• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.11
• /
• pp.3680-3693
• /
• 2022

The handover procedure of IEEE 802.11 wireless local area networks (WLANs) introduces significant delay, which can degrade the quality of service (QoS) especially for delay-sensitive applications. Although studies have been conducted to support handover in SDN-based WLAN, there is no research to reduce the channel scanning procedure that takes up the most delay time in the handover process. The channel scanning procedure is essential to determine the appropriate access point (AP). To mitigate this problem, this paper proposes a SWITCH: SDN-WLAN integrated handover scheme for QoS-Guaranteed mobile service. In SWITCH, each AP periodically broadcasts beacon frames through different channels in a predetermined order that includes the operating channel information of the AP. This allows mobile stations (MSs) to receive the beacon frames of nearby APs, and therefore they can determine the appropriate APs for handover without the channel scanning procedure. By reporting the information of the newly moved AP to the SDN controller, a flow rule is installed in advance to provide fast handover, and packet loss is reduced by buffering data destined for MS. In addition, the proposed scheme can adaptively operate SWITCH to consider the user location and QoS requirement of flow to save radio resource overhead. Performance evaluation results demonstrate that SWITCH can reduce the handover delays, flow table utilization ratio and radio resource overhead while improving the network throughput.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.15-21
• /
• 2011

In the range-based localization, the localization accuracy will be high dependent on the accuracy of distance measurement between two nodes. The received signal strength(RSS) is one of the simplest methods of distance measurement, and can be easily implemented in a ranging-based method. However, a RSS-based localization scheme has few problems. One problem is that the signal in the communication channel is affected by many factors such as fading, shadowing, obstacle, and etc, which makes the error of distance measurement occur and the localization accuracy of sensor node be low. The other problem is that the sensor node estimates its location for itself in most cases of the RSS-based localization schemes, which makes the sensor network life time be reduced due to the battery limit of sensor nodes. Since beacon nodes usually have more resources than sensor nodes in terms of computation ability and battery, the beacon node based localization scheme can expand the life time of the sensor network. In this paper, therefore we propose a beacon node based localization algorithm using received signal strength(RSS) and path loss calibration in order to overcome the aforementioned problems. Through simulations, we prove the efficiency of the proposed scheme.

• Korea Science and Art Forum
• /
• v.31
• /
• pp.21-32
• /
• 2017

Local festivals form the regional cultures and atmosphere of communication; they increase the demand of domestic tourism businesses and thus, have an important role in ripple effects (e.g. regional image improvement, tourist influx, job creation, regional contents development, and local product sales) and economic revitalization. IoT (Internet of Thing) technologies have been developed especially, beacon-one of the IoT services has been applied as plenty of types and forms both domestically and internationally. However, notwithstanding expansion of current digital mobile technologies, it still remains as difficult for the individual to track the information about all the local festivals and to fulfill the tourists' needs of enjoying festivals given the weak strategic approaches and advertisement activities. Furthermore, current festival-related mobile applications don't function well as delivering information and have numerous contents issues (e.g. ways of information delivery within the festival places, independent application usage for each festival, one time usage due to one time event). This research, based on the background mentioned above, aims to develop the local festival mobile application and data analysis system applying beacon technology. First of all, three algorithms were developed, namely, 'festival crowding algorithm', 'visitor stats algorithm', and 'customized information algorithm', and then beta test was followed with the developed application and data analysis system. As a result, they could form the database of visitors' types and behaviors, and provide functions and services, such as personalized information, waiting time for festival contents, and 'hot place' function. Besides, in Google Play store, they also got the titles given with more than 13,000 downloads within first three months and as the most exposed application related with festivals; and, thus, got credited with their marketability and excellence. This research follows this order: chapter 2 shows the literature review of local festival related with technology development, beacon service, and festival application. In Chapter 3, design plans and conditions are described of developing local festival mobile application and data analysis system with beacon. Chapter 4 evaluates the results of the beta performance test to verify applicability of the developed application and data analysis system, and lastly, chapter 5 explains the conclusion and suggests the future research.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1689-1697
• /
• 2018

This paper explored how to design amobile application for Korea's traditional markets based on O2O service and data science technologies. In order to cover a broader scope of customers, diversify the ways to sell products, and increase the profits of Korea's traditional markets, the application bridges online customers with offline stores at traditional markets and augments both convenience and accessibility. Beyond the typical face-to-face interactions between customers and sellers at traditional markets, this application offers mobile payments and personalized recommendations of nearby stores and preferable products using Beacon and datascience technologies. Moreover, it offers multi-language support for foreign customers who are not familiar with Korea's traditional markets and the products sold there. In conclusion, using O2O service, which is a rising trend among prevalent platform technologies, this study proposed a new e-commerce model for Korea's traditional markets to promote market expansion.

• Journal of Satellite, Information and Communications
• /
• v.2 no.1
• /
• pp.35-40
• /
• 2007

COSPAS-SARSAT is the search and rescue system for providing a distress alarm and a position identification using an international satellite and ground facilities. Aviators, mariners and land users worldwide are equipped with COSPAS-SARSAT distress beacons, which could help save their in emergency situations anywhere in the world. As the existing COSPAS-SARSAT system is generally operated by LEO(Low-altitude Earth Orbit) Satellite System, the time from the distress beacon to the rescue is more than 1 hour with average and the accuracy of the distress location is about 5 Km. Therefore, in order to overcome this problem, the development for the next generation SAR(search and rescue) system which uses the MEO(middle-altitude Earth Orbit) satellites is going on the Galileo project. EU is developing this project for the full operation capability in 2011, and this project will have SAR payloads and support to the Search and Rescue service-herein called SAR/Galileo. SAR/Galileo will have the performance of a few meter accuracy, within 10 minutes to rescue from reception of distress messages, and Return Link Service(from the SAR operator to the distress emitting beacon), thereby facilitating more efficient rescue operations and helping to reduce the rate of false alerts. As the disaster is larger every year, the ground station, MEOLUT for next generation ASR/Galileo is urgently needed for the lifesaving for the larger disaster, the research for beacon and the ground station such as MEOLUT for introducing the next generation SAR/Galileo in Korea is very timely and is important. This paper presents the procedures and the strategies for the participation, the area to develop reasonably, and the propulsion organization for developing the SAR/Galileo ground system in Korea.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.807-812
• /
• 2020

In order to prevent the national wide spread of the COVID-19 virus, the government enforces to use an electronic access registration system for public facilities to effectively track and manage the spread. Initially, there was a lot of hassle to write a directory, but recently a system for creating an electronic access list using QR codes, what is called KI-Pass, is mainly used. However, the procedure for generating a QR code is somewhat cumbersome. In this paper, we propose a new electronic access registration system that does not require QR code. This system effectively controls the suspicious visitor by using a mask wearing discriminator which has been implemented using deep learning technology, and a non-contact thermometer package. In addition, by linking the beacon, a short-range wireless communication technology, and the visitor's smartphone application, basic information of the facility visitor is automatically registered to KDCA through the server. On the other hand, the user access information registered in the server is encrypted and stored, and is automatically destroyed after up to 4 weeks. This system is expected to be very effective in preventing the spread of other new infectious diseases as well as responding to the coronavirus which is recording a high spread worldwide.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.6
• /
• pp.113-123
• /
• 2010

In this paper, an efficient network configuration method is proposed for mobile nodes in LR-WPAN (Low Rate Wireless Personal Area Network) based on the IEEE 802.15.4 standard. The proposed MSBS (mobile sensor beacon setup) method can be used to implement a joining procedure by which an improved processing rate can be achieved. This improvement is achieved by using BOP (Beacon only Period). In this method, the performance of mobile nodes is enhanced by using information on depth, traffic, and RSSI (Received Signal Strength Indication). By using the MSBS method, trusted data can be transferred and traffic overloads that occur at specific nodes can be prevented. The information obtained from the mobile nodes in wireless networks is analyzed using the proposed method, in order to study the performance of the method. Simulation results show that the MSBS method can be used to obtain an efficient network configuration according to the mobility of nodes in LR-WPAN.

• KIISE Transactions on Computing Practices
• /
• v.22 no.11
• /
• pp.576-582
• /
• 2016

Currently, every person possesses a smart phone due to the development of the IT industry. However, crosswalk pedestrian accidents have been sharply increasing due to smart phone use. If a traffic light can recognize smart phones when a smart-phone user approaches and arrives at a given sign, many accidents could be reduced by using beacon signals. Before the era of smart phones, the accident rate involving cell phone use was relatively low. Nevertheless, when considering the development of IT equipment that produces a threat to human life, government cannot regulate smart phone use outside. The purpose of this paper is to indirectly warn a smart phone user in order to reduce the accident rates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2541-2546
• /
• 2013

In this paper, we proposed on the azimuth correction method for a line-of-sight data-link tracking antenna system. Tracking antenna system is essential to maintain line-of-sight between moving object and data-link equipment. In order to calculate the azimuth and elevation between the moving object and antenna system, we used GPS data. also to match the each coordinate systems, we used geomagnetic sensor or beacon. However, the geomagnetic disturbance-prone terrain in places difficult to correct calibration. The first step, finds the location of the strongest RF signal, we should remember the difference between the reference point and the detected position of the antenna. The second step, we could communicate each other. And the azimuth angle is calculated by GPS values. Despite the geomagnetic interference, we can correct the azimuth angle quickly and easily.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8C
• /
• pp.667-679
• /
• 2010

The use of femtocells in buildings and homes has been widely studied as a means to enlarge the cell coverage and increase the network capacity of mobile communication systems. Femtocells for Mobile WiMAX (M-WiMAX) using time division duplexing (TDD) requires frame synchronization with neighboring base stations to avoid interference between uplink and downlink signals. In this paper, we propose a new frame synchronization method for femtocell using IEEE 802.11 based wireless backhaul, which transfers the time information of mobile network to femtocells via the beacon signal provided by IEEE 802.11. Also, in order to reduce timing error of the proposed method, we modify the collision avoidance scheme in the transmitter of IEEE 802.11 and apply a timing estimation technique designed in the sense of least squares to the receiver of IEEE 802.11. Through computer simulations using the proposed scheme, we evaluate the performance of frame synchronization for femtocells and show that the recovered timing information satisfies the timing specification defined by M-WiMAX standard.