• 제목/요약/키워드: Bearing Number

검색결과 646건 처리시간 0.028초

항타말뚝의 지지력 예측을 위한 최적의 인공신경망모델에 관한 연구 (A Study on Optimized Artificial Neural Network Model for the Prediction of Bearing Capacity of Driven Piles)

  • 박현일;석정우;황대진;조천환
    • 한국지반공학회논문집
    • /
    • 제22권6호
    • /
    • pp.15-26
    • /
    • 2006
  • 말뚝의 지지력과 거동을 예측하기 위하여 다양한 연구들이 수행되었음에도 불구하고, 메커니즘에 대한 전반적인 이해가 아직까지 미흡한 실정이다. 이는 많은 인자들이 서로 복잡한 연관성을 맺으며 말뚝의 거동에 영향을 미치기 때문이다. 따라서 지반조건과 말뚝조건 및 항타조건 등 과 관련된 많은 인자들 가운데 지지력에 중요한 영향을 미치는 인자들을 도출하기 어려우며, 또한 인자들 간의 복잡한 연관성을 지지력 공식에 적합하게 고려하기란 매우 어렵다. 본 연구에서는 항타말뚝들에 대한 동재하시험으로부터 선단 및 주면 지지력을 포함한 지지력을 예측하기 위하여 인공신경망이 적용되었다. 첫째로, 신경망 모델링에 근거한 민감도 분석를 통하여 지지력에 대한 각 영향인자들의 영향이 검토되었다. 둘째로, 지지력 예측을 위한 최적의 인공신경망 모델을 도출하기 위하여 인공신경망과 유전자 알고리즘으로 구성된 설계기법이 적용되었다. 이를 통해 토사지반에 관입된 항타말뚝의 지지력을 산정할 수 있는 최적의 인공신경망 모델을 제안하고자 하였다. 사용된 설계기법을 통하여 적합한 입력층 조합, 은닉층 노드수과 각 층 사이의 연결구조를 도출하였다. 도출된 인공신경망 모델을 적용함으로써 항타말뚝의 지지력을 간단하며 신뢰성 있게 예측할 수 있음을 알 수 있다.

낙동강 삼각주에 항타된 PHC말뚝의 지지력을 위한 재하시험과 지지력 공식의 비교연구 (Comparative Study between Design Methods and Pile Load Tests for Bearing Capacity of Driven PHC Piles in the Nakdong River Delta)

  • ;정성교;김성렬;정진교
    • 한국지반공학회논문집
    • /
    • 제23권3호
    • /
    • pp.61-75
    • /
    • 2007
  • 우리나라에서는 암반 및 자갈층과 같은 단단한 층 내에 깊은 기초를 매입하는 것이 일반적이다. 그러나 Chaophraya(Bangkok)와 Mississippi강 삼각주에서 실시되고 있는 것과 같이, 대심도 낙동강 삼각주 퇴적토에서도 말뚝의 지지층으로써 중간 깊이에 위치하는 모래 및 모래질 자갈층을 고려할 필요가 있다. 이 연구는 이 지역에서 PHC 말뚝을 요구하는 깊이까지 항타할 때, 말뚝의 지지력을 위한 적절한 평가법을 찾고자 하였다. 지반조사는 두 현장의 5개소에서 실시되었다. 말뚝의 지지력은 지반조사 결과를 이용하고 CPT에 근거한 평가법과 여러 다른 해석법을 적용하여 계산되었으며, 상호 비교가 이루어 졌다. 항타된 5개의 말뚝에 대해 매입된 전 깊이에 걸쳐 잘 알려진 PDA시험이 체계적으로 수행되었다. 여러 평가법에 의하여 계산된 지지력은 PDA 및 정재하 시험결과와 함께 비교되었다. 그 결과, 주면마찰력은 set-up 효과에 따라 지배적으로 영향을 받으며, 장시간 경과 후에는 $\beta$법에 의한 결과와 좋은 일치를 보였다. 선단 지지력은 과소평가되는 PDA시험 보다는 정재하시험결과에 근거하여 적절한 평가법을 선정하였다. 최종적으로, CPT결과를 이용하여 이 지역에 적합한 지지력의 평가법을 도출하였다.

Developmental Morphology of Osmundea crispa (Ceramiales, Rhodophyta) from California

  • Nam Ki Wan;Choi Han Gil
    • Fisheries and Aquatic Sciences
    • /
    • 제2권1호
    • /
    • pp.25-31
    • /
    • 1999
  • Developmental morphology of the red alga, Osmundea crispa (Hollenberg) Nam from California was studied on the basis of liquid-preserved and herbarium specimens. Vegetative axial segment of the species produces two pericentral cells and one trichoblast. Spermatangial filaments (branches) are derived from apical and epidermal cells in pocket-shaped apical pit with an ostiole-like upper opening. Procarp-bearing segment of female trichoblast produces five pericentral cells, of which the fifth functions as supporting cell of carpogonial branch. Tetrasporangial production occurs in random epidermal cells in apical pit of branchlets, and two presporangial cover cells show parallel arrangement to stichidial axis. As this vegetative and reproductive development is included in the generic delineation of Osmundea Stackhouse, O. crispa among the known Osmundea species is characterized by habit forming compact cushion-like clump with angular to terete thallus. It is also distinguished from O. hybrida (AP. de Candolle) Nam without the compressed thallus by the number of pericentral cells in procarp-bearing segment and shape of spermatangial pit. Taxonomic implication of the shape of spermatangial pit is also included.

  • PDF

지오그리드로 보강된 연약지반 위에 위치한 연속기초의 극한 지지력 (Bearing Capacity of Strip Footing on Geogrid-Reinforced Soft Ground)

  • 유충식;신승우
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1994년도 가을 학술발표회 논문집
    • /
    • pp.169-174
    • /
    • 1994
  • This paper presents the results of a parametric study on the bearing capacity behavior of a footing located above geogrid-reinforced ground using the finite element method of analysis. A wide range of boundary conditions were analyzed, with varing geogrid design parameters such as depth of geogrid layer, length and siffness of geogrid, and number of geogrid layer, were analyzed. Based on the results of analysis, the optimum geogrid design parameters were determined, which maximize the reinforcing effect of geogrid reinforcement for a given conidition. Furthermore, the mechanistic behavior of a geogrid-reinforced ground subjected to a footing load was discussed using the results of analysis such as stress distribution, propagation of plastic yielding, displacement vector among others.

  • PDF

지반보강재로서 폐타이어의 보강 효과 (Reinforcing Effect of Waste Tires As Reinforcement Material)

  • 윤여원;최경순;천성한
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.827-832
    • /
    • 2003
  • This study presented the reinforcing effect of sands by using newly devised 3D Tirecell. Plate loading tests for sand were conducted for different relative density and number of reinforced layers. From the tests, the ultimate bearing capacity of reinforced sand increased with increasing relative densities. The effect of reinforced layers with 0.4B interval is limited to 2 layers and further reinforcing effects can not be obtained beyond 3 layers. Especially the bearing capacity increased remarkably at 1 layer of Tirecell reinforcement and the degree of increase was small for 1 layer to 2 layers increase of reinforcement. Test results show that the reinforcing effect of Tirecell is prominent compared with commercial geocell in the literature.

  • PDF

헤링본 공기 저널 베어링의 강성 및 감쇠 특성에 관한 연구 (Stiffness and Damping Characteristics of Herringbone Grooved Air Journal Bearings)

  • 박상신
    • Tribology and Lubricants
    • /
    • 제26권5호
    • /
    • pp.283-290
    • /
    • 2010
  • In this study, the stiffness and damping coefficients of herringbone grooved air journal bearings are studied. A generalized coordinate transformation method to handle the complex geometry of incompressible fluid bearing is modified for compressible fluid. The modified equations are discretized by the base of finite difference method. A new computer program using Visual C++ language is developed. The load carrying capacity and stiffness and damping coefficients are calculated according to the design parameters like groove depth or the number of grooves and compared to that of plain air journal bearings.

터빈 발전기 회전자 권선의 층간단락 분석 (Analysis of Shorted Turns in Turbine Generator Rotor Windings)

  • 김희동;김병래;최형주
    • 전기학회논문지
    • /
    • 제60권8호
    • /
    • pp.1555-1559
    • /
    • 2011
  • Turbine generator(13.8 kV, 137.5 MW) has high bearing vibration at rotation speed. Shorted turns in generator rotor windings have strong correlation with increased field current which is thus related to increase in bearing vibration. The recurrent surge oscillograph (RSO) test is performed on the rotor winding in turbine generator to detect shorted turns. The result of the RSO test indicates that shorted turns of rotor winding are generated in two locations. The RSO test was capable of identifying the presence, number, and location of shorted turns in generator rotor windings.

직접해법에 의한 공기 윤활 틸팅 패드 저어널 베어링의 윤활 해석에 관한 연구

  • 김인식;황명
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 춘계학술대회 논문집
    • /
    • pp.121-126
    • /
    • 1993
  • Tiling pad journal bearing that has high stability is analyzed about air-lubricated bearing that is usually used to need high precision by using the Direct analysis. The pressure that supports the shaft is occured by the differences between the shaft and pads radii of curvatures. So the characteristics of load capacity for their variable values is important. In this paper the load capacity is compared with some the eccentricity ratio values of0.1, 0.2, 0.5, 0.8. The large load capacity comes from large eccentricity ratio, highbearing number and high preload. But if the preload become high too much, then the shaft makes contact with pads.

벽식구조 표준시험동에서 중량충격음장에 관한 연구 (Investigation of the heavy-weight floor impact sound field in a testing building with bearing wall structure)

  • 유승엽;이신영;전진용
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.969-973
    • /
    • 2007
  • The heavy-weight floor impact sound field of the receiving room in a testing building with bearing wall structure was investigated using bang machine and impact ball. The sound field was investigated through the impact sound pressure level distribution by the field measurement and computational analysis. Predicted sound field using the computational analysis agree with measurement result in the low frequency band. Result shows that standard deviations of the single number rating value are about 2dB in each impact source. Particularly, impact sound pressure level at 120cm height in 63Hz octave band was 5dB lower than spatial averaging value. It was found that receiving positions in the ministry of construction and transportation notice should be reconsidered.

  • PDF

Antitumor Activity of Chitosan Oligosaccharides Produced in Ultrafiltration Membrane Reactor System

  • Jeon, You-Jin;Kim, Se-Kwon
    • Journal of Microbiology and Biotechnology
    • /
    • 제12권3호
    • /
    • pp.503-507
    • /
    • 2002
  • Chitosan oligosaccharides (COSs) were prepared and fractionated into three groups of COS [a high molecular weight COS (HMWCOS), medium molecular weight COS (LMWCOS), and low molecular weight COS (LMWCOS)] according to their molecular weight, using an ultrafiltration membrane enzymatic bioreactor designed earlier [8]. Antitumor activity of these COSs was then examined against Sarcoma 180 solid (S180) or Uterine cervix carcinoma No. 14 (Ul4) tumor cell-bearing mice. Among these COSs, MMWCOS with molecular weight range from 1.5 to 5.5 kDa effectively inhibited the growth of both tumor cells in the mice. In addition, the administration of MMWCOS resulted in increased thymus weight among lymphoid organs. The mice treated with MMWCOS showed improved survival rate and larger number of survivors after 40 days of feeding. The most effective of MMWCOS far antitumor activity in the S180- or U14-bearing mice was 20 mg/kg/day or more.