• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.697-709
• /
• 1999

Two dimensional finite element model(RMA) is applied to examine sediment transport behavior near Buyeo water intake station of the Keum River. The simulation results of bed change with various discharge conditions agree with those of observation. As the alternatives of channel modification and resulting bed lowering near intake station, construction of jetties and removal of small island are considered. The station of jetties diverted the main stream toward the other side and the width of the main stream did not change so much. The bed elevation of the main channel is reduced about 5~20 cm, when flow condition of 12,030㎥/sec applied. The removal of small island provides the less significant effect on sediment movement. This study shows that the construction of jetties would be effective to reduce the entrainment of sediment.

• Journal of Korea Water Resources Association
• /
• v.49 no.8
• /
• pp.693-705
• /
• 2016

In this study, the effects of sediment supply on the downstream of a large dam are investigated using a numerical model. The model simulation shows a good agreement with laboratory experiment results of sediment transport and diffusion from sediment pulses. The water surface changes from the various sediment bed elevations are also simulated using the model. The site which has a relatively stiff bed slope and meandering of a channel is selected as an appropriate location for sediment supply because of its shear stress enough to supply the sediment downstream. The model simulation shows the decrease of channel bed elevation through the simulation period with time. The well-deposition of sediment supplied from the downstream of dam is found in the location where the flow rate is relatively low. A bed relief index is increased with time and it is relatively greater in downstream compared to upstream. The channel bed variability increases as flow rate increases with a greater bed relief index. The results of this study demonstrate the importance of increasing water discharge of a large dam to increase the dynamic of channel bed and thus to enhance the efficiency of channel bed restoration by sediment supply.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4B
• /
• pp.405-411
• /
• 2008

The Nakdong River Estuary Barrage (NREB) was constructed in 1987 to prevent saltwater intrusion and to provide the sustainable water supply in the upstream channel. Sediment dredging has been conducted to eliminate deposited sediments in the approached upstream channel of the NREB. Fluvial changes and sedimentation problems have been continued due to urbanization and development in the watershed as well as construction of the NREB. However, the sufficient field monitoring and researches for sedimentation characteristics and bed changes have not been performed after construction of the NREB. Therefore, bed elevation changes and seasonal sediment concentration distribution were analyzed using the quasi-steady state model with historical field data in this study. The water surface elevation changes with and without sediment dredging operation were calculated using the developed quasi-steady state model and finally the sediment dredging effects were evaluated.

• Journal of Korea Water Resources Association
• /
• v.42 no.5
• /
• pp.425-432
• /
• 2009

Gongneung Weir 2 was built in 1970s to supply water for irrigation. For a long time, the weir was left uncared because of the land use change of the nearby area. The weir is 1.5 m high, and the stream in which the weir was installed has bed materials of fine sands to fine gravels. In 2006, the local government and residents agreed on uninstalling the weir, and the weir was removed completely on April 14. This paper reports the results of three field investigations for the study of the stream morphology change after the weir removal. Changes in grain size distribution, bed elevation, and cross section before and after the weir removal are provided and discussed. Net amount of sediment deposits within 1 km reach of the stream is estimated, and the results illustrates that the sediment process, leading to an equilibrium of the bed, progressed very swiftly, namely within 45 days.

• Mycobiology
• /
• v.31 no.1
• /
• pp.50-53
• /
• 2003

Perforated vinyl mulching technique was performed on oyster mushroom beds for controlling mushroom diseases. Mycelium under vinyl sheets were safely protected from outside undesirable microorganisms. One of two mushroom farms showed 75% of disease incidence, the other 40% and National Institute of Agricultural Science and Technology(NIAST) 13% in the conventional growing method, whereas 12%, 14%, and 5% in the vinyl mulching cultivation method. Waterlogging caused mushroom bed worse, and Trichoderma spp. were infested on the conventional mushroom bed. Disease incidence investigated in other case was 25% to 30% in the conventional growing method, whereas 5 to 9% in the vinyl mulching cultivation method. Yields in conventional method were 6.5 to 7.2 $kg/m^2$ and those in vinyl mulching method were 7.6 to 8.1 $kg/m^2$. So it was suggested that vinyl mulching technique was good for prevention from disease and elevation of productivity.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.73-83
• /
• 2019

It is important to clarify the mechanisms of molten-fuel-pool sloshing behavior that might be encountered during a core disruptive accident of sodium-cooled fast reactors. In this study, motivated by acquiring some evidence for understanding the characteristics of this behavior at more realistic conditions, a number of experiments are newly performed by injecting nitrogen gas into a water pool with the accumulation of solid particles. To achieve comprehensive understanding, various parameters including particle bed height, particle size, density, shape, gas pressure along with the gas-injection duration, were employed. It is found that due to the different interaction mechanisms between solid particles and the gas bubble injected, three kinds of regimes, termed respectively as the bubble-impulsion dominant regime, the transitional regime and the bed-inertia dominant regime, could be identified. The performed analyses also suggest that under present conditions, all our experimental parameters employed can have noticeable impact on the regime transition and resultant sloshing intensity (e.g. maximum elevation of water level at pool peripheries). Knowledge and fundamental data from this work will be used for the future verifications of fast reactor severe accident codes in China.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.260-265
• /
• 2018

충적하천은 환경 변화에 따라 하천의 형태가 변화하고, 흐름 또한 변화하는 특성을 지닌다. 내성천은 대표적인 충적하천으로 최근 하도내 사주에 식생이 활착되고 육상화가 진행됨에 따라 식생사주 영역은 증가하고 흐름부의 하폭은 전체 하폭대비 매우 좁아진 상태이다. 따라서 하도내 흐름특성이 변화하여 저평수시 유속이 증가하고 지속적으로 하상침식이 발생하고 있다. 본 연구에서는 내성천에 위치하는 조제, 월포, 향석 관측소의 최근 10년간 강수량 및 수위자료 검토와 각 관측소 위치의 항공사진에 의한 하도내 식생활착 진행과정과 단면측량 자료를 바탕으로 횡단면 침퇴적 변화율을 검토하였다. 또한, 식생활착 및 하상침식의 영향이 수위-평균유속과 수위-유량관계의 변화 양상을 검토하였다. 검토결과 현재까지 내성천의 식생활착 및 하상침식의 원인은 지난 5년간 적은 강수량 영향으로 홍수시 하상소류력이 감소하여 흐름특성이 변화한 것이 주된 요인으로 판단된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.2.1-2.6
• /
• 2017

Background: All clinicians are aware of the difficulty of installing a dental implant in posterior maxilla because of proximate position of maxillary sinus, insufficient bone width, and lower bone density. This study is to examine which factors will make the implantation in the posterior maxilla more difficult, and which factors will affect the postoperative implant stability in this region. Methods: Five hundred seventy-three fixtures on the maxilla posterior were included for this study from all the patients who underwent an installation of the dental implant fixture from January 2010 to December 2014 at the Department of Oral and Maxillofacial Surgery in Pusan National University Dental Hospital (Yangsan, Korea). The postoperative implant stability quotient (ISQ) value, fixture diameter and length, presence of either bone graft or sinus lift, and graft material were included in the reviewed factors. The width and height of the bone bed was assessed via preoperative cone beam CT image analysis. The postoperative ISQ value was taken just before loading by using the OsstellTM $mentor^{(R)}$ (Integration Diagnostics AB, Gothenburg, Sweden). The t test and ANOVA methods were used in the statistical analysis of the data. Results: Mean ISQ of all the included data was 79.22. Higher initial bone height, larger fixture diameter, and longer fixture length were factors that influence the implant stability on the posterior edentulous maxilla. On the other hand, the initial bone width, bone graft and sinus elevation procedure, graft material, and approach method for sinus elevation showed no significant impact associated with the implant stability on the posterior edentulous maxilla. Conclusions: It is recommended to install the fixtures accurately in a larger diameter and longer length by performing bone graft and sinus elevation.

• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.879-887
• /
• 2022

In this study, we tried to confirm whether the mechanical sequential elevation method of the body pressure measuring bed actually induces segmental motion for each part of the spine. To this end, a lateral X-ray examination was performed, and it was confirmed that the sequential pressure device induces a step-wise segmentation of the spine by mechanically lifting each part of the spine vertically. Then, pain, walking ability, and depression scale were measured and analyzed in subjects who were aware of back pain. VAS(p<0.05) and ODI(p<0.05) for 10 days tended to decrease in average after bed use. In the gait ability test(p<0.05), as the number of times of bed use increased, the moving time in the test decreased and the moving distance increased. In addition, GSDDF(p<0.05) decreased after bed use. As a result, it was confirmed that the spinal segmentation caused by the heat and acupressure provided by the bed affected gait and depression as well as pain relief.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.17 no.2
• /
• pp.202-207
• /
• 1995

Chylous fistula is a rare complication occurring after radical neck dissection. Previous reports on neck dissection described an incidence of about 1% to 2%. We report a case of chylous fistula that occurred after radical neck dissection for squamous cell carcinoma of left lower gingiva and mandible in a 52-year-old man. We successfully managed the fistula by the following conservative measures : bed rest with head elevation, continuation of closed suction drainage, and dietary management to decrease the rate of chyle formation.