• Journal of the Korean Chemical Society
• /
• v.57 no.3
• /
• pp.382-388
• /
• 2013

The present paper focuses on the synthesis, characterization and application of nanophotocatalyst for degradation of quinalphos and monocrotophos. Novel heterostructured ZnO/$TiO_2$ photocatalyst ($Z_9T$) was prepared and characterized with X-ray diffraction (XRD), SEM and UV-vis diffuses reflectance spectroscopy. The average crystalline size of synthesized $Z_9T$ was found to be 21.48 nm. The pesticides were degraded in the presence of nanophotocatalysts i.e., $TiO_2$, ZnO, $TiO_2$/ZnO mixed in various proportions and heterostructured nanophotocatalyst synthesized by Sol-Gel method. The batch experiments were performed by adding photocatalyst to 100 ml of pesticide solution and suspension was subjected to irradiation under UV light. In case of mixed catalyst, the maximum degradation of monocrotophos and quinalphos has been observed when ZnO and $TiO_2$ were in the ratio of 7:3 and 8:2 respectively. The degradation efficiency with synthesized heterostructured nanophotocatalyst ($Z_9T$) was found to be comparable with $TiO_2$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.959-962
• /
• 2000

We have fabricated good quality superconducting YBa$_2$Cu$_3$$O_{7-x}$(YBCO) thin films on Hastelloy(Ni-Cr-Mo alloys) metallic substrates with CeO$_2$and BaTiO$_3$buffer layers in-situ by pulsed laser deposition in a multi-target processing chamber. YBCO film with CeO$_2$single buffer layer shows T$_{c}$ of 71.64 K and the grain size less than 0.1${\mu}{\textrm}{m}$. When BaTiO$_3$ is used as a single buffer layer, the grain size of YBCO is observed to be larger than that of YBCO/CeO$_2$by 200 times and the transition temperature of the film is enhanced to be about 84 K. CeO$_2$/BaTiO$_3$double buffer layer has been adopted to enhance the superconducting properties, which results in the enhancement of the critical temperature and the critical current density to be about 85 K and 8.4$\times$10$^4$ A/$\textrm{cm}^2$ at 77 K, respectively mainly due to the enlargement of the grain size of YBCO film.ilm.

• Journal of Distribution Science
• /
• v.18 no.5
• /
• pp.89-98
• /
• 2020

Purpose: The growth of online commerce is now becoming a major threat and a new opportunity for retailers. Existing offline retailers struggle to cope with new online retailers' threats by utilizing offline infrastructure. Besides, online retailers expand their online strengths to offline sales by opening their offline stores. Many retailers are paying close attention to the O2O business and the resulting changes. Thus, this research focuses on the O2O business model and process that retailers can adopt. Research design, data and methodology: Considering the features of products that retailers sell, this paper divides O2O business process with the following criteria: delivery lead-time and delivery area. And This research uses the business model canvas to define the features of O2O commerce business process. This paper also uses nine key elements in the business model canvas for analyzing the structure of O2O commerce business. Results: This paper suggests the delivery model of retailers respond to offline customer orders and summarizes the following results. (1) Considering characteristics such as logistics process, delivery area, and product type, we define the features of O2O business models: wide-area (warehouse) based O2O business model, regional area (store) based O2O business model and time-separated O2O business model. (2) This study checks the availability of the business model through the business cases of O2O business models. (3) This study also analyzes the O2O business model of domestic retail companies by the factors defined in the business model canvas. Conclusions: Retailers can adopt the O2O business process to fit their business requirements and strategy. The online retailers who deal with normal consumer products mainly have the wide-area based O2O business model. The wide-area based O2O business model can be suitable for retailers who manage inventory centrally. The time-separated O2O business model can be a good solution for fresh food retailers to operate the logistics process efficiently. And to shorten the delivery lead-time of fresh foods, the regional area based O2O business model can be fit to the retailer that utilizes its offline logistics or sales infrastructure. It may be much more important for retailers to share the inventory information with other branches and to change the role of offline stores.

• Journal of Environmental Science International
• /
• v.14 no.2
• /
• pp.221-230
• /
• 2005

Catalytic wet oxidation of trichloroethylene (TCE) in water has been conducted using $TiO_2-supported$ cobalt oxides at $36^{\circ}C$ with a weight hourly space velocity of $7,500\;h^{-1}.\;5\%\;CoO_x/TiO_2$, prepared by using an incipient wetness technique, might be the most promising catalyst for the wet oxidation although it exhibited a transient behavior in time on-stream activity. Not only could the bare support be inactive for the wet decomposition reaction, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. XPS spectra of both fresh and used Co surfaces gave different surface spectral features for each $CoO_x,\;Co\;2P_{3/2}$ binding energy for Co species in the fresh catalyst appeared at 781.3 eV, which is very similar to the chemical states of $CoTiO_x$ such as $CO_2TiO_4\;and\;CoTiO_3$. The used catalyst exhibited a 780.3-eV main peak with a satellite structure at 795.8 eV. Based on XPS spectra of reference Co compound, the TCE-exposed Co surfaces could be assigned to be in the form of mainly $Co_3O_4$. XRD patterns for $5\%\;CoO_x/TiO_2$ catalyst indicated that the phase structure of Co species in the catalyst even before reaction is quite comparable to the diffraction lines of external $Co_3O_4$ standard. A model structure of $CoO_x$ present predominantly on titania surfaces would be $Co_3O_4$, encapsulated in thin-film $CoTiO_x$ species consisting of $Co_2TiO_4$ and $CoTiO_3$, which may be active for the decomposition of TCE in a flow of water.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.34-42
• /
• 1996

Growth of synthetic emerald [($(BeO)_3(Al_{2-x}Cr_xO_3)(SiO_2)_6$] single crystals was carried out by flux method. In this study, the starting materials were prepared by stoichiometric mixing of BeO, $Al_2O_3$ and $SiO_2$ as reaching components. The conditions for the growth of synthetic emerald single crystals are as follows : temperature range ; $1150{\sim}900^{\circ}C$, cooling rate ; 2, 4, $10^{\circ}C/hr$, flux ; $Li_2CO_3$, $V_2O_5$, dopant ; $Cr_2O_3$. The sizes of $Cr_2O_3$emerald single crystals depending on 2, 4, $10^{\circ}C/hr$ cooling rates. The obtained emerald single crystal was characterized and the following results were obtained : lattice parameter : a=0.921nm, c=0.917nm, crystal system ; hexagonal, crystal size ; max. $0.80{\times}0.95mm^2(c{\times}m)$, orientation ; (1000), $m(10{\bar{1}}0)$.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2006.06a
• /
• pp.15-30
• /
• 2006

o US environmental regulations are complex o Compliance assesment should be part of an effective environmental management system o Companies must assess and report a dollar value for environmental liabilities o Comprehensive assessment of environmental liability and risk should be conducted for all property transfers aquisitions o Independent external audits provide the highest level of compliance oversight and can assist in assessment of environmental liabilities

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.2
• /
• pp.160-164
• /
• 1999

Subsurface environments, including the intermediate vadose zone and aquifers, may be contributing to increased atmospheric concentrations of $N_2$O. Denitrification appears to be the major source of $N_2$O in the subsurface environment. In the intermediate vadose zone, the level of denitrifying activity is dependent on the soil morphology, particularly stratified layers within the soil profile, which impede water and solute movement and create conditions favorable for denitrification. Movement of organic C from the soil surface appears to support denitrifying activity by providing an energy source and increasing the consumption of $O_2$. Denitrirication and $N_2$O production have been observed in aquifers but appear to be of greatest significance in shallow unconfined aquifers. The lack of organic C, N $O_2$, or anaerobiosis is often a limiting factor for activity but seems to be site specific. The presence of denitrifying bacteria does not appear to be a major limitation, based on published results, but the ubiquity of denitrifiers in subsurface environments needs to be confirmed. The fate of the $N_2$O produced in subsurface environments is unknown. Transport of $N_2$O by up ward diffusion, by outgassing at contacts with surface waters, and by ground water use need to be quantified to determine the contribution to atmospheric $N_2$O. Contamination of subsurface environment with N $O_3$$^{ }$ and organics has the potential for increasing the contribution to atmospheric $N_2$O by enhancing denitrification .

• The Journal of the Petrological Society of Korea
• /
• v.2 no.1
• /
• pp.41-52
• /
• 1993

We report adventages of employing MgO as a differentiation index for the Namwon granitic complex. It is shown to be much more sensitive than the usual Harker index. The complex can be divided into two groups on the basis of $TiO_2$/MgO ratio. The low $TiO_2$/MgO group consists of hornblende biotite tonalite-granodiorite, porphyritic hornblende biotite granodiorite (PHBGd) and part of biotite granite (loBG). PHBGd shows its own distinct variation in the low group. This group is characterized in most cases by the presence of hornblende, even if it occurs as a trace amount. The high $TiO_2$/MgO group consists of part of biotite granite (hiBG) and two mica granite. The major element differences between rock types are also apparent in biotite chemistry. These chemical data indicate that at least two distinct origins of magma are rquired for the complex. Two kinds of biotite granite revealed in this study show distinct geographic distribution, suggesting that a new geologic map should be made.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1546-1549
• /
• 2018

We have investigated core-levels of ZnO thin films at the interface with the graphene on Cu foil using in-situ X-ray Photoelectron Spectroscopy (XPS). Spectral evolution of C 1s, Zn 2p, and O 1s are observed in real time during RF sputtering deposition. We found binding energy (BE) shifts of Zn 2p and 'Zn-O' state of O 1s depending on ZnO film thickness. Core-levels BE shifts of ZnO will be discussed on the basis of electron transfer at the interface and it may have an important role in the electronic transport property of the ZnO/graphene-based electronic device.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.613-618
• /
• 2009

We designed new compositions for lead free and low temperature sealing glass frit of $ZnO-V_2O_5-P_2O_5$ system, which can be used for PDP (Plasma Display Panel) or other electronic devices. The $ZnO-V_2O_5-P_2O_5$ system can be used as a sealing material at temperatures even lower than 430$^{\circ}C$. This system, however, showed lower bonding strength with glass substrate compared to commercialized Pb based sealing materials. So, we added $TiO_2$ as a promoter for bonding strength. We examined the effect of $TiO_2$ addition on sealing behaviors of $ZnO-V_2O_5-P_2O_5$ glasses with the data for flow button, wetting angle, temporary & permanent residual stress of glass substrate, EPMA analysis of interface between sealing materials and glass substrate, and bonding strength. As a result, sealing characteristics of $ZnO-V_2O_5-P_2O_5$ system glasses were improved with $TiO_2$ addition, but showed a maximum value at 5 mol% $TiO_2$ addition. The reason for improved bonding characteristics was considered to be the chemical interaction between glass substrate and sealing glass, and structural densification of sealing glass itself.