• Journal of Sensor Science and Technology
• /
• v.13 no.4
• /
• pp.258-263
• /
• 2004

In this study, we carried out a basic study for the development of optical transcutaneous $pCO_{2}$ gas sensor and analyzer using non-invasive method. The basic principle of $pCO_{2}$ measurement is adapted Beer lambert's law and embodied the system using NDIR method. This measuring system was composed of a IR lamp, a optical filter, a optical reaction chamber, pyroelectric sensor and a signal process. We measured $EtCO_{2}'s$ concentration in basis step instead of $pCO_{2}$ gas that can collect by inflicting heat in outer skin. We minimize the size of optical reaction chamber which takes up the largest volume, to make the portable sensor. We made optical reaction chamber in Si wafer using MEMS technology and the optical reaction chamber was shortened to 2 mm and we carried out an experiment. When we injected the $EtCO_{2}$ to the inside of the optical reaction chamber, we could confirm change of 4.6 mV. The system response time was within 2 second that is fairly fast.

• Journal of Biomedical Engineering Research
• /
• v.44 no.1
• /
• pp.85-91
• /
• 2023

Stress urinary incontinence (SUI) occurs when abdominal pressure increases, such as sneezing, exercising, and laughing. Surgical and non-surgical treatments are the common methods of SUI treatment; however, the conventional treatments still require continuous and invasive treatment. Laser have been used to treat SUI, but excessive temperature increase often causes thermal burn on urethra tissue. Therefore, the optimal conditions must be considered to minimize the thermal damage for the laser treatment. The current study investigated the feasibility of the laser irradiation condition for SUI treatment using non-ablative 980 nm laser from a safety perspective through numerical simulations. COMSOL Multiphysics was used to analyze the numerical simulation model. The Pennes bioheat equation with the Beer's law was used to confirm spatio-temporal temperature distributions, and Arrhenius equation defined the thermal damage caused by the laser-induced heat. Ex vivo porcine urethral tissue was tested to validate the extent of both temperature distribution and thermal damage. The temperature distribution was symmetrical and uniformly observed in the urethra tissue. A muscle layer had a higher temperature (28.3 ℃) than mucosal (23.4 ℃) and submucosal layers (25.5 ℃). MT staining revealed no heat-induced collagen and muscle damage. Both control and treated groups showed the equivalent thickness and area of the urethral mucosal layer. Therefore, the proposed numerical simulation can predict the appropriate irradiation condition (20 W for 15 s) for the SUI treatment with minimal temperature-induced tissue.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.2
• /
• pp.156-164
• /
• 1990

A field experiment was conducted to study both the distribution characteristics of photosynthetically active radiation (PAR) in the soybean canopy and their relationships with dry matter production. The soybean cultivars 'Hwanggeumkong' and 'Paldalkong' were sown with the spaces of 60$\times$15cm and 30$\times$15cm at Suwon on May 20 and on June 20 in 1989. The ratio of PAR to the total shortwave radiation was estimated by the empirical equation derived from sunshine hours and direct incoming radiation. The functional relationships between the PAR interception and the leaf area index were expressed as a function of Beer's law. The extinction coefficients(k) in the functions ranged from 0.77 to 0.92. The values of k were greater at higher planting density, but they were affected neither by planting dates nor by varieties. The reflection ratio of PAR($\alpha$) was determined by the exponential function as below; $\alpha$=$\alpha$p-($\alpha$p-$\alpha$o) exp(-kㆍLAI) where $\alpha$p was the reflectance at the maximum LAI and $\alpha$o was that of the bare soil. The ap ranged from 0.025 to 0.035 and $\alpha$o ranged from 0.11 to 0.12, respectively. The reflected PAR ranged from 0.049 to 0.064 and the transmitted PAR ranged from 0.168 to 0.340 until maximum dry weights were observed. The slope from the linear regression of dry matter on absorbed PAR, conversion efficiency, ranged from 1.30 to 2.3g MJ$^{-1}$ during the growing season until maximum dry weight was reached. The total dry matter yield above ground (TDM) increased with the increases in the conversion efficiency. TDM was higher in Hwanggeumkong than Paldalkong and higher in the space of 30$\times$15cm than 60$\times$15cm, Paldalkong showed higher harvest index than Hwanggeumkong. than Hwanggeumkong.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1529-1532
• /
• 2005

A simple and cost effective method for separation and preconcentration of Ag(I) at the $10^{-7}\;mol\;L^{-1}$ level in the environmental and mineral samples is present. The method is based on the flotation of Ag(I)-iodide complex as an ion-associate with ferroin in pH of 4 from a large volume of an aqueous solution (500 mL) using nheptane. The floated layer was then dissolved in dimethylsulfoxide (DMSO) for the subsequent spectrophotometric determination. Beer's law was obeyed over a range of 2.0 ${\times}$ $10^{-7}$-4.0 ${\times}$ $10^{-6}$ mol $L^{-1}$ with the apparent molar absorptivity of 2.67 ${\times}$ $10^5$ L $mol^{-1}\;cm^{-1}$. The detection limit (n = 5) was 4 ${\times}$ $10^{-8}$ mol $L^{-1}$, and RSD (n = 5) obtained for 2.0 ${\times}$ $10^{-6}$ mol $L^{-1}$ of Ag(I) was 2.2%. The interference effects of a number of elements was studied and found that only $Hg^{2+}$ at low concentration, and $Pb^{2+}$, $Cd^{2+}$, $Cu^{2+}$, and $Fe^{3+}$ ions at moderately high concentrations were interfered. To overcome on these interference effects, the solution was treated with EDTA at a buffering pH of 4 and passed through a column containing Amberlite IR-120 ionexchanger resin, just before the flotation process. The proposed method was applied to determine of Ag(I) in a synthetic waste water, a photographic washing sample and a geological sample and the results was compared with those obtained from the flame atomic absorption spectrometry. The results were satisfactorily comparable with together, so that the applicability of the proposed method was confirmed in encountering with the real samples.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.13-17
• /
• 2007

Purpose: To understand the pathogenesis of the disease that presents abnormally proliferated vascular endothelial cells, a model of DMH(1,2-dimethylhydrazine)-induced abnormal proliferation of HUVECs(Human Umbilical Vein Endothelial Cells) was made. We indirectly determined that Protein Kinase C(PKC) restricts the cellular proliferation and inhibits the manifestation of growth factor by using several inhibiting substances of the transmitter through our previous studies. Thereupon, we attempted to observe direct enzymatic activities of PKC and its correlation with the abnormal proliferation of vascular endothelial cells. Methods: $10^5$ HUVECs cells were applied to 6 individual well plates in three different groups; A control group cultured without treatment, a group concentrated with $0.75{\times}10^{-8}M$ DMH only, and a group treated with DMH & $5{\times}10^{-9}M$ Calphostin C, inhibitor of PKC. In analyzing the formation of intracellular PKC enzyme, protein separation was performed, and separated protein was quantitatively measured. PKC enzyme reaction was analyzed through Protein Kinase C Assay System (Promega, USA), and the results were analyzed according to Beer's law. Results: Enzymatic activity of PKC presented the highest in all reaction time of a group concentrated only with DMH, and the lowest in the control group. The group treated with DMH and the inhibitor revealed statistically lower enzymatic activity than group only with DMH in all reaction time, although higher than the control group. Conclusion: From the enzymatic aspect, most active and immediate reaction of the PKC was observed in the group concentrated with DMH only. The group treated with DMH & PKC inhibitor showed meaningful decrease. Accordingly, PKC holds a significant role in DMH-induced abnormal proliferation of vascular endothelial cells.

• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.19-25
• /
• 1989

In past, dye diffusion and dyeing rate in fibers have been emphasized in dyeing phenomena. However, in the light of the properties of colloids in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Electrostatic bonding, hydrogen bonding and Van der Waals adsorption are common in dyeing as well as covalent bonding. Particularly, electrostatic bonding is premised on the existance of ionic radicals in fibers. The present study was aimed to clarify the electrokinetic phenomena of dyeing through the role of electric double layer by ion in amphoteric fibers with different ionic effects under different pH. Spectrophotometric analysis method was used to compare dyeing condition of surface, which can be detected by electrokinetic phenomena and the inner of fibers after deceleration of dyed fibers. Nylon and wool, the typical amphoteric fibers were dyed with monoazo acid dyes such as C.I. Acid Orange 20, and C.I. Acid Orange 10. Various combinations were prepared by combining pH, temperature and dye concentration, in order to generate streaming electric potential which were measured by microvolt meter and specific conductivity meter. The results were transformed to zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers. The amount of dyes of inner fibers were also measured by the Lambert-Beer’s law. The main results obtained are as follows. 1. By measuring zeta pontential, it was possible to detect the dyeing mechanism, surface charge density, surface dye amount and effective surface area concerning dye adsorption of the amphoteric fibers. 2. Zeta pontential increases in negative at low pH and high dye concentration in the process of dyeing. This implied that there existed ionic bond formation in the dyeing mechanism between acid dyes and amphoteric fibers. 3. Dibasic acid dye had little changing rate in zeta potential due to the difference in solubility of dye and in number of dissociated ions per dye molecule to bond with amino radicals of amphoteric fibers. The dye adsorption of mono basic acid dye was higher than that of dibasic acid dye. 4. The effective surface areas concerning dyeing were $6.3E+05\;cm^2/g$ in nylon, $1.6E+07\;cm^2/g$ in wool fiber being higher order of wool then nylon.

• Applied Microscopy
• /
• v.38 no.1
• /
• pp.51-61
• /
• 2008

This simulation study examined the effect of data acquisition error including the data type of TEM image, and incident beam intensity of the tilt series on 3D tomograms. Simulation was performed with the 3D head phantom model of Kak and Slaney, and the slightly modified 3D head phantom model with enhanced difference in absorption coefficients. Reconstructed tomogram for the original head phantom model using 8-bit gray-scale image was distorted with extremely high level of noise, while an acceptable result was obtained for the modified model. The results for the original model using wrong formulation for the transmitted beam intensity was proved to be incorrect. The high level of noise along the z direction was found in case of the modified model. On the other hand, the wrong value of incident beam intensity in both models gave distorted results. In order to reconstruct an artifacts-free 3D structure from the projections with invisible features in electron tomography, the 16-bit projection images should be used with the correct incident beam intensity which is applied to Beer's law.

• Journal of Society of Preventive Korean Medicine
• /
• v.8 no.2
• /
• pp.81-98
• /
• 2004

1. The cell viability was determined by MTT method. Their cytotoxic activities against three cancer cell lines such as A549, MDA-MB-231 and SNU-C4 cell line were tested. Among them, The methanol extract of Saururus chinensis Baill. showed the strongest cytotoxic effect against SNU-C4 cells. These results suggest that the methanol extract of Saururus Chinensis Baill. possessed a potential antitumorous agent. 2. In vitro the antitoxic activity of ethanol extract of Saururus Chinensis Bail on NIH 3T3 fibroblasts was evaluate by the MTT (3-(4,5-dimethyl- thiazol-2-yl)-2,5-diphenyl-2H-tetra캐lium bromide) and SRB (sulforhodamine B protein) assays. The number of NIH 3T3 fibroblasts were increased and tend to regenerate. These results suggest that Saururus Chinensis Bail extract retains a potential antitoxic activity. 3. Complexation of Cd (II) ion with ligands such as quercetin has been determined by UV-vis spectrophotometric method in tris buffer solution at various pH. It was found that only 1 : 1 Cd-complex is formed by the interaction between catechol moiety in ring B and cadmium [Cd(II)] in aqueous solution. The spectral parameters for Cd-complex were determined by Beer's law at various pH. It has shown that 1 : 1 Cd-complex has a maximum absorbance and red shift by the alkaline pH.

• Journal of the Korean Chemical Society
• /
• v.50 no.4
• /
• pp.298-306
• /
• 2006

A rapid, simple and sensitive validated spectrophotometric methods have been described for the assay of neomycin and streptomycin either in pure form or in pharmaceutical formulations. The proposed methods were based on the oxidation of the studied drugs by a known excess of potassium permanganate in acidic medium and estimating the unreacted permanganate with amaranth dye (method A), acid orange II (method B), indigocarmine (method C), and methylene blue (method D), in the same acid medium at a suitable lmax=521, 485, 610 and 664 nm, respectively. Beers law is obeyed in the concentration range of 5-10 and 2-7 mg mL-1 for neomycin and streptomycin, respectively. The apparent molar absorptivity and sandell sensitivity values are in the range 5.47-6.20104, 2.35-2.91105 L mol-1 cm-1 and 7.57-8.59, 5.01-6.2 ng cm-2 for neomycin and streptomycin, respectively. Different variables affecting the reaction were studied and optimized. The proposed methods were applied successfully to the determination of the examined drugs either in a pure or pharmaceutical dosage forms with good accuracy and precision. No interferences were observed from excipients and the results obtained were in good agreement with those obtained using the official methods.

• Journal of Forest and Environmental Science
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1983

The purpose of this study was to elucidate the ecophysiological habitat of natural Sorbus commixta forest at Mt. Seorak. The results obtained were as follows: 1. The Sorbus commixta trees mainly distributed from 900m to 1,500m altitude. In there, the warm index(WI) was about 42$3.2{\times}10^3$ to $9.2{\times}10^3$, cation exchange capacity(CEC) was 13.7 to 19.5mg/100g, N content 0.21 to 0.39%, $P_2O_5$ content was 22.6 to 38.7ppm, and pH value was 5.6 to 5.8 respectively. 4. The upper crown trees in Sorbus commixta communities were Abies nephrolepis, Taxus cuspidata, Betula platyphylla var. japonica, Quercus${\times}$grosseserrata, Acer mono, Prunus sargentii, Carpinus cordata, Tilia amurensis, and the under crown trees were Rhododendron brachycarpum, Acer pseudo-sieboldianum, Thuja olientalis, Corylus heterohpylla, Philadelphus schrenckii, Rhododendron schlippenbachii, Rhododendron mucronulatum, and Magnolia sieboldii. 5. The stand densities were 1,156 trees/ha at 1,160m and 3,600 trees/ha at 1,300m respectively. The coverages by the DBH basal area were 0.37 at 1,160m and 0.31 at 1,300m respectively, and the vegetation coverages by the crown projection area were 2.04 at 1,160m and 1.61 at 1,300m respectively. 6. The light extinction coefficient(k) in Beer-Lambert's law, showed the distance, F(z), from top canopy to aboveground, was 0.17. 7. The water relations parameters of Sorbus commixta shoot were obtained by the pressure chamber technique. The osmotic pressure, ${\pi}_o$, at maximum turgor was -16.2 bar, and VAT pressure was 14.5bar. The osmotic pressure, ${\pi}_p$, at incipient plasmolysis was -19.4bar. The relative water contents at incipient plasmolysis were 83.1% ($v_p/v_o$) and 87.1%($v_p/w_s$;$w_s$, total water at maximum turgor). 8. The bulk modulus of elasticity(E) of shoot was about 69.6. The total symplasmic water to total water in shoot was 67.7%, and the apoplastic water to total water was 32.3%.