• Korean Security Journal
• /
• no.43
• /
• pp.205-230
• /
• 2015

This study aims to compare the differences of crucial factors that are associated with probation warning tickets between sex offenders and non-sex offenders in South Korea. Serious high-profile cases have occurred in recent years which resulted in public and political conners for successful sex offender management and monitoring strategy through community corrections. The official response has been to initiate a series of legislative probation and parole measures by using GPS electronic monitoring system, chemical castration, and sex offender registry and notification. In this context, the current study is designed to explore the major factors that could affect the failure of probation by comparing the differences between sex offenders and non-sex offenders in terms of their major factors which are related to the failure of probation. The failure of probation is measured by the number of warning tickets which would be issued when there is the violation of probation conditions. The data is obtained from Seoul Probation office from January, 29, 2014 to February, 28, 2014. The sample number of sex offenders is 144 and the number of non-sex offenders is 1,460. The data includes the information regarding the offenders who completed their probation order after they were assigned to Seoul Probation in 2013. Furthermore, this study uses the chi-square and logistic regression analysis by using SPSS statistical package program. The result demonstrated that only prior criminal history was statistically significant factor that was related to the number of warning tickets in the sex offender group when other variables were controlled($X^2=25.15$, p<0.05, Nagelkerke $R^2=0.23$)(b=0.19, SE=0.08, p<0.05). By contrast, there were various factors that were associated with the number of warning tickets in non-sex offender group. Specifically, the logistic regression analysis for the non-sex offenders showed that demographic variable(marital status and employment type), offender-victim relationships, alcohol addiction, violent behavior, prior criminal history, community service order, and attendance order were statistically significant factors that were associated with the odds of warning tickets. Further policy implication will be discussed.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.417-428
• /
• 2011

Depending on the plastic deformation capacity required, structural steel design under the current codes can be classified into three categories: elastic, plastic, and seismic design. Most of the current steel codes explicitly forbid the use of a steel material with a yield strength higher than 450 MPa in the plastic design because of the concerns about its low plastic deformation capacity as well as the lack of test data on local and lateral torsional buckling behavior. In this study, flexural tests on full-scale H-shape members built with SM490A (ordinary steel or benchmark material) and HSB800 (high-strength steel) were carried out. The primary objective was to investigate the appropriateness of extrapolating the local buckling criterion of the current codes, which was originally developed for normal-strength steel, to the case of high-strength steel. All the SM490A specimens performed consistently with the current code criteria and exhibited sufficient strength and ductility. The performance of the HSB800 specimens was also very satisfactory from the strength perspective; even the specimens with a noncompact and slender flange developed the plastic moment capacity. The HSB800 specimens, however, showed an inferior plastic rotation capacity due to the premature tensile fracture of the beam bottom flange beneath the vertical stiffener at the loading point. The plastic rotation capacity that was achieved was less than 3 (or the minimum level required for a plastic design). Although the test results in this study indicate that the extrapolation of the current flange local-buckling criterion to the case of high-strength steel is conservative from the elastic design perspective, further testing together with an associated analytical study is required to identify the causes of the tensile fracture and to establish a flange slenderness criterion that is more appropriate for high-strength steel.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.115-130
• /
• 2013

In this study, lateral-torsional buckling (LTB) strength of high-strength H-beams built up from 800MPa tensile-strength steel was experimentally and analytically evaluated according to current lateral stability provisions (KBC 2009, AISC-LRFD 2010). The motivation was to evaluate whether or not current LTB provisions, which were originally developed for ordinary steel with different stress-strain characteristics, are still applicable to high-strength steel. Two sets of compact-section specimens with relatively low (Set A) or high (Set B) warping stiffness were prepared and tested under uniform moment loading. Laterally unbraced lengths of the test specimens were controlled such that inelastic LTB could be induced. All specimens exhibited LTB strength exceeding the minimum limit required by current provisions by a sufficient margin. Moreover, some specimen in Set A reached a rotation capacity required for plastic design, although its laterally unbraced length belonged to the inelastic LTB range. All the test results indicated that extrapolation of current provisions to high-strength steel is conservative. In order to further analyze the test results, the relationship between inelastic moment and laterally unbraced length was also derived in explicit form for both ordinary- and high-strength steel based on the effective tangent modulus of inelastic section. The analytical relationship derived again showed that extrapolation of current laterally unbraced length limit leads to a conservative design in the case of high-strength steel and that the laterally unbraced length to control the inelastic LTB behavior of high-strength steel beam should be specified by including its unique post-yield strain-hardening characteristics.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.110-139
• /
• 2020

Reclamation is the act of creating new lands by constructing dikes in offshore tidal flats to utilize them for various purposes, including the establishment of farmland to secure food for an increasing population. Based on the fact that reclamation has resulted in drastic changes in the environmental, economic, social, and cultural aspects of land expansion and development, population movement, and the formation of cities since ancient times, I reviewed the value of reclamation sites and addressed the issue of how to preserve and utilize them. "Reclamation culture" refers collectively to the recognition and concept system, behavior styles, and cultural products created by changes in the environment, and the tangible, intangible, and natural heritage generated directly and indirectly by reclamation is defined as "reclamation cultural heritage". It shows that the historical background of reclamation accords with prevailing trends, and that the reclamation sites possess cultural heritage value due to their historical, academic, and scarce characteristics. Numerous reclamation cultural heritage sites at the Gwangwhal and Gyehwa dikes are on the verge of being destroyed, with their original function having ended after the construction of Saemangeum Sea Wall. I propose measures to preserve these under the principle that utilization is based on the basic premise of conservation. First of all, modern and contemporary reclamation sites must necessarily be designated and managed as registered cultural properties, local cultural heritage, future heritage, and agricultural heritage. In particular, as it has been confirmed that reclamation sites created after the Goryeo and Joseon dynasties and the 1950s have not been designated as cultural heritage sites. It is necessary to review the characteristics and values of such reclamation sites through a full survey of national reclamation data. Effective and sustainable utilization of reclamation cultural heritage, which has not been acknowledged in the past due to its close relationship with our lives, is necessary to search for hidden stories found within that heritage, to organize governance for the efficient use of reclamation resources, and to build a museum to collect and display the history and culture of the reclaimed areas. Finally, through links with countries with experience in reclamation, we will be able to cope jointly with international issues such as those pertaining to society, culture, and environment, and would be able to implement various projects to further the advancement of human beings.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.1
• /
• pp.21-26
• /
• 1994

Lysimeter experiments were carried out to study the vertical distribution of inorganic nitrogen, the changes in pHs of soil and leachate and the fate of applied nitrogen with or without grass. The concentration of $NO_3-N$ of surface soil(0~20cm) at the rates of 0, 7, 14 and 21kg N/10a ranged from 4 to 13mg/kg, while those of subsurface soi1(20-40cm) were below 10mg/kg at 0, 7 and 14kg N/10a and subsequently increased to 83.8mg/kg at 35kg N/10a. The concentration of $NH_4{^+}-N$ was positively correlated with that of $NO_3-N$ for surface soil(>0.05). However, the concentration of $NH_4{^+}-N$ was negatively correlated with that of $NO_3-N$ for subsurface soil. A positive correlation was observed between $NO_3-N$ and extractable cations of soils. The pH of subsurface soil decreased with the $NO_3-N$ concentration and the N application rate, while that of leachate inereased with the N application rate. The pH differences between subsurface soil and leachate were 2.5 for bare soil and 3.1 for 35kg N/10a. Higher N application rate caused more soil N accumulation and the gas loss and resulted in a larger difference between N uptake by grass and the applied N.

• Journal of Veterinary Clinics
• /
• v.10 no.1
• /
• pp.111-130
• /
• 1993

Lead toxicity was evaluated in forty-five cats on a balanced diet, Treated with 0(control), 10, 100(low), 1, 000, 2, 000, and 4, 000(high) ppm of lead acetate orally on a body weight basis. The objectives were to establish toxic dosage level of leaf in cats, to characterize changes in behavior and clinical pathology, and to demonstrate what blood lead concentrations correlate with the known dosages of lead. Some high dose cats showed projectile vomiting, hyperactivity, and seizures. The growth rates did not appear to be altered in any of the dosed groups. Normal blood lead concentration in cats were lower than that of humans, dogs, and cattle. Blood lead concentrations of 3 to 20$\mu\textrm{g}$/100$m\ell$ could be termed a 'subclinical' range in the cat. Clinical lead toxicity in cats may have blood lead concentrations ranging 20 to 120$\mu\textrm{g}$/100$m\ell$. Zinc protoporphyrin concentrations were proportional to lead dosages and a significant ZPP elevation, greater than 50$\mu\textrm{g}$/100$m\ell$, may be indicative of clinical lead toxicity. The enzyme aminolevulinic acid dehydratase showed an inverss dose response relationship for all lead dosages and a significant ZPP elevation, greater than 50$\mu\textrm{g}$/100$m\ell$, may be indicative of clinical lead toxicity. The enzyme aminolevulinic acid dehydratase showed an inverse dose response relationship for all lead dosages and appears to be a good indicator of lead exposure in cats. Urinary aminolevuliruc acid concentrations generally increased with lead dosage, but individual values varied. Hair lead concentrations rose proportionately to lead dosages. Lead at least in high doses appears to inhibit chemotactic activity of polymorphonuclear cells and monocytes. No consistent dose response relationships were observed in hemoglobin, RBC, WBC, neutrophil, lymphocyte, monocyte, and eosinophil counts. There were no consistent dose related changes in total protein, plasma protein, BUN, and ALT values. Reticulocyte counts did not increase significantly in most lead dosage levels, and are probably of little value in diagnosing lead toxicity in cats. The fact that no significant changes were found in nerve conduction velocities may support that there was no segmental demyelination resulting from lead ingestion. The lethal dose in cats appear to range from 60 to 150mg/kg body weight. A reliable diagnosis of lead poisoning can be made utilizing blood lead, ZPP, and ALAD, and hair lead.

• Korean Journal of Veterinary Research
• /
• v.11 no.1
• /
• pp.1-39
• /
• 1971

The purpose of present study was to investigate the possibility to immunize guineapigs and swine against Metastrongylus apri infection by the administration of irradiated infective larvae. Four main experiments were undertaken. Firstly, three groups of infective larvae irradiated at $3{\times}10^4r$, $4{\times}10^4r$, and $5{\times}10^4r$ respectively were inoculated to guineapigs and their immunogenic effects were examined from the clinical, anatomical, and serological viewpoints to decide the optimal dose of X-ray for the atenuation of them. Secondly, the migratory behavior of the larvae irradiated at the optimal dose was compared with that of normal infective larvae. Thirdly, pigs were inoculated with each 5,000 infective larvae irradiated at the optimal dose and the clinical, anatomical and serological responses of them before and after challenge were examined. Fourthly, the heated extract of adult M. apri which had been used as an antigen in the serological examinations was analyzed and compared with that of adult Ascaris suis and of adult Trichuris suis by immunoelectrophoretic method. The results obtained are summerized as follows: 1) The optimal dose of X-ray for the atenuation of the infective larvae which can minimize the pathogenecity but keep the antigenecity of the infective larvae was $5{\times}10^4r$. 2) Guineapigs could become completely resistant to subsequent challenge infection by the administration of 1,000 infective larvae irradiated at $5{\times}10^4r$, without showing any symptom of disease before and after the challenge. 3) There were some indication that guineapigs could acquire complete immunity after they overcome the infection with normal infective larvae. 4) It was shown that, in guineapigs, the $5{\times}10^4r$-irradiated larvae can migrate to the large intestine and mesenteric lymph node within a day, where they stay for as long as 16 days to stimulate the host's immunity. 5) It also was shown that, in guineapigs, the normal infective larvae challenged to resistant guineapigs can migrate to the large intestine and mesenteric lymph node, where they are affected by the immune mechanism of host within 10 days without further migration. 6) Pigs could become partially resistant to subsequant challenge by the administration of 5,000 infective larve irradiated at $5{\times}10^4r$; no clinical symptom occurred after the administration, but milder symptoms of parasitic bronchitis were observable after the challenge infection and fewer number of worms were detected from the lungs at autopsy compared with severe symptoms and much number of worms in control pigs. 7) It was shown that, in pigs, a few of the $5{\times}10^4r$-irradiated larvae can migrate to the lungs, where they stay for as long as 104 days in stunted and sterile states; their body-lengths were short and their uteri developted no eggs. 8) There was evidence that the male larvae were more susceptible to X-ray than the female larvae. 9) Antibodies relating to the administration with $5{\times}10^4r$-irradiated or normal larvae were detected from the sera of both guineapigs and pigs by means of indirect haemagglutination and agar diffusion precipitin tests. Relatively higher antibody titers were recorded by the former test, but precipitin bands were demonstrable only when the positive sera were concentrated in one tenth of original volume in the later one. 10) The antibody titers of pig sera began to rose on 14 days, kept their peak during the period from 14 th day to 21st day, and fell to a low level on 28 days after the administration of $5{\times}10^4r$ or normal infective larvae. 11) A slight increase in gamma globublin of the pig sera occurred following the administration. The gamma globulin level showed a tendency to fluctuate in acordance with the antibody level. 12) A marked eosionophilia occurred in pigs on 7 or 14 days following the administration. The eosinophil count showed the same tendency to fluctuate as the gamma globulin did. 13) It was shown that the serum antibodies detected by the heated extract of adult Metastrongylus apri react crossly with the heated extract of adult Ascaris suis but not with that of adult Trichuris suis in indirect haemagglutination and agar diffusion preciption reactions. 14) The heated extract of adult Metastrongylus apri could he divided into 9 antigenic components by immunoelectrophoresis, one (arc 4) of which was shown to be common to both extracts of adult Ascaris suis and adult Trichuris suis, and the other one (arc 9) to only the extract of adult Ascaris suis.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.313-325
• /
• 2007

In order to have better insights into adsorption of organic molecules on kaolinite surfaces, we performed quantum chemical calculations of interaction between three different model clusters of kaolinite siloxane surfaces and benzyl alcohol, with emphasis on the effect of size and lattice topology of the cluster on the variation of electron density and magnetic shielding tensor. Model cluster 1 is an ideal silicate tetrahedral surface that consists of 7 hexagonal rings, and model cluster 2 is composed of 7 ditrigonal siloxane rings with crystallographically distinct basal oxygen atoms in the cluster, and finally model cluster 3 has both tetrahedral and octahedral layers. The Mulliken charge analysis shows that siloxane surface of model cluster 3 undergoes the largest electron density transfer after the benzyl alcohol adsorption and that of model cluster 1 is apparently larger than that of model cluster 2. The difference of Mulliken charges of basal oxygen atoms before and after the adsorption is positively correlated with hydrogen bond strength. NMR chemical shielding tensor calculation of clusters without benryl alcohol shows that three different basal oxygen atoms (O3, O4, and O5) in model cluster 2 have the isotropic magnetic shielding tensor as $228.2{\pm}3.9,\;228.9{\pm}3.4,\;and\;222.3{\pm}3.0ppm$, respectively. After the adsorption, the difference of isotropic chemical shift varies from 1 to 5.5 ppm fer model cluster 1 and 2 while model cluster 2 apparently shows larger changes in isotropic chemical shift. The chemical shift of oxygen atoms is also positively correlated with electron density transfer. The current results show that the adsorption of benzyl alcohol on the kaolinite siloxane surfaces can largely be dominated by a weak hydrogen bonding and electrostatic force (charge-charge interaction) and demonstrate the importance of the cluster site and the lattice topology of surfaces on the adsorption behavior of the organic molecules on clay surfaces.

• The Korean Society of Law and Medicine
• /
• v.19 no.2
• /
• pp.41-72
• /
• 2018

In the division of labor (or teamwork) in medicine, the responsibility of medical and nursing staff should be separated or distributed to justify negligent criminal offenses. The present work refers to the standards by which the due diligence and responsibility of the individual persons are to be determined and delimited. In this context, it has been proven that objective theory as a measure of due diligence is appropriate. From a moral point of view, when assessing due diligence, it makes sense to impose greater individual or higher performance demands on the perpetrator, but law and order require that due diligence should result from socially relevant human behavior. To give objective measure of negligence and to provide the highest level of personal responsibility, so that man can not be burdened too much responsibility and it is accordingly with an equality theorem. Afterwards some points are presented, which should be considered in a concrete fact in the determination of the medical negligence. Medical action has specific characteristics such as professionalism, discretionary and exclusive, unbalance of information. These characteristics distinguish medical actions from general negligence. The general level of knowledge, the urgency, working condition and working environment of the medical facility, duration of the professional practice, assessment of the medical activity are crucial in this context. As a standard of delineation of due diligence, I have used the permitted risk and the principle of trust. In the horizontal division of labor, the principle of trust applies. The principle of trust applies in principle in cases of division of labor interaction, when doctors in the same hospital exercise their own specific occupational field or everyone works in another hospital. However, this is not true for every case. In the vertical division of labor, the principle of trust does not apply and the senior physician can not trust the assistant doctors. In this case, the principle of trust is converted into a duty of supervision for assistant doctors by the senior physician. This supervision requirement could be used as a random check.