• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.442-444
• /
• 1998

We made the beam crosssectional monitor system which was possible to display the ion beam crosssection extracted from accelerator on personal computer monitor. Previous beam profile monitor system could detect the central beam position with limited low beam current, but this developed beam crosssectional monitor system could operate at the relatively higher beam current. In addition we realized the real time data taking system by adopting the VXI system for beam size, central position and crosssection.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.527-527
• /
• 2012

In the Pohang Light Source (PLS), a major upgrade (PLS-II) of existing machine had been performed in last 3 years. Big improvements in beam parameters are expected from this major upgrade and various diagnostic instruments were installed to measure them. These include beam position monitor, beam current monitor, tune monitor, scraper, beam loss monitor, photon beam monitor, beam size monitor, streak camera, and so on. In this work, we would like to briefly introduce diagnostic instruments of the PLS-II and present measurement results in the commissioning process of the PLS-II.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.325-325
• /
• 2010

The beam position monitor (BPM) in the storage ring measures the position of electron beam with pickup electrodes which are coupled in capacitive way to the electron beam. However, some of the BPM in the PLS storage ring suffer the vertical noise signal at the operation frequency of about 500 MHz, so the pick-up frequency of these BPM is change to 375 MHz. In this study, it is experimentally proved in the PLS beam chamber that the BPM noise is caused by the TE mode excited in the beam chamber.

• Nuclear Engineering and Technology
• /
• 제45권4호
• /
• pp.523-528
• /
• 2013

The beam position monitor (BPM) is an essential component for the PEFP 100-MeV linac's commissioning. A prototype stripline-type linac BPM was designedfor this purpose. The electrode aperture is 20 mm in diameter, and the electrode is 25 mm long, so it can be installed between Drift Tube Linac (DTL)101 and DTL102, which is the shortest distance. One end of the electrode is connected to the Sub Miniature Type A (SMA) feed through for signal measurement, and the other end is terminated as a short. The signal amplitude of the fundamental component was calculated and compared with that of the second harmonic component. The designed BPM was fabricated and a low-power RF test was conducted. In this paper, the design, fabrication and low power test of the BPM for the PEFP linac are presented.

• 한국광학회지
• /
• 제10권2호
• /
• pp.138-145
• /
• 1999

칼라 CTR(cathode ray tube) 모니터의 빔 전류와 화면위치를 변화시키면서 misconvergence, 스폿 크기, 디스플레이 휘도, 색도 좌표를 측정하였다. 일차원 CCD(charge coupled device)를 사용하여 misconvergence를 측정하였으며, 시감효과를 고려하는 SQRI(square-root integrals)를 도입하여 분해능을 나타내었다. 모니터의 miscovergence는 빔 전류에 영향을 받지 않고 화면의 위치에 따라 변하였으며, 화면 주변부에서의 misconvergence는 분해능을 저하시켰다.

• 한국진공학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2011

포항광가속기의 섹터 진공용기에 부착된 빔위치측정기의 수직방향 위치 읽음 값이 갑자기 변하는 오류가 관찰되었다. 이 오류의 원인을 알기 위해서 섹터 진공용기의 양 끝단에 있는 빔위치측정기의 전극을 통한 고주파전달 산란계수를 측정하였다. 급한 변화를 보이는 섹터 진공용기에서는 측정한 산란계수의 첨단 값이 빔위치측정기의 작동 주파수 내에 존재함을 확인하였고, 전산시늉을 통해 빔위치측정기의 작동 주파수내 첨단 주파수가 가로 전장 모드의 공진모드와 일치함을 확인하였다.

• 한국진공학회지
• /
• 제15권4호
• /
• pp.331-337
• /
• 2006

국제 직선형 충돌 가속기 (ILC; International Linear Collider). 자유전자 레이저 (FEL: Free Electron Laser)와 같은 차세대 가속기에 사용 할 공동형 빔위치 측정기 ( 공동형 BPM: cavity-type beam position monitor)를 일본 고에너지 연구소 (KEK; High Energy Accelerator Research Organization)와 공동으로 개발하였다. ILC 및 FEL의 운전을 위해서는 빔 기반 정렬 (beam-based alignment)과 되먹임 장치 (feedback system)가 필수적으로 요구되는데, 이를 위해서는 적절한 위치에 서브마이크론의 분해능을 지닌 빔위치 측정기를 설치하여야 한다 [1]. 공동형 BPM은 기계적인 정밀도에 매우 민감하므로 정밀한 제작과 미세한 기계적 조정을 통하여 성능을 달성하게 된다. 우리는 제작 오차를 줄이기 위하여 공진 공동, 빔 튜브, 도파관, 전기도입기 등 모든 부품을 조립 후 한꺼번에 진공 브레이징 하였다. 공동의 외주면에는 네 개의 튜닝 핀을 두어 공진주파수 및 x-y 격리도 (x-y isolation between coupled waveguide)를 미세 조정할 수 있도록 하였다. 현재 개발된 공동형 BPM 은 공진주파수는 6.422 GHz 이며, 공동 내경은 53.822 mm, 빔의 위치 측정 범위는 ${\pm}250 {\mu}m$이다. network analyzer를 관측하면서 튜닝핀을 이용하여 x-y 격리도를 -40 dB 이하로 조정할 수 있었다. 실제 KEK ATF2에서의 전자빔을 이용한 시험에서 신호의 모양, x-y 격리도, 민감도 등에서 만족한 결과를 얻었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1954-1956
• /
• 1996

In this paper, we measured the reflectance of the $100{\mu}m{\times}100{\mu}m$ micromirror. In order to reduce the size of the HeNe laser beam, an eyepiece and an objective lens were used. CCD camera was used to the monitor the position and focusing. It was found that the diameter of the focused laser beam was about $3{\mu}m$. The reflectance of the reflectance of the micromirror was over the surface and 87% of the commercial mirror.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.229-229
• /
• 2012

It is significant issue to control the unwanted transverse electric (TE) modes in the vacuum chamber for preventing the position reading noise from the beam position monitor (BPM) of storage ring. We introduce shunt structure to control the frequency distribution of TE resonance modes excited in the vacuum chambers of the Pohang Light Source II (PLS-II). The design of shunt structure is performed using the full three dimensional finite-difference time-domain (FDTD) simulation. It is verified that the sympton of the BPM noise is not oberved up to the beam current of 190 mA in the commmissioning of PLS-II.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2249-2251
• /
• 1997

Total 144 quadrupole magnets are installed in PLS. The magnets are connected in series with groups of two or 24. Each group is powered by a high-precision constant-current DC power supply. For the purpose of the beam based alignment of beam position monitors in the PLS, it is necessary to adjust the current of each quadrupole independently. To achieve this, a high current shunt regulator is designed. It can shunt a maximum 50 A of the quadrupole magnet current. The shunt regulator is programmable and the current amplitude can be varied linearly with a 12-bit resolution. Power transistors are used in the current shunt regulator. The operation of transistors is in linear region. The RS232C protocol is used for remote control and status report of the shunt regulator to the main control centre of the PLS. Preliminary result indicates that the calibration accuracy of the beam position monitor can be achievable in less than $10{\mu}m$.