;류대현
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.96-101
    • /
    • 2001
  • The development of a new experimental method is required to easily observe the growth behavior of fatigue cracks. To satisfy the requirement, an image processing technique was introduced to fatigue testing. The length of surface fatigue crack could be successfully measured by the image processing system. At first, the image data of cracks were stored into the computer while the cyclic loading was interrupted. After testing, crack length was determined using image processing software which was developed by ourselves. Block matching method was applied to the detection of surface fatigue cracks. By comparing the data measured by image processing system with the data measured by manual measurement with a microscope, the effectiveness of the image processing system was established. If the proposed method is used to monitor and observe the crack growth behavior automatically, the time and efforts for fatigue test could be dramatically reduced.

  • PDF

영상처리기법을 이용한 균열 진전 측정시스템 개발 (Development of Measurement System for Crack Growth Using Image Processing Technology)

  • 류대현;남승훈;김용일;김시천
    • 한국안전학회지
    • /
    • 제17권4호
    • /
    • pp.11-18
    • /
    • 2002
  • We proposed a new experimental method which is required to easily observe the growth behavior of fatigue cracks. In the proposed method, the image data of cracks were stored into the computer while the cyclic loading was interrupted. After testing, crack length was determined using an image processing software which was developed by authors. By comparing the data measured by the image processing system with those by the manual measurement with a microscope, the effectiveness of the image processing system was established. If the proposed method is used to monitor and observe the crack growth behavior automatically, the time and efforts for fatigue test could be dramatically reduced.

중앙행정기관 재난관리계획 수립에 관한 연구 (A Study on Establishing Disaster Management Plan for Central Administration Office)

  • 김무준;김계현;권문진
    • 한국방재학회 논문집
    • /
    • 제10권3호
    • /
    • pp.61-69
    • /
    • 2010
  • 지구 온난화와 도시화로 인한 자연 생태계의 악화가 지속됨에 따라 전 세계적으로 재난이 다양해지고 규모도 증가하고 있다. 이로 인한 재해 발생과 피해 규모가 급증하고 있으며 체계적인 재난관리가 시급한 실정이다. 국제적으로 9.11테러와 쓰나미 사건을 계기로 표준화된 재난관리의 필요성이 높아졌으며 재난관리표준을 수립하고 활용하기 위한 연구와 개발이 증가되고 있다. 따라서 본 연구에서는 국가재난관리표준(안)을 기반으로 재난관리 업무매뉴얼을 생성하여 재난관리계획 수립을 지원하고자 하였다. 이를 위해 현재 중앙행정기관에서 수행되고 있는 재난관리 활동을 분석하였고 재난관리 업무, 기능, 조직, 참조, 행동 라이브러리의 설계와 관리방안을 제시하였다. 또한 체계적인 재난관리 업무를 지원하고 재난관리 활동의 효율성을 극대화 할 수 있는 업무매뉴얼 생성 방안을 제시하였다. 업무매뉴얼은 재난 유형별 중앙행정기관에서 수행해야 할 업무와 필요한 긴급지원기능을 적용하고 참조정보와 행동요령 등을 포함시켜 재난관리에 있어 예방, 대비, 대응, 복구 단계별 체계적인 재난관리계획 수립을 용이하게 지원할 수 있다.

국립암센터의 양성자 치료를 위한 수동형 다엽 콜리메이터 개발 (Development of Manual Multi-Leaf Collimator for Proton Therapy in National Cancer Center)

  • 이누리;김태윤;강동윤;최재혁;정종휘;신동호;임영경;박정훈;김태현;이세병
    • 한국의학물리학회지:의학물리
    • /
    • 제26권4호
    • /
    • pp.250-257
    • /
    • 2015
  • 양성자 치료를 위해서는 Snout이 부착된 받침대(gantry)를 사용하는데 빔의 형태를 만들기 위해 환자 종양의 크기와 거리에 맞게 황동 차폐체(aperture)가 많이 사용된다. 또한 빔의 거리를 보정하기 위해 PMMA를 이용한 거리 보상체도 사용된다. 이렇게 황동으로 만들어진 차폐체의 경우 가공하는데 많은 시간이 소요되며 비용 발생이 높다. 또한 치료 사용되었던 차폐체의 방사선 노출에 따라 재사용이 어렵다. 이러한 단점을 보안하기 위해 황동 차폐체 대신 X-선 치료에서 사용되는 수동형 다엽 콜리메이터 시스템을 도입하였다. 수동형 다업 콜리메이터는 여러 개의 황동판을 조립하여 차폐체를 제작하는 방식이다. 본 연구는 제작된 수동형 다엽 콜리메이터의 방사화 실험 및 필름을 이용해 선량측정을 진행하였다. 다엽 콜리메이터를 투과한 2차 발생 선량 1% 이하였으며, 여러 번의 230 MeV의 빔에서도 방사화가 2시간 이내에서 감소하였다. 이렇게 개발된 수동형 다엽 콜리메이터를 임상에 적용하여 일반 차폐체와 수동형 다엽 콜리메이터를 감마지표 분석을 했을 시 99.74%의 높은 일치도가 측정되었다. 또한, 일반 황동 차폐체에 비해 수동형 다엽 콜리메이터를 제작하는데 소요되는 비용과 시간을 1/10 이상 단축시킬 수 있다. 개발된 수동형 다엽 콜리메이터는 성공적으로 양성자 환자치료에 사용하고 있다.

건설근로자의 피로도와 스트레스 및 재해위험의 구조적 관계 (Study on the Structural Relation between the Level of Fatigue and Stress of Construction Workers and Disaster Risks)

  • 양용구;김병석
    • 대한안전경영과학회지
    • /
    • 제16권3호
    • /
    • pp.35-44
    • /
    • 2014
  • This study empirically examines how much effect levels of fatigue and stress of a construction worker have on disaster risks from the perspective of human factors concerning construction disaster risks. To achieve the purpose of this study, a survey was conducted with respect to construction workers working at large construction sites within the metropolitan area. The retrieved survey data were analyzed by using the statistical software programs, SPSS 18.0 and AMOS 8.0. The results of this study do not definitively lead to the conclusion that the level of fatigue or stress of construction workers result in disaster risks. However, it does show that the results vary depending upon the individual approach and treatment of stress and fatigue. In particular, this study revealed that disaster risk levels could increase through unsafe behavior intentions which were established as a mediator variable. Also, with respect to unsafe behavior intentions of construction workers leading to disaster risks, when examining the results that the level of mental fatigue, occupational stress and social-psychological stress of construction workers had a greater significant effect than the level of physical fatigue, this study demonstrates the importance of psychological and mental issues that could be easily overlooked with respect manual labor workers.