• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.136-144
• /
• 2010

Since most domestic apartment, built in bearing wall system limiting variability of space, in spite of its good durability, cannot accept life style change and is being wasted, dumped scraps of which cause environmental pollution and waste of resources. As a response for this, researches on sustainable housing, that is, 'long-life housing' which has high durability, and variability responding life style change of the resident are in progress in and out of country. Therefore, this article aims, in suggesting the various status appearing on apartment and the interior plan responding the problem, to research on the house plan in the future which can be used continuously instead consuming type of apartment shortly used and discarded with understanding of long-life housing developed in foreign countries, and grasping the factors of application plan. Various reports from previous researches were comparatively analyzed and the studies on the characteristics, the real examples and the types of the surfaces were performed on the experimental model of long-life housing and similar residential surfaces to find the concept to be applied to Long-Life Housing and the introduction method of such concept. This article tries not only to prevent 'scarp and build', the serious cause of environmental pollution, but also to be basic materials for interior construction plan afterwards through 'long-life housing interior design plan' as the new conception which can accept life style and life cycle change.

• Structural Engineering and Mechanics
• /
• v.59 no.3
• /
• pp.387-401
• /
• 2016

This paper takes a half-through steel truss arch bridge as an example. A seismic analysis is conducted with nonlinear finite element method. Contrast models are established to discuss the effect of simplified method for main girder on the accuracy of the result. The influence of seismic wave direction and wave-passage on seismic behaviors are analysed as well as the superstructure and arch ring interaction which is mostly related with the supported bearings and wind resistant springs. In the end, the application of cable-sliding aseismic devices is discussed to put forward a layout principle. The main conclusions include: (1) The seismic response isn't too distinctive with the simplified method of main girder. Generally speaking, the grillage method is recommended. (2) Under seismic input from different directions, arch foot is usually the mostly dangerous section. (3) Vertical wave input and horizontal wave-passage greatly influence the seismic responses of arch ring, significantly increasing that of midspan. (4) The superstructure interaction has an obvious impact on the seismic performance. Half-through arch bridges with long spandrel columns fixed has a less response than those with short ones fixed. And a large stiffness of wind resistant spring makes the the seismic responses of arch ring larger. (5) A good isolation effectiveness for half-through arch bridge can be achieved by a reasonable arrangement of CSFABs.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.241-247
• /
• 2018

Deep-sea fishing vessel No. 501 Oryong was fully flooded through its openings and sunk to the bottom of the sea due to the very rough sea weather on the way of evasion after a fishing operation in the Bearing Sea. As a result, many crew members died and/or were missing. In this study, a full-scale ship flooding and sinking simulation was conducted, and the sinking process was analyzed for the precise and scientific investigation of the sinking accident using a highly advanced Modeling & Simulation (M&S) system of the Fluid-Structure Interaction (FSI) analysis technique. To objectively secure the weather and sea states during the sinking accident in the Bering Sea, time-based wind and wave simulation at the region of the sinking accident was conducted and analyzed, and the weather and sea states were realized by simulating the irregular strong wave and wind spectrums. Simulation scenarios were developed and full-scale ship and fluid (air & seawater) modeling was performed for the flooding sinking simulation, by investigating the hull form, structural arrangement & weight distribution, and exterior inflow openings and interior flooding paths through its drawings, and by estimating the main tank capacities and their loading status. It was confirmed that the flooding and sinking accident was slightly different from a general capsize and sinking accident according to the simple loss of stability.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.79-85
• /
• 2009

Dowel-bar in the jointed concrete pavement has been designed and constructed by Foreign standard and experience in Korea. Timoshenko solution was evaluated for dowel bar design. However, various assumptions, Timoshenko solution evaluated only single dowel bar. Therefore, This study object is evaluated the guide line dowel size and arrangement that using the 3Dimensional Finite Element Method. Dowel bar behavior, Timoshenko solution and 3D FEM estimated used result. Dowel allowable stress and Friberg bearing stress estimated using result. The effects of Dowel Group Action were analyzed using Timoshenko range and Friberg range and 3D FEM.

• Journal of architectural history
• /
• v.28 no.3
• /
• pp.7-18
• /
• 2019

This study analyzed "Bukgwol Dohyeong (Drawing Plans for the Northern Section of Gyeongbokgung Palace)", which is an important source material for the restoration of the palace, by applying Paltaekron, the geomantic principle of bearings, in order to clarify the building layout principle of Gyeongbokgung Palace. Gyeongbokgung Palace shows the typical geographical conditions that meet the principle of Baesan Imsu (mountain in the back and water in the front) which takes Baegaksan Mountain as the main mountain and the overall layout of the buildings that meet the principle of 'Jeonchak Hugwan (narrow in the front and broad toward inside)' by using the natural topography that meets the principle of 'Jeonjeo Hugo (low in the front and higher toward back).' It is estimated that this layout and arrangement must have been led by geomantic principle of bearings. The analysis of the building layout plan of Gyeongbokgung Palace in the late Joseon Dynasty Period suggests the application of two methods: one is to divide central area from Gwanghwamun Gate to Geoncheongung Hall into eight layers and the other is to apply the bearings of the Eight Trigrams based on the building that becomes the center. As a result, the gate, main hall, and kitchen of all major buildings where the royal family lived are located in the auspicious bearings according to the geomantic principle of bearings while the spaces where people other than the royal family such as those who served the royal family and the officials operated in the palace or the hall that enshrines the ancestors such as Taewonjeong Hall are located in the ominous bearings. Therefore, the buildings of Gyeongbokgung Palace are arranged based on the geomantic principle of bearings.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.955-963
• /
• 2006

As the geometrical characteristic of the curved bridge, the seismic response of curved bridges are different from straight bridges. This study analyzed the seismic response of the curved bridges considering diverse factors such as radius of curvature, direction of seismic load and support condition. The improved simple modeling of the curved bridge for seismic analysis is proposed, and it is compared with the detail modeling in order to verify the simple modeling. Three simply supported curved bridges and six 3-span continuous bridges are selected for seismic analysis. The behavior of curved bridges are evaluated in terms of the displacement and the force at supports and piers under seismic load applied in various directions. The results of this study show that upward reaction force may appear in simply supported curved bridge under seismic load. And continuous curved bridges are affected by the direction of the seismic load.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.122-141
• /
• 2019

This study aimed to provide new interpretations of the ceramics excavated from the archaeological site of the royal palace of Goryeo (918~1392), where only limited access was permitted due to its location in Gaeseong, North Korea. The interpretations were based on the existing understanding of the arrangement of the palace buildings at the site and historical records. The study of the general aspects of the celadons discovered during eight excavations at the Goryeo Palace site in Gaeseong revealed that most of the vessels found at the site were produced during the early and middle phases of the Goryeo dynasty. The study involved classifying the celadons bearing inscribed texts and symbols into 18 different types according to their characteristic features and periods of production. The inscribed celadons have provided detailed information of the site where they were found, thereby making it possible to make strong presumptions about the date of construction, function, and status of the building in the palace connected with the discoveries. The excavations from the Goryeo Palace site and related historical literature suggest that the celadons bearing the inscription "Sojeon (燒錢)" were used during the first half of the 13th century, although the existing view had been that they were used during the second half of the century. This new conclusion is based on the use of the symbols ${\circ}$ and ${\odot}$, the celadons found together with the Sojeon-inscribed celadons, the date of the celadons bearing the inscription "Seong (成)," and the location of their discovery behind the site of Seongyeongjeon (aka Hoegyeongjeon) Hall, which had been one of the main palace buildings. The Taoist rituals performed for the safety of the Goryeo dynasty were largely held at Ganganjeon (aka Daegwanjeon) Hall in the western part of the royal palace during the second half of the 13th century. It was mostly in the first half of the 13th century just before the transfer of the Goryeo government from Gaeseong to Ganghwa (1232~1270) that the Taoist rituals were held at the location near Seongyeongjeon Hall, where archaeologists found the Sojeon-inscribed celadons. Therefore, the large number of celadon cups with holders, including those inscribed with Sojeon, discovered during the eighth excavation of the palace site suggests that they were used for the rituals held at Seongyeongjeon Hall during the first half of the 13th century.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.451-466
• /
• 2017

Deep-sea fishing vessel No. 501 Oryong was fully flooded through its openings and sunk to the bottom of the sea due to the very rough sea weather on the way of evasion after a fishing operation in the Bearing Sea. As a result, many crew members died and/or were missing. In this study, a full-scale ship flooding sinking simulation was conducted, and the sinking process was analyzed for the precise and scientific investigation of the sinking accident using highly advanced Modeling & Simulation (M&S) system of Fluid-Structure Interaction (FSI) analysis technique. To objectively secure the weather and sea states during the sinking accident in the Bering Sea, time-based wind and wave simulation at the region of the sinking accident was carried out and analyzed, and the weather and sea states were realized by simulating the irregular strong wave and wind spectrums. Simulation scenarios were developed and full-scale ship and fluid (air & seawater) modeling was performed for the flooding sinking simulation, by investigating the hull form, structural arrangement & weight distribution, and exterior inflow openings and interior flooding paths through its drawings, and by estimating the main tank capacities and their loading status. It was confirmed that the flooding and sinking accident was slightly different from a general capsize and sinking accident according to the simple loss of stability.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.58-66
• /
• 2009

The thermotropic liquid crystalline behavior of the homologous series of cellulose tri[4-{4'-(nitrophenylazo) phenoxycarbonyl}] alkanoates (NACEn, n=2$\sim$8, 10, the number of methylene units in the spacer) have been investigated. All of the homologoues formed monotropic nematic phases. The isotropic-nematic transition temperature ($T_{iN}$) decreased when n is increased up to 7, but it became almost constant when n is more than 7. The plot of transition entropy at $T_{iN}$ against n had a sharp negative inflection at n=7. The sharp change at n=7 may be attributed to the difference in arrangement of the side groups. The melting temperature ($T_m$) and associated entropy change at $T_m$, in contrast with $T_{iN}$ and associated entropy change at $T_{iN}$, exhibited a distinct odd-even effect, suggesting that the average shape of the side chains in the crystalline phase is different from that in the nematic phase. The thermal stability and degree of order of the nematic phase observed for NACEn were significantly different from those reported for the homologous series of side-chain and combined type liquid crystal polymers bearing azobenzene or biphenyl units in the side chains. The results were discussed in terms of the differences in the chemical structure, the flexibility of the main chain, the mode of chemical linkage of the side group with the main chain, and the number of the mesogenic units per repeating unit.

• Parasites, Hosts and Diseases
• /
• v.30 no.2
• /
• pp.65-74
• /
• 1992

The tegumental ultrastructure of juvenile and adult Echinostoma cinetorchis (Trematoda: Echinostomatidae) was observed by scanning electron microscopy. Three-day (juvenile) and 16-day (adult) worms were harvested from rats (Sprague-Dawley) experimentally fed the metacercariae from the laboratory-infected fresh water snail, Hippeutis cantori. The worms were fifed with 2.5% glutaraldehyde, processed routinely, and observed by an ISI Korea DS-130 scanning electron microscope. The 3-day old juvenile worms were elongated and ventrally curved, with their ventral sucker near the anterior two-fifths of the body. The head crown was bearing 37∼38 collar spines arranged in a zigzag pattern. The lips of the oral and ventral suckers had 8 and 5 type II sensory papillae respectively, and bewteen the spines, a few type III papillae were observed. Tongue or spade-shape spines were distributed anteriorly to the ventral sucker, whereas peg-like spines were distributed posteriorly and became sparse toward the posterior body. The spines of the dorsal surface were similar to those of the ventral surface. The 16-day old adults were leaf-like, and their oral and ventral suckers were located very closely. Aspinous head crown, oral and ventral suckers had type II and type III sensory papillae, and numerous type I papillae were distributed on the tegument anterior to the ventral sucker. Scale-like spines, with broad base and round tip, were distributed densely on the tegument anterior to the ventral sucker but they became sparse posteriorly. At the dorsal surface, spines were observed at times only at the anterior body. The results showed that the tegument of E. cinetorchis is similar to that of other echinostomes, but differs in the number and arrangement of collar spines, shape and distribution of tegumenal spines, and type and distribution of sensory papillae.