• 한국태양에너지학회 논문집
• /
• 제34권4호
• /
• pp.1-7
• /
• 2014

The microgrid system is the combination of photovoltaic(PV) array, load, and battery energy storage system. The control strategies were defined as multi-modes of operation, including rest operation without use of battery, power charging, and power discharging, which enables grid connected mode or islanded mode. Photovoltaic power is a problem of the uniformity of power quality because the power generated from solar light is very sensitive to variation of insolation and duration of sunshine. As a solution to the above problem, energy storage system(ESS) is considered generally. There fore, in this study, we did basic research activities about optimization method of the amount of energy used, using a smart microgrid test-bed constructed in building. First, we analyzed the daily, monthly and period energy pattern amount of power energy used, and analyzed PV power generation level which is built on the roof. Utilizing building energy pattern analysis data, we was studied an efficient method of employing the ESS about building power consumption pattern and PV generation.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.357-373
• /
• 2022

The high-temperature gas-cooled reactor pebble-bed module project is the first commercial Generation-IV NPP(Nuclear Power Plant) in China. A new joint is used for the vertical support of RPV(Reactor Pressure Vessel). The steel corbel is integrally embedded into the reactor-cabin wall through eight asymmetrically arranged pre-stressed high-strength bolts, achieving the different path transmission of shear force and moment. The vertical monotonic loading test of two specimens is conducted. The results show that the failure mode of the joint is bolt fracture. There is no prominent yield stage in the whole loading process. The stress of bolts is linearly distributed along the height of corbel at initial loading. As the load increases, the height of neutral axis of bolts gradually decreases. The upper and lower edges of the wall opening contact the corbel plate to restrict the rotation of the corbel. During the loading, the pre-stress of some bolts decreases. The increase of the pre-stress strength ratio of bolts has no noticeable effect on the structure stiffness, but it reduces the ultimate bearing capacity of the joint. A simplified calculation model for the elastic stage of the joint is established, and the estimation results are in good agreement with the experimental results.

• 한국습지학회지
• /
• 제16권1호
• /
• pp.51-59
• /
• 2014

본 연구의 목적은 직렬연결 수직 및 수평 흐름 갈대 제올라이트 인공습지에 생활하수를 간헐적으로 주입하였을 때 처리효율을 조사하는 것이다. 각 항목별 유입수에 대한 평균 처리효율은 수직 흐름 인공습지 유출수에서 BOD 92.42%, $COD_{Cr}$ 79.02%, $COD_{Mn}$ 80.62%, SS 98.33%, T-N 37.06%, $NH{_4}^+-N$ 99.45%, T-P 57.96%이었으며 수평 흐름 인공습지 유출수에서 BOD 95.56%, $COD_{Cr}$ 91.02%, $COD_{Mn}$ 87.78%, SS 99.22%, T-N 45.87%, $NH{_4}^+-N$ 99.88%, T-P 71.17%이었다. 최종 유출수 중 T-N은 대부분이 $NO{_3}^--N$이었으며 $NO{_2}^--N$은 평균 0.04mg/L 이하이었다. 특히, 갈대 제올라이트 인공습지는 SS와 $NH{_4}^+-N$의 처리에 탁월하였다.

• 한국콘텐츠학회논문지
• /
• 제15권8호
• /
• pp.544-555
• /
• 2015

본 연구는 농경유역 중소하천의 주요 지점에서 실측된 현장자료를 사용하여 유량과 총유사량 관계곡선과 이들 간의 관계식을 유도한다. 실측치 총유사량 자료는 수심평균농도와 하상에서 각각의 부유사와 소류사 채취기(DH-48, D-74 및 BLH-84, BL-84)에 의해 채집된 시료를 건조 또는 여과법, 체분석에 의한 입도분포곡선을 통해 얻은 부유사량에 소류사량을 합하여 얻었다. 이들 현장자료는 농경유역 논산수계 내 4개 대상하천의 국가-지방하천 수로구간 7개 측점에서 2012년 8월부터 2014년 9월까지 측정되었다. 그 결과, 유량과 총유사량에 대한 관계곡선과 관계식은 현장측정 자료군의 분포특성을 분석함으로써 멱함수형으로 유도하였으며, 이들 관계식은 수공 유사공학의 이론적 연구뿐만 아니라 실무적 응용에 있어 세굴, 퇴적 및 이송을 해석하는데 유용한 도구로 사용될 수 있을 것이다.

• 한국물환경학회지
• /
• 제25권5호
• /
• pp.792-802
• /
• 2009

The objective of this study is to construct the watershed management system with link of the non-point sources model and to estimate delivery ratio duration curves for various pollutants. For the total water pollution load management system, non-point source model should be performed with the study of the characteristic about non-point sources and loadings of non-point source and the allotment of pollutant in each area. In this study, daily flow rates and delivered pollutant loads of Nakdong river basin are simulated with modified TANK model and minimum variance unbiased estimator and SWAT model. Based on the simulation results, flow duration curves, load duration curves, and delivery ratio duration curves have been established. Then GIS analysis is performed to obtain several hydrological geomorphic characteristics such as watershed area, stream length, watershed slope and runoff curve number. As a result, the SWAT simulation results show good agreements in terms of discharge, BOD, TN, TP but for more exact simulation should be kept studying about variables and parameters which are needed for simulation. And as a result of the characteristic discharges, pollutants loading with the runoff and delivery ratios, non-point sources effects were higher than point sources effects in the small-scale test bed of Nakdong river basin.

• Journal of Biosystems Engineering
• /
• 제16권1호
• /
• pp.83-89
• /
• 1991

One of the most serious problems in Korean sericulture farms is to improve the adiabatic conditions for the simple silkworm rearing houses which has been widely adapted since early 1980'. Thus, this study is aimed to solve the problems by selecting the thermal screen material and by finding the method of its instalation. For the study, 4 kinds of materials which are (1) TE005,(2) NW60, (3) NW300 and (4) AL110 are selected and 4 different types of methods which are surrounding boundary of rearing bed(type A), surrounding inside of wall and ceiling (type B), installing on inside of wal ony (type C) and installing on ceiling Inly (type D) are installed. Decision criteria of the best combination of screen material and installation methods is made by calculating the heating load coefficients and by testing the application at the simple silkworm rearing houses. The obtained results are summarized as follows ; 1. The effect of thermal screen on reducing the thermal energy is remarkable. It saves energy more 50% than unscreened simple silkworm rearing houses. 2. From a stand point of a good screed material on thermal energy reduction, the NW300, AL110 and PE005 are recommanded materials. However, NW60 and PE005 are regarded as desirable materials from the practical point view. 3. Also, the effect on thermal energy reduction is largely affected by the method of thermal screen installation. The surrounding boundary of the silkworm rearing bed(type A) is the most desirable method to reduce the energy, which saves 56.6% of it. 4. In the practical application, NW60 and type A is considered to be the best combination of material and installation method. By this combination, the level of maximum heating load can be reduced at the rate of 43% for spring season and 40% for autumn season. 5. Another heating method, comparted heating, can be recommended to save the energy.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.4125-4132
• /
• 2011

IPTV 멀티캐스팅 서비스에서 증가되는 네트워크 트래픽 로드에 따른 화상 품질 측정과 화상 품질 변화에 대한 연구는 IPTV 서비스에 대한 관심이 현실화됨에 따라 필요하게 되었다. 본 연구에서는 네트워크 트래픽 로드에 따른 화상 품질의 효과가 주어지는 네트워크 성능 요소의 최적의 값을 파악하기 위하여, 테스트 베드 네트워크를 통하여 테스트 하는 S/W를 개발하였다. 그리고 테스트 환경을 학교 네트워크로 확장하여 실제 IPTV 서비스 환경과 비슷한 학교 네트워크에서 네트워크 트래픽 로드 증가에 따른 IPTV 멀티캐스팅 서비스의 화상 품질 변화를 측정하고자 하였다.

• 한국지반환경공학회 논문집
• /
• 제24권1호
• /
• pp.37-44
• /
• 2023

본 연구에서는 도로의 건설 시간 및 유지관리 비용을 단축하기 위하여 제안된 지속가능한 장수명 모듈러 도로시스템의 하부구조인 지지 모듈러의 성능을 평가하였다. 하부 곡선면을 가진 Cross-Beam 형태의 지지 모듈러 4개로 구성된 모듈러 도로시스템을 Test-bed에 시공하였다. 6개의 하중계와 8개의 변위계를 중앙부 2개 Cross-Beam 형태의 지지 모듈러에 설치하였다. 2개의 하중, 50kN, 100kN을 도로 포장슬래브 15개 지점에 재하하여 모듈러 도로시스템에서 발생하는 하중 및 변위를 측정하였다. 측정된 변위들은 1mm 미만으로 실제 도로의 안정성에 문제가 없을 것으로 판단된다. 현장실험에서 적용된 2개의 재하 하중들과 측정된 하중값들을 비교해 보았을 때 하부 지반에 전달되는 하중은 매우 작은 것으로 판단된다. 지지 모듈러를 가진 모듈러 도로 시스템을 실제 도로현장에 적용 가능한 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.277-281
• /
• 1997

Reliab~l~ty englneerlng IS regarded as the major and important roll for all Industry And advanced nianufactur~ng systems w~th h~gh speed and lntell~gent ha\\ulcorner been dcvelop~ng for betterment of lnachln~ng db~l~ty In th~study, Me have rystem~~ed c\, ~luat~on c r f relidb~litl for nldchlntry system We proposed the rel~ab~l~ty asvxmcnt and dci~yned and manufactured r~ildb~llty tcst-bed to eualuate rcl~dbil~ty In ddd~t~on we acquired relldb~l~ty data uslng test-bed sydem and mde database to handle relrab~l~t) data And also he not only use rel~ab~l~ty data by andlyzlng rel~ab~l~ty, but also apply design revlew method usmg analycing crltlcal unlt5 of machlnery system From th~s stud), he u ~ l l expect to gu~de md Increase the rel~ab~l~t) englneerlng in devclop~ng and procerslng phase of h~gh qualrty product

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.55-61
• /
• 2005

The seismic response tests of a spent fuel dry storage cask model of 1/8 scale are performed for an typical 1940 Elcentro earthquake. This paper focuses on the seismic response test data generation to check the overturing possibility of a storage cask and the slipping displacement on concrete slab bed. A simplified cask model is used to take into account the variations in seismic load magnitude and cask/bed interface friction. The test results show that the model gives an overturning response for an extreme condition.