• 대한조선학회논문집
• /
• 제50권3호
• /
• pp.190-198
• /
• 2013

In order to predict acoustic pressure distributions by exterior incident wave at Cylindrical Hydrophone Array (CHA) sensor's positions, acoustic pressure analysis is performed by using beam tracing method. Beam tracing method is well-known of reliable pressure analysis methods at high-frequency range. When an acoustic noise source is located at the center of rectangular room, acoustic pressure analysis is performed by using both beam tracing method and Power Flow Boundary Element Method (PFBEM). By comparing with results of beam tracing method and those of PFBEM, the accuracy of beam tracing method is verified. We develop the CHA pressure analysis program by verified beam tracing method. The developed software is composed of model input, sensor array creator, analysis option, solver and post-processor. We can choose a model option of 2D or 3D. The sensor array generator is connected to a sonar which is composed of center position, bottom, top and angle between sensors. We also can choose an analysis option such as analysis frequency, beam number, reflect number, etc. The solver module calculates the ray paths, acoustic pressure and result of generating beams. We apply the program to 2D and 3D CHA models, and their results are reliable.

• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.26-33
• /
• 2006

A sonar dome is basically designed and installed to protect sonar array from shocks, sea wave slaps and floating matters. The acoustic wave passing through sonar dome, however, can be distorted in magnitude and phase. This paper presents a numerical method for predicting the steady-state sound pressure on the surface of transducer array in the sonar dome and typical results of sonar beam pattern affected by sonar dome. A beam tracing model with phase information and a multi-layered elastic boundary model are involved. A full three-dimensional sonar dome is modeled as a GRP acoustic window, a rubber coated steel baffle and a rubber coated steel hull. A transducer array is modeled as thick steel cylinder. There are some assumptions such as incidence of plane wave, specular reflection on boundary and directionality of transducer element.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.388-397
• /
• 1998

This paper gives the way of analyzing internal noise of rolling stocks which is urgently required by civilians. Triangular beam method among ray tracing techniques is utilized to compute noise distribution of rolling stocks. Noise source and transmisstion loss of several sections from experimental work are included in this calculation. Ray tracing technique is found useful to compute big structures like rolling stocks.

• 한국음향학회지
• /
• 제27권1호
• /
• pp.1-11
• /
• 2008

기하음향학 방법들을 이용한 중주파수 해석의 어려움을 해결하기 위하여 소리의 전파에서 위상 정보를 고려한 위상 기하음향학 방법이 제안되었다. 위상 기하음향학 방법은 위상정보를 고려하여 중주파수 대역의 간섭 현상을 설명할 수 있는 장점을 가지고 있다. 그러나 이러한 방법들을 이용하여 소리의 파동성으로 대표되는 저주파수 현상들을 모두 설명할 수 없다. 특히 저주파수 대역에서는 모서리나 장애물에 의한 회절현상을 고려하지 못하여 전달함수나 충격응답의 예측시 오차가 발생한다. 또한 실수인 흡음 계수를 사용한 해석 결과는 측정치와 차이를 보이므로 반사 계수의 잘못된 위상 정보는 교정되어야 한다. 본 연구에서는 균일 회절 이론을 병합한 위상 빔 추적법의 결과를 기존의 위상 빔 추적법의 결과와 비교하였다. 또한 벽면 반사계수의 위상을 변화시키며 위상 정보의 영향을 조사하였다. 제안된 오차 보정 방법들을 이용하면, 좀더 낮은 주파수 대역까지 정확성을 향상시켜 위상 빔 추적법을 실내음향 예측에 적용할 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.54-57
• /
• 2002

In this paper, an adaptive beam tracing method with revised subdivision technique is proposed, in which the beam is generated by a set of three rays. According to reflection and/or refraction of the rays on the buildings and/or ground, additional rays are generated adaptively and the beam is subdivided efficiently and automatically. After generation of the set of beams, we transform the electromagnetic wave propagation data into volume data. Then one can visualize the data of propagation with reflection, refraction and interaction in full three dimensional space at any viewpoint by the so-called ray casting algorithm, which is one of the most useful methods in compute. graphics(CG).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.727-732
• /
• 2014

The goal is to find the position of the sound source with the TRM at reflections and refractions environment. The Fermat's principle applied to the ray tracing method are expected to follow the acoustic path in order to obtain acoustic distance and transmittance to. Utilizing them in the TRM was confirmed rear reflectance affect on estimated position, resolution and side lobe. And the TRM performance were superior to one of the beam forming techniques.

• 한국소음진동공학회논문집
• /
• 제13권3호
• /
• pp.217-224
• /
• 2003

In this study, the adaptive triangular beam method(ATBM) considering different sound reflection coefficients and angles of a triangular beam on two or more planes as well as diffraction effect is suggested. The ATBM, subdividing a tracing triangular beam into multiple triangular beams on reflection planes, gives reliable and convergent sound-field analysis results without the dependancy on the number of initial triangular beam segmentation to search sound propagation paths from source to receiver. The validity of the method is verified by the comparison of numerical and experimental results for energy decay curve and steady-state sound pressure level of rooms having direct, reflective and diffractive sound paths.

• 한국항공우주학회지
• /
• 제42권6호
• /
• pp.515-521
• /
• 2014

본 논문에서는 Ray-tracing 기법을 이용하여 그레고리안 안테나의 부반사판을 축변환 후 회전하여 급전혼으로 회귀되는 전파를 없애 이득 및 정재파비를 개선 시키고 부반사판의 크기와 전체적인 부피를 줄여 효율적인 구조를 갖는 축변위그레고리안 안테나를 설계하였다. 설계된 급전혼의 방사패턴을 이용하여 급전혼-부반사판-주반사판으로 전달되는 전파의 경로를 추적하여 주반사판 개구면에서의 전계분포를 구하고 이로부터 원거리 복사패턴을 계산하는 프로그램을 작성하여 안테나 성능을 최적화 하였다. 설계된 안테나는 CST와 제작 측정을 통해 계산결과와 비교하여 이득, 빔폭, 방사패턴, 부엽준위, 반사손실이 계산 결과와 매우 유사함을 확인함으로써 Ray-tracing기법에 대한 타당성을 검증하였다.

• Journal of Welding and Joining
• /
• 제23권2호
• /
• pp.81-89
• /
• 2005

A numerical model for multiple reflection effects of a polarized beam on laser grooving has been developed. The surface of the treated material is assumed to reflect laser irradiation in a fully specular fashion. Combining electromagnetic wave theory with Fresnel's relation, the reflective behavior of a groove surface can be obtained as well as the change of the polarization status in the reflected wave field. The material surface is divided into a number of rectangular patches using a bicubic surface representation method. The net radiative flux far these patch elements is obtained by standard ray tracing methods. The changing state of polarization of the electric field after reflection was included in the ray tracing method. The resulting radiative flux is combined with a set of three-dimensional conduction equations governing conduction losses into the medium, and the resulting groove shape and depth are found through iterative procedures. It is observed that reflections of a polarized beam play an important role not only in increasing the material removal rate but also in forming different final groove shapes. Comparison with available experimental results for silicon nitride shows good agreement for the qualitative trends of the dependence of groove shapes on the electric field vector orientation.

• 대한조선학회지
• /
• 제8권1호
• /
• pp.1-16
• /
• 1971

Ship hulls obtained by the streamline tracing method usually have characteristically drooped keel lines at the bottom, and a flattening of these bottoms would contribute considerably in utilizing these analytically obtainable hull forms in practical usage. In this dissertation, the author deals with a study on the determination of a practical hull form by the streamline tracing method with a particular emphasis on the bottom flattening problem. Investigations are centered around the form and the terms of bottom doublet distribution. Several examples are computed by varying bottom doublet sheet systematically while the main side source distribution is kept the same. The following conclusions are obtained based on those computed results: after the strength of a bottom doublet sheet can be determined more easily and efficiently by employing the concept of a control plane. If the distance from the distributed plane of the bottom doublet sheet to the control plane is defined as the control distance, the strength of the bottom doublet sheet, the flatness of traced lines, and the increment of the beam length ratio by adding the bottom doublet sheet are all related to the control distance by linear equations near the design bottom. It is observed that a better result can be obtained by using a "line-sampling method" for ${\zeta}_K>2T/L$, and a "plane-sampling method" for ${\zeta}_K{\leq}2T/L$, provided that the check points are sampled in the range ${\xi}{\leq}0.7$.