• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.588-596
• /
• 1994

A decomposition reaction of bauxite ore with $(NH_4)_2SO_4$ was investigated to prepare Al component pregnant solution for the direct product of high purity $Al_2O_3$ from low grade bauxite ore. Al component in the bauxite was sulfatized to $NH_4Al(SO_4)_2$ or $Al_2(SO_4)_3$ in this decomposition. The optimum conditions of the decomposition for bauxite ore were reaction temperature of $425^{\circ}C$, reaction time of 40min, $(NH_4)_2SO_4$ weight ratio to bauxite of 7.0 and particle size of bauxite ore of -200mesh. The optimum leaching conditions of sulfated bauxite ore were leaching temperature of $100^{\circ}C$, leaching time of 1hr and pulp density of 200ml $H_2O$ to sulfated ore of 1.0g bauxite. Under the above mentioned decomposition and leaching conditions, 94% of Al component in the bauxite ore was extracted.

• Journal of Energy Engineering
• /
• v.27 no.3
• /
• pp.41-47
• /
• 2018

Bauxite is the principal raw material to produce alumina. Bauxite mining industry has grown gradually due to the rising demand for alumina. U.S Geological Surveys (USGS 2018) estimates the world's reserves of bauxite roughly 55-75 billion tonnes. Vietnam holds up to 3.7 billion tonnes, the third after Guinea and Australia. Most of bauxite reserves are located in Tay Nguyen (Central Highlands), and have only been minimally mined to date. The approved master plan in 2007 of the Government of Vietnam licenses bauxite mining and alumina production projects in Central Highlands through six projects until 2025. These projects constitute many potentially enormous economic, social and environmental impacts.

• Journal of the Korean Ceramic Society
• /
• v.27 no.6
• /
• pp.747-754
• /
• 1990

Aluminum hydrate gels were prepared from the mixtures of bauxite and ammonium sulfate by wet acid process. Optimum conditions for obtaining the maximum yield( 99%) of aluminum hydrates from the same amount of bauxite were confirmed as follows ; 1. Mixing ratio ; addition of 25mole% of ammonium sulfate to 1mole of bauxite. 2. Calcination ; heated at 350℃ for 1hr. 3. Extraction ; leached at 95℃ in 1% H2SO4 for 90min. 4. pH of precipitating solution; slight below 7.0. Amorphous aluminum hydrates were precipitated at the pH lower than 8.5, but the precipitates crystallized to bayerite at the pH was 10. Mean diameter of α-Al2O3 powders which were obtained by calcining the aluminum hydrates was below 0.2㎛, and EDS analysis revealed than SiO2 was it's primary impurity.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.3-12
• /
• 2023

Bauxite residues represent industrial wastes that have been accumulating over the past 120 years since the beginning of the alumina industry. They are typically classified as harmful substances owing to their strong alkalinity and salinity characteristics. These residues, with quantities steadily increasing by more than 150 million tons annually worldwide, are recycled into various industrial materials using dealkalization processing. This study investigates the generation process of alkaline substances in bauxite smelting and the recent techniques adopted for controlling their alkalinity. The properties of bauxite residues are known to vary depending on the raw mining and digestion methods. Thus, the dealkalization process must be selected considering the type of alkaline material, local environment, and infrastructure.

• Clean Technology
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2012

In this study, aluminum hydroxide ($Al(OH)_3$) was synthesized by Bayer process and sodium contained in $Al(OH)_3$ was removed with the acid solution such as HCl and acetic acid for the synthesis of high purity alumina. The bauxite produced in Queensland of Australia was used for the production of alumina by Bayer, and was crushed to a particle size of below 10 um by attrition mill. The crushed bauxite was treated in sodium hydroxide solution of 5 N for the elution of aluminum component. The elution of aluminum from bauxite was carried out at $140^{\circ}C$ and 3.4 atm in autoclave. The sample solution was separated to the red mud and liquid solution by filter paper. The elution of aluminum from bauxite was confirmed with changing a structure and aluminum content in both bauxite and red mud analyzed by XRD and EDX. Aluminum contained in the separated solution was crystallized to $Al(OH)_3$ with the addition of aluminum hydroxide used as the seed material. $Al(OH)_3$ powder obtained during the crystallization process was purified by several times washing with distillated water. It was also confirmed that the sodium remained in $Al(OH)_3$ powder is removed with acid solution. The purity of $Al(OH)_3$ powder produced in this study was 99.3% and the content of sodium was reduced to approximately 0.009% after the acid treatment.

• Journal of the Korean Ceramic Society
• /
• v.44 no.6 s.301
• /
• pp.331-337
• /
• 2007

High temperature reaction behaviors of various oxide materials (such as bauxite, pyrophyllite, mullite and fused silica powders) used in the refractory materials for tap-hole plugging of blast furnace were investigated with varying temperature in the carbon surrounding. Kinetics of carbothermal reduction of $SiO_2$ for forming SiC with high corrosion resistance were strongly dependent on it's crystalline phase. SiC generation yield increased with increasing catalyst amount in oxide regardless of generated SiO gas amount at temperature of $<1500^{\circ}C$. However, in case of fused silica over $1500^{\circ}C$, SiC generation yield was dominantly influenced by SiO amount without catalyst effect. Bauxite showed the most effective carbothermal reduction reaction, since bauxite have a large amount of catalyst and well-dispersed $SiO_2$ phase in oxide matrix.

• International Journal of Computer Science & Network Security
• /
• v.22 no.6
• /
• pp.91-96
• /
• 2022

The photocatalytic degradation of salicylic acid takes place in several stages involving coupled phenomena, such as the transport of molecules and the chemical reaction. The systems of transport equations and the photocatalytic reaction are numerically solved using COMSOL Mutiphysics (CM) simulation software. CM will make it possible to couple the phenomena of flow, the transport of pollutants (salicylic acid) by convection and diffusion, and the chemical reaction to the catalytic area (bauxite or TiO2 doped by nanoparticles). The simulation of the conversion rate allows to correctly fit the experimental results. The temporal simulation shows that the reaction reaches equilibrium after a transitional stage lasting over one minute. The outcomes of the study highlight the importance of diffusion in the boundary layer and the usefulness of injecting micro-agitation into the microchannel flow. Under such conditions, salicylic acid degrades completely.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.4
• /
• pp.313-318
• /
• 2013

• Magazine of RCR
• /
• v.12 no.4
• /
• pp.22-27
• /
• 2017

• Magazine of RCR
• /
• v.12 no.4
• /
• pp.28-33
• /
• 2017