• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.67-70
• /
• 2015

특정 인터넷 서비스는 그 성격에 따라 제한된 위치에서만 서비스를 제공하도록 설계한다. 이러한 시스템 구조에서 사용자의 위치정보는 서비스 접근을 통제하는 과정에서 핵심적으로 사용되며 LSB(Location Based Service), WPS(Wifi Positioning System)와 같은 기술로 제안되었다. 그러나 기존 인증 기법은 대상이 일정하지 않은 불특정 다수의 사용자가 접근하기에 적합하지 않고, 서비스 공급자의 무선 AP를 이용하기 때문에 과도한 서버 부하에 취약하다. 따라서 본 논문에서는 이러한 문제를 해결하기 위해서 Beacon을 이용한 위치기반 인증 시스템을 제안한다. Beacon이란 Bluetooth 기술을 기반으로 근거리 무선 통신 기기이다. 사용자가 서비스 접근 권한을 획득하기 위해 인증 서버에서 요구하는 인증 코드는 BLE(Bluetooth Low Energy)를 사용하는 Beacon이 브로드캐스팅한다. 즉, 사용자는 Beacon이 BLE로 브로드캐스팅한 데이터를 수신할 수 있는 물리적인 범위까지 접근해야 인증 절차를 수행할 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.278-279
• /
• 2015

Recently, With the development of smart devices of interest in the intelligent indoor positioning service with a smart terminal it is increasing. The BLE(Bluetooth Low Energy) is an indoor location positioning technology has attracted the attention. However, there is no way to check the reliability of the position information collected by the smart terminal receiving a big location data. This is because the reliability of an indoor position information because of a signal interference to drop. In this paper, we propose a method of managing big data collected in order to obtain reliable position information from the position information of iBeacon.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.925-932
• /
• 2015

In this paper, by utilizing the iBeacon is BLE (BlueTooth Low Energy) protocol devices that are supported by over the Bluetooth 4.0, and have implemented a system to improve the accuracy in the system for measuring the position of the user. After measuring through the system according to the state of the iBeacon, the interference factors are analyzed through analysis of the collected data, and applying the extended Kalman filter for calibration. Compared with the data after applying a filter with existing data, it was confirmed an increase in accuracy. Improvement techniques for providing the less complexity to the actual implementation, is effective in improving the accuracy of vulnerable services basic iBeacon.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.231-238
• /
• 2022

In this paper, among short-range wireless communication technologies such as Beacon, Bluetooth, UWB (Ultra-wideband), ZigBee, NFC (Near Field Communication), Z-Wave, 6LoWPAN (IPv6 over Low power WPAN), D2D (Device to Device), etc., proposed an IoT service platform based on a beacon that can provide indoor positioning. And, a beacon-linked web server was designed by blocking indiscriminate beacon spam signals and applying REST web service technology with flexibility and scalability. Data accessibility between different devices was verified by testing the success rate of data transmission, the success rate of blocking beacon push, the success rate of IoT interlocking processing, the accuracy of location positioning, and the success rate of REST web service-based data processing. Through the designed IoT service platform, various proposals and research on short-distance-based business models and service platforms will be conducted in the future.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.11-16
• /
• 2023

As techniques for indoor positioning, fingerprinting, indoor positioning method using trilateration, and utilizing information obtained from equipments by Wi-Fi/Bluetooth, etc are common and representative methods to specify the user's indoor position. However, in these methods, an indoor space should be provided with enough space to install a large number of equipment (AP, Beacon). In this paper, we propose a technique that can express the user's location within a building by simultaneously using the GPS signal and the signal transmitted from the beacon in a building structure where the conventional method cannot be applied, such as a narrow building. A shortest path search system was designed and implemented by applying the Dijkstra Algorithm, one of the most representative and efficient shortest path search algorithms for shortest path search. The proposed technique can be considered as one of the methods for measuring the user's indoor location considering the structural characteristics of a building in the future.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.291-291
• /
• 2004

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1139-1145
• /
• 2008

A robust position sensing system is proposed in this paper for a ubiquitous mobile robot which moves indoors as well as outdoors. The Differential GPS (DGPS) which has a position estimation error of less than 5 m is a general solution when the mobile robot is moving outdoor, while an active beacon system (ABS) with embedded ultrasonic sensors is reliable as an indoor positioning system. The switching from the outdoor to indoor or vice versa causes unstable measurements on account of the reference coordinates and algorithm changes. To minimize the switching time in the position estimation and to stabilize the measurement, a robust position sensing system is proposed. In the system, to minimize the switching delay, the door positions are stored and updated in a database. Using the database, the approaching status of the mobile robot from indoor to outdoor or vice versa has been checked and the switching conditions are prepared before the mobile robot actually moves out or moves into the door. The reliability and accuracy of the robust positioning system based on DGPS and ABS are verified and demonstrated through the real experiments using a mobile robot prepared for this research.

• Journal of the Korea Society for Simulation
• /
• v.25 no.2
• /
• pp.21-29
• /
• 2016

Indoor location system has been used Wi-Fi to get a location. After the development of BLE(Bluetooth Low Energy), the interest in the method of a indoor positioning had been move on. It has more advantages than using Wi-Fi. Easy installation, low power consumption, low signal interference and changeable setting(Advertising interval, tx power, etc.). These things can improve efficiency or accuracy in a indoor positioning system. For this reason, recent indoor positioning system uses BLE rather than Wi-Fi. Accordingly, error factors of BLE beacon based indoor positioning should be studying for high accuracy of indoor positioning. In this research, set up few experiment scenarios and keep a close watch on how technological, environmental factor is affecting positioning accuracy. When a application uses largest signal strength to get the indoor location, the mean error of experimental results was decreased compare to using received signal strength in real-time. The result was same when the application applied average and standard deviation to get the indoor location. Changing advertising interval had an effect on the mean error of indoor positioning. Short advertising interval makes the lower mean error than large advertising interval.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1307-1312
• /
• 2015

The recent adoption of Bluetooth LE technology in smart phones triggered commercial interest in RSSI-based positioning technology. Estimation error in RSSI measurement due to the antenna pattern, multipath fading, environmental noise has to be considered for designing beacon systems. The paper proposes an analysis method and beacon planning rules for a small and isolated indoor service area, based on probabilistic model of RSSI estimation error. As an practically important guide, the beacons have to be installed at the boundary of the service area to minimize the maximum position error, whereas the beacons have to be evenly distributed in the service space to minimize the average estimation error.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.552-557
• /
• 2015

Recent performed by recognizing a user's location, various services have been tailored focus on short-range wireless communication technology. A beacon in which is attracting attention as next-generation technology. Beacon is a terminal by utilizing the frequency of the non-audible area can not be bluetooth and human sending and receiving terminals and information, Apple recently iBeacon like a low-power Bluetooth (BLE; bluetooth low energy) based beacon showing a tendency to rise into the mainstream there. Services using a beacon is basically installs the terminal in a certain place indoor. It is characterized by providing the user the services to catch the user's position, even automatically take a separate action. Various types of location-based service provided by the target interior space began to attract attention. A variety of location-based services are provided in the interior space in order to be successfully deployed and provide guidance to the interior space, the movement route and the like are essentially required to build various types of information. In this paper, for efficient indoor positioning by varying the signal strength of the beacon in such areas were measured and analyzed.