• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.233-236
• /
• 2003

The micro-stereolithography technology made it possible to fabricate a freeform 3D micro-structure. Using this technology, two kind of applications were fabricated and tested: micro-lens and micro-mixers. The focal length and f-number of the micro-lens were 5 mm and 2.5, respectively. The focusing ability of the micro-lens was verified by defocusing the He-Ne laser beam after passing the lens. Two mixers are Kenics micro-mixer and BEKM. BEKM is a modified Kenics micro-mixer by introducing barriers on the pipe walt periodically to enhance the mixing via the chaotic mechanism in the helical flow of Kenics micro-mixer. Experimental result shows good mixing performance of developed mixers. Especially, the BEKM shows better mixing performance then Kenics micro-mixer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.280-283
• /
• 2003

In this paper, there was finding laser beam focal length using the camera at the work with laser preprocess. A process have some similarity that the laser direct writing was condition of unused other light source in order to a partical object of working substrate, so we worked finding focal length using yellow light. As we found focal lengths from three points of substrate edges, The focal length of all substrates was able to be computed by calculating a plane equation using these three point. Also we make a device and software that can automatically perform all of the processes.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.220-221
• /
• 2000

본 연구에서 목표로 하는 집속광학계는 레이저 다이오드의 emitting area가 50$mu extrm{m}$$\times$1.0$\mu\textrm{m}$ 이고 pumping 매질인 crystal의 TE $M_{00}$ mode 발생을 위한 최소 입사빔의 단면도가 단축과 장축의 직경이 각각 206$\mu\textrm{m}$, 204$\mu\textrm{m}$인 타원이어야 하기 때문에 수직 방향으로는 200배 수평 방향으로는 4배의 확대를 할 수 있는 광학계 이어야 한다. 일반적으로 레이저 다이오드용 집속광학계는 레이저다이오드의 수직 수평 emitting area가 다르기 때문에 실린더형, 원통형 또는 toroidal형의 렌즈를 조합하여 구성한다. 그러나 우리의 경우는 emitting area의 수직 수평비 즉 집속광학계의 수직 수평의 굴절능( power )의 비가 50:1 이어야 하기 때문에 그림1과 같은 일반적인 실린더형, 원통형 또는 toroidal형의 렌즈의 조합으로 집속광학계를 구성하기에는, 렌즈 power비를 50:1로 하기 위해 필요로 하는 공간이( 첫번 렌즈와 마지막 렌즈까지의 거리 ) 커지는 점, 필요로 하는 렌즈의 매수가 많아지는 점, 집속 beam의 형상 즉 단면의 이심률이 커져서 pumping에 비효율적이라는 점 등에서, 부적절하다. (중략)략)

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1005-1008
• /
• 2002

The authors introduce 3D display systems developed in our laboratories for recent ten years. Those are mainly realized by several technologies in holography: electro-holography. holographic stereogram, holographic optical elements (HOE) and hologram screen. We are currently focusing the development of 3D projection screen without glasses. Powerful directionality of the light beam is required for 3D projection screen unlike 2D type. We succeeded in achieving the superior diffractive efficiency of hologram screen that is based on the advanced volume holography. This technology is extensively useful to retrieve the Bragg condition of volume hologram in the three-dimensional space. Owing to this technology we could establish the principle of multi-view projection screen and have confirmed the case of 4 viewing points.

• Laser Solutions
• /
• v.14 no.2
• /
• pp.13-16
• /
• 2011

We fabricated the Fresnel zone plate using femtosecond laser lithography-assisted micro-machining, which is a combined process of nonlinear lithography and wet etching. We investigated the focusing properties by launching a 632.8nm wavelength He-Ne laser beam into the zone plate. The spot size of the primary focal point was $27{\mu}m$ and the intensity of focal point was 0.565W/$cm^2$.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.11
• /
• pp.1128-1136
• /
• 2012

This paper analyzes the vibration characteristics of an optical pickup actuator, which has six wire-suspensions and is used in optical disc drives(ODDs). The vibration characteristics of the actuator is mathematically described by analyzing its beam configuration and motion condition confined to lateral and longitudinal directions of the beams. The accuracy of the vibration characteristics is proved by comparing mode frequencies with a finite element analysis. Finally, it is shown that mode frequencies and shapes can be modified by changing design parameters in mathematical expressions.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.67-71
• /
• 1998

초음파 선형트랜스듀서에서 제한회절음장은 영상깊이에서 다른 방향으로 진행하는 평면파들의 선형적인 중첩으로부터 구한다. 제한회절음장을 구현하기 위한 송신음장은 영상 깊이를 지나가는 평면파들의 공간적인 확장으로부터 구해지는데 실제의 하드웨어로 구현하 기 어렵다. 본 논문은 진행방향이 다른 pulsed mode 평면파를 각각 송신한 후, 얻어진 데이 터로부터 합성집속 방법에 의하여 제한회절빔을 구현하였다. 제안한 방법은 모든 송신소자 에서 발사되는 음장의 크기가 동일하므로 송신전력이 증가하여 신호대잡음비와 명암비를 증 가시키며 간단한 하드웨어로 구현이 가능하다. 시뮬레이션 결과는 송신은 한점집속, 수신은 동적집속을 사용하는 기존의 방법과 비교하여 주엽(mainlobe)의 폭과 부엽(sidelobe)의 크기 관점에서 우수함을 증명하였다.

• Corrosion Science and Technology
• /
• v.9 no.1
• /
• pp.29-33
• /
• 2010

Laser machining technique, which is used focusing pulse YAG laser beam irradiation was applied to form area ratio controlled model cut-edge on pre painted Zn coated steels. A corrosion behavior of formed model cut-edge was investigated by rest potential measurement in 1 mol $m^{-3}$ NaCl with and without 0.5 kmol $m^{-3}$ $H_3BO_4$/0.05kmol$m^{-3}$ $Na_2B_4O_7$. The rest potential showed almost constant value with fluctuations. The amplitude of fluctuations increased with exposed area of steel surface. White corrosion products of zinc oxide and simonkollite was formed after the experiments at the formed model cut-edge.

• Journal of the Optical Society of Korea
• /
• v.4 no.1
• /
• pp.62-65
• /
• 2000

A new type of multi-viewing zone screen for multiview 3-D display is described. The screen is made by stacking a Fresnel lens and a reflective prism array plate. The screen performs both focusing and beam dividing functions and directs very narrow light beams to three viewing zones for three spectators. The results of experimental testing of the screen have demonstrated that current technology of Fresnel lens and prism grooves on PMMA(Ploymethyl Methacrylate) allows manufacture of screen having a pixel size of about 1-2 mm. This size is reasonable enough for a screen with dimensions about 1m size. Optical qualities of Fresnel lenses and grooved prism arrays achieve an angular resolution for the screen of several angular minutes.

• Journal of Welding and Joining
• /
• v.20 no.1
• /
• pp.69-75
• /
• 2002

This study investigated the effect of the system parameters on penetration depth measurement using infrared temperature sensing system. The distance from focusing lens to detector was varied to diminish the error in measuring weld bead width. The effect of bead surface shape on measured surface temperature profile was evaluated using specimen heated by electric resistance. The measuring distance from laser beam was changed to optimize the measuring point. The results indicated that the monitoring device of surface temperature using infrared detector array was applicable to real time penetration depth control.