International Journal of Precision Engineering and Manufacturing
/
제8권2호
/
pp.26-31
/
2007
A novel scanning probe measurement system was developed to enable precise profile measurements of microaspheric surfaces. An air-bearing stylus with a microprobe was used to perform the surface profile scanning. The new system worked in a contact mode and had the capability of measuring micro-aspheric surfaces with large tilt angles and complex profiles. Due to limitations resulting from the contact mode, such as possible damage caused by the contact force and lateral resolution restrictions from the curvature of the probe tip, several system improvements were implemented. An air bearing was used to suspend the shaft of the probe to reduce the contact force, enabling fine adjustments of the contact force by changing the air pressure. The movement of the shaft was measured by a linear encoder with a scale attached to the actual shaft to avoid Abbe errors. A $50-{\mu}m-diameter$ glass sphere was bonded to the tip of the probe to improve the lateral resolution of the system. The maximum contact force of the probe was 10 mN. The shaft was capable of holding the probe continuously if the contact force was less than 40 mN, and the resolution of the probe could be as high as 10 nm, The performance of the new scanning probe measurement system was verified by experimental data.
Purpose : The purpose of this study was to find out of an effect of forward, backward walking using partial weight bearing on walking of the patient with incomplete spinal cord injury. Methods : The average age, and the term of being sick of 6 patients who were selected as the subjects with incomplete spinal cord injury and who received medical attention in the National Rehabilitation Hospital, was 50.3 years old, and 10.7 months, and those were also the patients that were classified as ASIA-C or D by ASIA. The forward, backward walking using a partial weight bearing system as the research method, took total 6 weeks, 3 days per week, 3 times per day, total 45 minutes for each time(15 minutes for a time, 5 minutes for a breathing time), and the 15 minutes was used for forward walking 7.30 minutes, backward walking for 7.30 minutes, to find out before and after the test of WISCI, PCI, Walking Speed, Motor Score of Lower Limbs for the selected patients with incomplete spinal cord injury. Results : The result was showed WISCI from 17 points to 17 points that is, no change occurred at all, and PCI from $161.01{\pm}103.06$ to $74.97{\pm}58.19$, some amount of reduction that is not statistically significant(p<.05). Regarding walking speed, it increased from $24{\pm}.07m/sec$ to. $61{\pm}.35m/sec$, that is statistically significant(p<.05), and motor score of lower limbs showed statistically significant increase like from $33.17{\pm}7.08$ to $37{\pm}5.14$(P<.05). Conclusion : The 4 evaluation categories seem to have shown differences due to an insufficient number of subjects, and short test term, and it seems the more diverse task-oriented walking exercises should be studied in the coming days.
This study was implemented to verify the feasibility of motor function recovery and the appropriate period for therapy. The research began with spinal laminectomy of 40 white rats of Sprague-Dawley breed and induced them spinal crush injury. Following results were obtained by using the modified Tarlov test (MTT), Basso, Beattle, Bresnahan locomotor rating scale (EBB scale) and modified inclined plate test (MIPT). First, the measurement using the MTT confirm that the most severe aggravation and degeneration of functions are observed two days after induced injury, and no sign of neuromotor function recovery. Second, better scores were achieved by open-ground movement group on BBB locomotor rating scale test, and weight-bearing on inclined plate group show better performance on MIPT. Third, both BBB and MIPT scale manifested the peak of motor function recovery during 16th day after the injury and turn into gradual recovery gradient during 16th to 24th. Fourth, the control group showed functional recovery, however, the level of recovery was less significant when compared with group open-ground movement group and weight-bearing on inclined plate group. Hence, it was clearly manifested that the lumbar region of the spinal cord had shown the best performance when its functions were measured after the execution of specific physical training; therefore it indicated the possibility of learning specific task even in damaged lumbar regions. Thus it is expected to come out with better and more effective functional recovery if concentrated physical therapy was applied starting 4 days after the injury till 16 days, which is the period of the most active recovery.
대심도 연약지반에 설치되는 말뚝은 말뚝의 길이가 길어져 지반지지력이 크므로 극한 지지력의 확인이 힘들고, 부마찰력에 의해 큰 잔류하중이 발생하기 때문에 하중전이시험을 수행하더라도 정확한 하중전이곡선을 산정하기 어렵다. 본 연구에서는 연약지반에 설치된 PHC 항타 말뚝을 대상으로 선단지지력과 주면마찰력을 분리측정할 수 있고 극한 지지력을 확인하기 용이한 하중전이 양방향 재하시험을 수행하였다. 말뚝설치 직후부터 말뚝변형률을 지속적으로 계측하여 잔류하중을 결정하였다. 잔류하중의 영향을 고려하여 참지지력과 참 하중-변위 곡선을 분석하였다. 이를 바탕으로 잔류하중이 포함된 주면마찰력에 대한 하중-변위 거동모형을 제안하였다. 결과적으로, 점토지반에 설치되는 장대말뚝의 재하실험 결과에 대한 정확한 분석을 위해서는 잔류하중을 고려하여야 한다는 것을 입증하였다.
버킷기초에 작용하는 수직하중의 일부는 내부 흙을 통해 저면으로 나머지는 스커트 외주면과 지반 사이로 전달된다. 사질토 지반에 설치된 버킷기초의 설계를 위해서는 수직 하중전이 특성을 명확하게 규명해야 하나 아직 이에 대한 연구가 수행되지 않았다. 본 연구에서는 2차원 축대칭 유한요소해석을 수행하여 사질토 지반에 설치된 버킷기초의 수직하중에 대한 지반의 응답을 계산하였다. 극한 상태에서 버킷기초의 선단지지력은 얕은기초의 지지력보다 크며 주면마찰력은 말뚝의 설계식에 비하여 작은 것으로 나타났다. 선단지지력은 스커트 외주면에 작용하는 전단응력이 파괴면을 아래로 밀어내어 파괴면이 확장되기 때문에 얕은기초에 비하여 큰 것으로 분석되었다. 반면 주면마찰력은 침하가 진행되면서 버킷기초 하부의 흙이 수평방향으로 밀려 이동하면서 스커트에 작용하는 수평응력이 감소하기 때문에 작은 것으로 나타났다. 버킷기초의 극한지지력은 얕은기초의 선단지지력과 주면마찰력 설계식을 합한 값보다 큰 것으로 계산되었다. 이는 주면마찰력은 설계식보다 작지만 크기가 선단지지력에 비하여 매우 작아 지지력에 큰 영향을 미치지 않는 반면 선단지지력은 주면마찰력에 비하여 증가폭이 크기 때문이다.
본 연구에서는 항타말뚝과 비교한 현장타설말뚝의 극한지지력을 하중전이함수를 적용하여 예측하였으며 이를 토대로 항타말뚝과 비교한 현장타설말뚝의 지지력을 현장재하시험 결과와 비교, 분석하였다. 비교, 분석은 하중전이함수들 중 응력 연화를 고려한 방법, 쌍곡선 함수법 및 탄소성 방법을 대표하는 Vijayvergiya의 방법, Castelli의 방법 및 2중 직선법을 적용하여 지반 종류에 따라 현장타설말뚝의 하중-변위관계를 산정하였다. 본 연구 결과 동일한 지반에 설치된 항타말뚝과 현장타설말뚝의 극한지지력은 총 주면마찰력의 차이로 인하여 항타말뚝이 더 큰 것으로 나타났으며 이러한 차이는 점토질 지반에서 보다는 모래질 지반에서 더 크게 나타났다. 같은 지지력을 발현하기 위해 필요한 말뚝 두부에서의 변위량은 항타말뚝보다는 현장타설말뚝에서 더 크게 나타났으며 현장타설말뚝이 극한지지력을 발현하기 위해 필요한 변위량과 이와 같은 크기의 지지력을 발현하는데 필요한 항타말뚝의 변위량과의 차이는 모래질 지반에서 가장 크게 나타났다. 현장타설말뚝과 항타말뚝의 말뚝직경과 길이의 비(LID)의 변화에 따른 극한지지력의 차이는 점토질 지반의 경우 일정한 것으로 나타났으나 모래질 지반에서는 LID의 비가 증가할수록 극한지지력의 차이가 증가하는 것으로 나타났다.
지금까지의 지진 관련 연구는 주로 교량 받침 자체의 성능개선이 주요 관심 과제였으나, 본 논문에서는 받침 종류에 따라 교량에 미치는 전반적인 지진거동 특성을 분석하고 교량 공사비에 미치는 영향을 검토하였다. 이를 위해 실무에서 많이 적용되는 PSC I형 교량에 대해 교량받침의 종류를 변화시키며 교각 높이를 매개변수로 하여 상시 및 지진해석을 수행하였다. 특히 지진해석을 통해 산출한 단면력을 고려하여 PSC I형 교량받침의 변위, 지진하중에 의한 교각 기둥의 직경, 상부여유 간격 등의 변화를 분석하였다. 고교각인 경우 탄성받침보다는 지진격리장치를 적용하는 것이 지진에 의한 상부구조의 이동량을 줄여 신축이음장치의 규격을 줄일 수 있으므로 차량의 주행성 및 교량의 유지관리 측면에서 바람직 할 것으로 판단되었고, 교량 하부 구조 단면이 축소되어 미관개선 및 경제성 개선의 효과가 있는 것으로 분석되었다. 결국, PSC I형 교량받침 설계시 일률적으로 탄성받침을 적용하는 것보다 정밀한 내진해석을 통해 지진격리장치를 적용하는 것이 구조적정성 측면 및 공사비 측면에서 타당하다는 결론에 도달하였다.
The hub of weight bearing in the human body for both static and dynamic activities is the lumbopelvic region. It is a key region of extraordinary stability, since the trunk and ground forces converage in this region. The two sacroiliac joints form an integral part of this lumbopelvic unit. Considerable effort has been expended to study and quantify the normal range of movement of the sacroiliac joints Mitchell suggests that the ilium rotates in a posterior direction at heel strike and progresses in an anterior direction as the individual passes through the stance phase. The overall key appears to lie in determining the weight-bearing pattern of the sacroiliac (lumbopelvic) region from above and below that results in the familiar pain of sacroiliac dysfunction, assessing the status of the injured tissues, and intervening with the proper treatment protocols that maximize the body's healing processes. The purpose of this chapter is to provide a comprehensive overview of the sacroiliac joint's tissues and biomechanics, as well as concepts of evaluation and treatment. This overview is aimed at assisting the clinician in identifying the forces that are potentially destructive to the lumbopelvic tissues.
This paper presents a new method for roller design of IRB(isolation roller bearing) seismic isolation device using experimental evaluation. Three layered plate is adopted for the IRB in which the upper plate is placed on x direction and the lower plate is placed on y direction. The rollers placed in each plate make a plate movement. The roller is then optimally designed using variable geometric conditions. Stress distribution depends on the diameter and length of the roller and hence this is used for the determination of optimal geometry of the roller. In the experimental evaluation, it is observed that stress concentration at the end sides of roller is decreased and geometric coefficients depend on crowning dimension. In addition, in order to determine optimal design parameters of the roller the plastic deformation and friction are experimentally identified.
Centrifugal casting is suitable for producing hollow-products using centrifugal force. Bush type metal bearings are the key parts that facilitate the rotational movement of various machinery. Metal bearings produced by conventional centrifugal casting machines show rotational imbalance. Therefore, after injecting a large amount of material, the product's precision is secured in the secondary processing. Rotational imbalance is caused by the force acting on the rotary disc plate. In order to minimize rotational imbalance, NASTRAN was used for the optimal design and structural analysis. It was concluded that the rotating plate of the conventional centrifugal casting machine should be prevented from tilting. For this purpose, the location & thickness of the stiffeners were obtained through the optimum design. In the conventional centrifugal casting machine, both ends of the product are lower in temperature than the center part, so internal stress occurs. This solves this problem by inserting a heating coil into the rotating plate.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.