• Journal of Life Science
• /
• v.9 no.4
• /
• pp.460-465
• /
• 1999

In the giant freshwater prawn Macrobrachium rosenbergii, the paired testes were united by the testes bridge in a H-shape. During mating male discharged two hemispermtophores from right and left genital pore and they were joined and formed a compound spermatophore in peach shape. Hemispermatophore was considered to be produced at proximal and middle vas deferens region. The compound spermatophore consisted of an eosinophilic inner matrix, a basophilic outer matrix and paired sperm mass burried in the basophilic matrix. The size of compound spermatophore was 6.4∼ 9.3 mm in length and 2.4∼5.1 mm in width regardless of carapace length. After the spermatophore was deposited on female's ventral sternum behind of 5th pereiopod, it was moved to the ventral surface of 3rd and 4th pereiopods by means of the beating of male's 1st and 2nd pleopods.

• Journal of Chest Surgery
• /
• v.21 no.3
• /
• pp.583-587
• /
• 1988

Bilateral coronary artery-pulmonary artery fistula is very uncommon congenital heart disease which occupy small percentage of all coronary arterio-venous fistulas. We experienced a case who was 52 years old female with bilateral coronary artery-pulmonary artery fistula. She complained exertional dyspnea k angina[coronary steal syndrome]. On physical examination, any cardiac murmur was not audible. There was no 0y step-up in right heart catheterization. But selective coronary angiography revealed tortuous aberrant vessels which originated from the canal branch of the right coronary artery k the left anterior descending coronary artery. Both aberrant vessels traversed the right ventricular outflow tract, and conjoined just proximal the pulmonic annulus and drained into the main pulmonary artery. The operation was performed under the extracorporeal circulation with beating heart. The procedures were suture-ligation of the draining orifice in main pulmonary artery & the feeding vessels on the right ventricular outflow tract. Postoperatively her complaints were completely disappeared and the selective coronary angiography revealed no left-to-right shunt.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.1
• /
• pp.58-64
• /
• 2001

This study is to examine the emission quantity of $CO_2$ gas as the environmental load in office buildings. After the investigation of monthly consumption of each energy source(electricity and natural gas), it is analyzed that the $CO_2$ emission quantity of 34 office buildings surveyed is 22.4 kg-c/$m^2$-year, which consists of 17.5 kg-c/$m^2$-year by consurunlelectncif. and 4.9 kg-c/$m^2$-year by consuming natural gas. And the $CO_2$ emission quantity of each load in those buildings consists of 68% emitted by general electricity, 16% by cooling load and 16% by beating load. It is also proposed that the $CO_2$ emission quantity of cooling and heating load is profoundly pertinent to the variation of outdoor temperature.

• Tribology and Lubricants
• /
• v.13 no.4
• /
• pp.53-59
• /
• 1997

The camshaft locus at camshaft beating in a direct acting OHC valve train system has been investigated using the transient method. Forces applied to the camsfiaft are composed of two components, one is the transfer force between the cam and the tappet, the other is the frictional force. These forces have been calculated using the lumped mass model and the elastohydrodynamic lubrication theory. The alternating direction implicit method has been used for the numerical analysis of Reynolds equation, and 4th order Runge-Kutta method has been used for the transient journal locus analysis. The effects of various load conditions are presented in the form of journal locus. As a result of the analysis, it has been found that camshaft bearings were mainly in the hydrodynamic lubrication condition.

• Tribology and Lubricants
• /
• v.12 no.3
• /
• pp.92-99
• /
• 1996

Energy-efficient contrarotating propeller systems have been recently reviewed as one of alternative means in marine car-carrier applications. Contrarotating rotors preclude the usage of conventional plain journal bearings due to the lack of load carrying capacity. A new multi-recess hydrostatic contrarotating journal beating test facility has been designed and installed to test the static load carrying capacity. Measurements of flow rates and orbits have been investigated by testings on a overhung-type contrarotating rotor system which is supported by a hydrostatic journal bearing. Numerical results of static equilibria were compared with test results. Various contrarotating speed combinations, and supply pressure conditions were selected. The numerical predictions of orbit centers and flow rates are generally accurate.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.212-217
• /
• 1998

Reynolds equation, which describes behavior of fluid film in journal bearing, basically satisfies mass conservation. But, boundary conditions usually used with this equation, e.g. half Sommerfeld or Reynolds boundary conditions, cannot fulfill this natural law of conservation. In the case of connecting rod bearing, where applied load is dynamic and its magnitude is relatively large, such unrealistic boundary conditions have serious influence on calculation results, especially on lubricant flow rate or power dissipation which are important parameters in thermal analysis. Another important factor in the analysis of connecting rod bearing is elastic deformation of bearing support structure which is relatively flexible. In this paper, EHL analysis of connecting rod beating is performed using mass-conserving boundary condition. Elastic deformation of bearing support structure and application of mass-conserving boundary condition have significant effects on the performances of connecting rod bearing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.359-360
• /
• 2009

In this study, we propose a practical method to improve the clarity and the period of the beat in a Korean bell. Proper beating in vibration and sound is very important feature in Korean bell. An equivalent ring theory is applied and finite element analysis is performed to determine the condition of the asymmetry of the bell. The clearity and the period of the beat are improved by attaching a counter mass or decreasing local thickness. This paper shows that the improved the attaching a counter mass or decreasing local thickness. This paper of the beat are improved by attaching a counter mass or decreasing local thickness. This paper shows that the amount and position of the local variation for the required beat condition can be predicted by using the equivalent model, The predicted results are verified by the experiment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.72-72
• /
• 2010

The PV module company use variable process step and type. Especially soldering process is important, because crystalline cell can be bow by beating temperature. Most PV module company use hot air soldering type in the tabbing & string process. Although hot air type is used widely but this type is bound to influence on cell damage. So recently new way is introducing like a high current way. In this paper, we compare with characteristics of each soldering type and then conform a method to minimize solar cell deformation. Actually solar cell deformation show many difference by fix position and cooling time after soldering step.

• Journal of Industrial Technology
• /
• v.38 no.1
• /
• pp.1-7
• /
• 2018

This paper introduces the design, casting, and sound evaluation results of the Great Bell of 2018 Pyeongchang Winter Olympics. The Olympic Bell was manufactured to announce the opening of the successful Winter Olympics in the world with a grand sound. The bell was designed to the dynamic shape to give a grand and harmonious sound in consideration of the global sports festival. In this study, the performance of the beat making the sound magnificent and the harmony of the bell sound were quantitatively evaluated using acoustical factors. Beat maps were investigated to understand the directivity of the beating sound. The purpose of the research is to present the production technique of a traditional Korean bell that has a dynamic shape and a grand and harmonious sound.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.6
• /
• pp.68-75
• /
• 1997

In this study, to investigate vibration response of piping systems due to pulsation flow, a transfer matrix method is presented. Fluid-pipe interaction is formulated using wave equation for flow velocity and pressure, which depends on position and time. From the wave equation, transfer matrix is obtained. The dynamic responses of piping systems induced by pulsation flow appeared to depend upon fluctuation fluid velocity and pressure occurrnece from pulsation, and beating phenomena were observed near the resonance. Consequently, the dynamic behaviors of piping systems appeared to the same as response characteristics of the inside flow pattern of the pipe, and are determined by the inside fluid flow.