• Journal of Korean Vacuum Science & Technology
• /
• 제7권1호
• /
• pp.1-7
• /
• 2003

The pressure distributions in the test stand built for developing KSTAR NBI ion sources were obtained using a network system composed of conductance elements modeling the ion source, the neutralizer, and other beam line components. The allowable regime was defined on the coordinates of the gas supply rate to the ion source and the neutralizer, considering the proper conditions of the three critical parameters, the ion source pressure for good arc discharge, the pressure integral in the neutralizer for sufficient neutralization, and the chamber pressure for minimum neutral beam loss. The neutral beam evolution along the path from the ion source extraction grid to the calorimeter through the neutralizer, the bending magnet and the vacuum chamber was estimated for typical pressure distributions.

• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.204-212
• /
• 1999

In this paper, the vibrational motion of a flexible beam clamped on a translating base and carrying a moving mass is investigated. The equations of motion which describe the total dynamics of the beam-mass-cart system are derived and the coupled dynamic equations are solved by unconstrained modal analysis. In modal analysis, the exact normal mode solutions corresponding to the eigenfrequencies for the position of the moving mass and the ratios of the mass of the flexible beam, the moving mass and the base cart are used. Proper transformations of the time solutions between the normal modes for a position and those for the next position of the moving mass are also adopted. Numerical simulations are carried out to obtain the open-loop responses of the system in tracking the pre-designed path of the moving mass.

• Computers and Concrete
• /
• 제16권4호
• /
• pp.605-623
• /
• 2015

A coupled experimental and numerical study of shear fracture in the edge-notched beam specimens of quasi-brittle materials (concrete-like materials) are carried out using four point bending flexural tests. The crack initiation, propagation and breaking process of beam specimens are experimentally studied by producing the double inclined edge notches with different ligament angles in beams under four point bending. The effects of ligament angles on the shear fracturing path in the bridge areas of the double edge-notched beam specimens are studied. Moreover, the influence of the inclined edge notches on the shear-fracture behavior of double edge-notched beam specimens which represents a practical crack orientation is investigated. The same specimens are numerically simulated by an indirect boundary element method known as displacement discontinuity method. These numerical results are compared with the performed experimental results proving the accuracy and validity of the proposed study.

• Korean Journal of Geomatics
• /
• 제1권1호
• /
• pp.69-74
• /
• 2001

In conventional photogrammetry, three-dimensional coordinates are obtained from two consecutive images of a stationary object photographed from two exposure stations, separated by a certain distance. However, it is impossible to photograph moving objects from two stations with one camera at the same time. Various methods to overcome this obstacle were devised e. g. taking the left and right scenes simultaneously with one camera using a beam splitter attached to the front, thus creating a stereo scene in one image. A beam splitter consists of two outer mirrors and two inner mirrors. This paper deals with research where the optical principles of the beam splitter were evaluated based on light path phenomena between the outer mirrors and the inner mirrors. A mathematical model of the geometric configuration was derived for the beam splitter. This allows us to design and control a beam splitter to obtain maximum scale and maximum base-height ratio by stepwise application of the mathematical model. The results show that the beam splitter is a very useful tool for stereophotography with one camera. The optimum geometric configurations ensuring maximum scale and base-height ratio are closely related to inner and outer reflector sizes, their inclination angles and the offsets between the outer mirrors.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.500-501
• /
• 2014

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.859-860
• /
• 2009

• 분석과학
• /
• 제13권2호
• /
• pp.222-228
• /
• 2000

비분산 적외선 방식에 의한 대기 중 일산화 탄소 측정용 검출기를 제작하고, 감도 및 안정성을 조사하였다. 검출 감도를 향상시키기 위하여 동일 흡수셀 내에 3개의 반사거울을 장착하여 셀 안에서의 빛의 통과거리가 증가되도록 설계하였다. 50cm 길이의 셀 안에서 빛의 통과거리를 16m까지 늘릴 수 있도록 컴퓨터 모사에 의해 반사거울의 곡률반경 및 곡률중심, 셀 안에서의 위치 등을 산출하여 셀을 제작하였다. 빛의 경로와 광학적 특성은 모의 셀 안에서 laser beam alignment에 의해 확인하였다. 투과광의 검출에는 광전도성 PbSe센서를 사용하였으며, 센서소자는 열전냉각방식에 의해 냉각하였다. 제작된 일산화 탄소 검출기의 검출한계와 스팬 드리프트는 각각 0.24ppm과 0.03ppm(v/v)이었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.765-766
• /
• 2008

In this paper, It has been emphasized of important path access during transmit of node when each node transmit broadcast service which one's of new MANET (Mobile Ad hoc Networks) of autonomy and mobility network structures. It has proposed analysis methods are hierarchical path structure of transmit which experience context aware through confidence to network connectivity alone as issue which can be reduce duplicate of beam forming on networks and maintenance one's of method got to optimized of transmission network that status information of context awareness using ad hoc ODDMRP(Ontology Doppler effect Dynamic Multicast Routing Protocol) path method.

• Structural Engineering and Mechanics
• /
• 제3권5호
• /
• pp.475-495
• /
• 1995

In the past, physical models have been proposed, in compliance with the concept of the compressive-force path, for the realistic design of various statically determinate structural concrete members. The present work extends these models so as to encompass indeterminate RC structural forms. Pilot tests conducted on continuous beams and fixed-ended portal frames have revealed that designing such members to present-day concepts may lead to brittle types of failure. On the other hand, similar members designed on the basis of the proposed physical models attained very ductile failures. It appears that, unlike current design approaches, the compressive-force path concept is capable of identifying those areas where failure is most likely to be triggered, and ensures better load redistribution, thus improving ductility. The beneficial effect of proper detailing at the point of contraflexure in an indeterminate RC member is to be noted.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.20-23
• /
• 2004

In non-selective frequency environment, it is difficult to take the advantage of path diversity. In the literature, some methods have been proposed to solve the issue. This paper presents a new method to obtain the resolvable path in Indoor Multi-carrier Code Division Multiple Access (MC-CDMA) system by using downlink beam forming. With the aid of downlink beamforming, the most reliable path is found and chosen for the communication link. The new approach is evaluated in term of bit error rate (BER) and power consumption. The simulation results show that the new approach can get better BER performance. However, the cost of BER improvement is a small degradation in power reservation.