• Journal of Korean Society of Steel Construction
• /
• v.16 no.2 s.69
• /
• pp.247-255
• /
• 2004

An experimental program was undertaken to develop seismic retrofit methods of existing steel moment connections with floor slab for improved seismic performance. Five full-scale composite specimens were tested under cyclic loading. Conventional through-diaphragm connections [please check this; no search results were found for through-diaphragm connections] composed of square-tube column and H-beam were retrofitted by adding either a bottom-flange dogbone (RBS) or an improved welded horizontal stiffener at the beam bottom flange. The effectiveness of the proposed retrofit connections schemes was evaluated. The specimen retrofitted using the RBS concept at the bottom flange showed poor connection ductility. In contrast. specimens with the proposed horizontal stiffener details exhibited improved connection ductility.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.3
• /
• pp.231-238
• /
• 2007

Ultrasonic inspection of austenitic steel weldments is a truly difficult task due to complicated wave propagation phenomena such as beam skewing, splitting and distortion. In order to understand these phenomena and design proper inspection procedures, simulation is increasingly paid more attention to. This article addresses a ray tracing based approach to determine incident angle and position of optimal wave mode ultrasonic beam for flaw detection in anisotropic and inhomogeneous austenitic steel weldments. Specially, the optimal mode of ultrasonic wave wave is selected by ray tracing simulation, and an optimization approach based on ray tracing and bi-section search is proposed in order to find the ray path connecting two given points in weldments. With help of this approach, the optimal incident angle and position of ultrasonic beam can be determined for a given flaw position.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.2
• /
• pp.185-191
• /
• 2008

Optimal damping layout of the constrained viscoelastic damping layer on beam is identified with temperatures by using a gradient-based numerical search algorithm. An optimal design problem is defined in order to determine the constrained damping layer configuration. A finite element formulation is introduced to model the constrained layer damping beam. The four-parameter fractional derivative model and the Arrhenius shift factor are used to describe dynamic characteristics of viscoelastic material with respect to frequency and temperature. Frequency-dependent complex-valued eigenvalue problems are solved by using a simple re-substitution algorithm in order to obtain the loss factor of each mode and responses of the structure. The results of the numerical example show that the proposed method can reduce frequency responses of beam at peaks only by reconfiguring the layout of constrained damping layer within a limited weight constraint.

• Imaging Science in Dentistry
• /
• v.48 no.2
• /
• pp.79-86
• /
• 2018

Purpose: This study aimed to carry out a systematic review of studies in the literature comparing conventional imaging techniques with cone-beam computed tomography in terms of the role of these techniques for assessing any of the following periodontal conditions and parameters: infrabony defects, furcation involvement, height of the alveolar bone crest, and the periodontal ligament space. Materials and Methods: Interventional and observational studies comparing conventional imaging techniques with cone-beam computed tomography were considered eligible for inclusion. The MEDLINE and Embase databases were searched for articles published through 2017. The PRISMA statement was followed during data assessment and extraction. Results: The search strategy yielded 351 publications. An initial screening of the publications was performed using abstracts and key words, and after the application of exclusion criteria, 13 studies were finally identified as eligible for review. Conclusion: These studies revealed cone-beam computed tomography to be the best imaging technique to assess infrabony defects, furcation lesions, the height of the alveolar bone crest, and the periodontal ligament space.

• Advances in Computational Design
• /
• v.1 no.1
• /
• pp.79-86
• /
• 2016

In this study, the three different meta-heuristics namely the Grey Wolf Optimizer (GWO), Stochastic Fractal Search (SFS), and Adaptive Differential Evolution with Optional External Archive (JADE) algorithms are examined. This study considers optimization of the planer frame to minimize its weight subjected to the strength and displacement constraints as per the American Institute of Steel and Construction - Load and Resistance Factor Design (AISC-LRFD). The GWO algorithm is associated with grey wolves' activities in the social hierarchy. The SFS algorithm works on the natural phenomenon of growth. JADE on the other hand is a powerful self-adaptive version of a differential evolution algorithm. A one-bay ten-story planar steel frame problem is examined in the present work to investigate the design ability of the proposed algorithms. The frame design is produced by optimizing the W-shaped cross sections of beam and column members as per AISC-LRFD standard steel sections. The results of the algorithms are compared. In addition, these results are also mapped with other state-of-art algorithms.

• Computational Structural Engineering
• /
• v.5 no.2
• /
• pp.93-104
• /
• 1992

The final objective of optimization methods is to find global optimum accurately and efficiently. The optmization processes by simulated annealing and genetic algorithm which have stochastic search process are examined and are applied to several mathematical models and truss, beam structures. Then the robustnesses of these two methods are studied and compared with the results of deterministic optimization methods from the viewpoints of reliability and running time in obtaining the global optimum.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.217-221
• /
• 1999

본 연구는 직렬생산시스템의 제공품(Work in Process Inventory)을 최소화하기 위하여 완충 저장시설의 최적소요 및 배분을 위한 시뮬레이션 모델의 개발이다. 이를 위하여 먼저 목표 생산률을 만족하기 위한 완충저장시설의 총소요산출을 위하여 적정설비배치를 고려한 완충저장시설의 수요 및 적정배분을 함께 고려한 혼합모델을 개발하였다. 먼저 목표생산률의 만족과 적정설비배치를 동시에 고려할 경우, 완충저장시설의 총소요산출을 위한 CAN-WIP 모델을 개발하고 이를 최적 배분하기 위하여 이진탐색(Binary Search)방법과 휴리스틱 방법인 Beam Search 방법을 사용하였다. 이를 기존의 시뮬레이션 모델 (FACTOR/AIM, AutoMod 등)을 사용하여 그 결과를 비교하였다. 이를 위한 전산프로그림을 개발하고 예제를 통하여 그 결과를 보였다.

• Structural Engineering and Mechanics
• /
• v.34 no.5
• /
• pp.597-609
• /
• 2010

A problem formulation and solution methodology for design optimization of laminated thin-walled composite beams of generic section is presented. Objective functions and constraint equations are given in the form of beam stiffness. For two different problems one for open section and the other for closed section, the objective function considered is bending stiffness about x-axis. Depending upon the case, one can consider bending, torsional and axial stiffnesses. The different search and optimization algorithm, known as Evolution Strategies (ES) has been applied to find the optimal fibre orientation of composite laminates. A multi-level optimization approach is also implemented by narrowing down the size of search space for individual design variables in each successive level of optimization process. The numerical results presented demonstrate the computational advantage of the proposed method "Evolution strategies" which become pronounced to solve optimization of thin-walled composite beams of generic section.

• Computers and Concrete
• /
• v.13 no.4
• /
• pp.457-482
• /
• 2014

This paper summarizes available literature on the optimization of reinforced concrete (RC) beams. The objective of optimization (e.g. minimum cost or weight), the design variables and the constraints considered by different studies vary widely and therefore, different optimization methods have been employed to provide the optimal design of RC beams, whether as isolated structural components or as part of a structural frame. The review of literature suggests that nonlinear deterministic approaches can be efficiently employed to provide optimal design of RC beams, given the small number of variables. This paper also presents spreadsheet implementation of cost optimization of RC beams in the familiar MS Excel environment to illustrate the efficiency of the exhaustive enumeration method for such small discrete search spaces and to promote its use by engineers and researchers. Furthermore, a sensitivity analysis is performed on the contribution of various design parameters to the variability of the overall cost of RC beams.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.3
• /
• pp.103-112
• /
• 1998

In this study, database schema which is capable of maintaining various design-knowledge and applicable to the structural designs has been presented. Futhermore, by utilizing the database system, RECODSS (REinforced COncrete Design Support System) was developed as well. Knowledge-base that were formulated from the document is constructed by applying the concrete standard specifications of Korea from 1989. The basic drawing was prepared by $AutoCAD^TM$. As an inference in the preliminary design, the certainty function and the interpolation function were presented. The certainty function is made by assuming linear relations between each data while referencing $MYCIN^TM$ (expert systems). Nevertheless, the interpolation function was made by utilizing the linear Lagrange interpolation. For the search of the design-knowledge, fast search algorithm and full-text search algorithm were used, however, the design engine was programmed with C language. RECODSS was applied for designing a slab and a beam member. And the results were compared with the existing results. In conclusion, RECODSS was able to efficiently manage various design knowledge and to introduce stable design results.