• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.86-94
• /
• 1995

Bead shape in high frequency electric resistance (HER) pipe welding gives useful information on judging current welding conditon. In most welding process, heat input is controlled by skilled operators observing color and shape of bead. In this paper, a visual monitoring system is designed to observe bead shape in HERW pipe welding process by using structured light beam and a C.I.D(Charge injection device) camera. To avoid some difficul- ties arising in extracting stable features of stripe pattern and classifying the extracted features, Kohonen neural network is used to classify such bead shapes. The experimental results show accurate classification performance of the proposed method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.45-48
• /
• 1997

The low frequency pulsed MIG welding process of new current waveform control to switch over unit pulse conditions (pulse current, pulse duration) in the fixed cycle was developed and its effect were investigated for aluminium and its alloy. By using this new welding process, the bead appearance having clear ripple pattern, such as TIG welding bead can be obtained and the gap tolerance of lap and butt welding joint can be expanded.

• Journal of Welding and Joining
• /
• 제15권2호
• /
• pp.72-80
• /
• 1997

The spatter generation rate of GMA welding with $CO_2$ gas shielding was measured with the change of welding conditions such as wire feeding rate and welding voltage and then the results were analized with the accompanying changes in metal transfer mode and in bead geometry. The spatter generation rate (SGR) was relatively low not only wit the short circuit transfer but with the truely globular transfer mode. However, the SGR resulted with the mixed mode were consistantly high. The resultant wave pattern of mixed mode was due to the coexistance of short-circuit and globular transfer and characterized by the frequent appearance of instantaneous short circuit. Considering the result of SGR and that of bead geometry, it could be concluded that when the wire feeding rate (or welding current) was either low or high, the optimum bead shape could be obtained along with the low spatter generation. However, in the middle range of wire feeding rate, the optimum bead shape was only obtained in the mixed mode condition resulting in the high spatter generation.

• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.53-60
• /
• 1999

Conventionally, CCD camera and vision sensor using the projected pattern of light is generally used to inspect the weld bead defects. But with this method, a lot of time is needed for image preprocessing, stripe extraction and thinning, etc. In this study, laser vision sensor using the scanning beam of light is used to shorten the time required for image preprocessing. The software for deciding whether the weld bead is in proper shape or not in real time is developed. The criteria are based upon the classification of imperfections in metallic fusion welds(ISO 6520) and limits for imperfections(ISO 5817).

• 한국레이저가공학회지
• /
• 제11권1호
• /
• pp.32-35
• /
• 2008

In the remote welding system using $CO_2$ laser, laser beam can be rapidly transferred to a workpiece by moving mirrors of scanner system. So, it makes reducing the cycle time of welding process. We can also use and apply various patterns of weld beads by linear controlled mirrors. But most of the domestic car makers have usually applied use stitch-shaped weld bead. In that case, we don't have the merit of remote welding system efficiently. Therefore, in this paper, we investigated the characteristic of weld strength according to patterns of weld bead on $CO_2$ laser welding. And we also studied the relationship between shape of weld bead and value of tensile load.

• 한국공작기계학회논문집
• /
• 제15권2호
• /
• pp.87-92
• /
• 2006

This paper supplements shortcoming of radioactivity check by detecting defect of SWP weld zone using ultrasonic wave. Manufacture 2 stage robot detection systems that can follow weld bead of SWP by method to detect weld defects of SWP that shape of weld bead is complex for this as quantitative. Also, through signal processing ultrasonic wave defect signal system of GUI environment that can grasp easily existence availability of defect because do videotex compose. Ultrasonic wave signal of weld defects develops artificial intelligence style sightseeing system to enhance pattern recognition of weld defects and the classification rate using neural net. Classification of weld defects that do fan Planar defect and that do volume defect of by classify.

• 감성과학
• /
• 제26권4호
• /
• pp.71-92
• /
• 2023

본 연구의 목적은 구슬 문양 디자인의 상징성과 의미 및 신라문화와의 연관성, 유리구슬 제조의 제반 여건을 조사하여 예술성과 기술성이 뛰어난 신라 인면 상감 유리구슬의 신라 자체 제작설을 검증하는 것이다. 연구방법으로는 디자인 분석 이외에 고문헌과 신화, 유리 유물, 유리 및 금속의 생산기술, 실크로드 교차로의 특성 등을 조사하였으며 홍산문화 유물, 다른 상감 유리구슬의 사례들을 수집하였다. 마한, 부여, 신라인은 구슬을 보배로 삼고 장신구에 애용하였는데, 구슬 속의 인면상 상투와 금관장식, 새와 꽃나무의 모든 디자인 요소가 김알지, 김수로, 박혁거세, 주몽 등 위인들의 난생설화, 북방의 새 및 신수 숭상 등과 밀접하였고, 디자인 요소와 배치가 신라의 다른 유물에서도 동일하게 표현되고 있음을 확인하였다. 구슬과 인면상의 기원은 홍산문화였으며 하가점하층문화의 고조선 북표에서는 구슬용 석범이 발견되었다. 또 경주 식리총의 상감 유리구슬과 일본 토간모리 고분의 인면 상감 유리구슬의 출토는 신라 자체 제작설을 확증시켜주는 것이다. 백제인이 5세기 일본에 유리구슬 제작소를 둔 사실은 신라인이 인도네시아 자바에도 제작소를 두었음을 의미한다. 신라와 밀접한 관계였던 인도네시아 자바는 신라의 해상실크로드 교차로, 원석 및 노동력 제공지이고 유리구슬의 소비 지역이나 기원지는 아니었다. 이에 구슬에 대한 신화와 전통을 보유하고 머리에 상투와 금관을 착용하였으며, 금속 및 상감 기술 등 난이도 높은 기술을 보유했던 신라가 자체 제작한 것이 틀림없다.

• 한국미생물·생명공학회지
• /
• 제18권4호
• /
• pp.352-359
• /
• 1990

분쇄마찰매체효소반응계에서 glucoamylase와 Alpha-amylase의 보완작용에 의한 옥수수 생전분의 효소당화 mechanism을 규명코자, 분리.정제된 상기 효소의 혼합 비율에 따른 당화양상 및 생성당 조성, 전분입자 구조, 생전분입자의 particle size 분포, X-ray 회절양샹의 변화 등을 관찰하였다. 분쇄마찰매체 효소반응계에서도 효소를 분리하여 사용하였을 때보다 glucoamylase와 $\alpha$-amylase를 혼합사용할 경우 당화율이 크게 향상되었으며, 고순도의 glucose 생산에 적합한 두 효소의 혼합비율은 약 1:1-1:2(unit) 로 판명되었다.

• KIEAE Journal
• /
• 제13권2호
• /
• pp.53-60
• /
• 2013

This study examined the building envelope structure used in small housings near urban area which have not good energy source in relation to the application of passive design for energy saving of small-sized architectural design firms in local cities and aimed to provide the basic materials of future design direction of designers and housing owners by analyzing economy of a project in order to know the amount of energy saving and additional expenses depending on the building envelope pattern. As a result of comparing and examining the energy saving cost from the period of use compared to investment by the thickness of insulating materials based on building envelope pattern for energy saving, it was found that the thicker the insulating materials are, the more energy saving amount is. While the current bead-type insulating materials have short payback period due to low initial investment, extruded insulating materials show the difference of five years compared to bead-type insulation because of its high initial investment.

• 대한가정학회지
• /
• 제50권5호
• /
• pp.39-49
• /
• 2012

This study looked into the trend of expression of animal motifs that appears in modern fashion, and the values embedded in them. As to the research method, empirical analysis was performed on the works presented at the four global collections of Paris, Milan, New York and London from 2001S/S to 2010F/W, as well as a literature review. As a result, animal motifs applied in modern fashion appeared in material groups, such as leather or feather. The first group shows a realistic material feel, with artificial leather or fur, expressed in a transformed complex animal motif, with process skill or various methods of expression. The second group is the case of a single motif or reality, mode, and ion pattern. Printing is a generic expression, but patchwork, collage or bead ornament are also used, and expressed in the various forms of pattern: pattern in a single animal, pattern in different animals, and pattern combining both animal and other shape. The third group is a small decorative ornament, including headset or accessory and makeup, which is transformed in an animal-characterized motif into part of clothing components for expression, or to set the real animal to the stage for a performance. The embedded values were also categorized as natural beauty, sensual female beauty, pleasure, and ornamentation, which could be an endless spiritual source, and a breakthrough that enables us to show a creative and new aesthetic for the modern fashion field.