• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.662-671
• /
• 2012

Plug-in hybrid electric vehicles (PHEVs) will be widely used in future transportation systems to reduce oil fuel consumption. Therefore, the electrical energy demand will be increased due to the charging of a large number of vehicles. Without intelligent control strategies, the charging process can easily overload the electricity grid at peak hours. In this paper, we consider a smart charging and discharging process for multiple PHEVs in a building's garage to optimize the energy consumption profile of the building. We formulate a centralized optimization problem in which the building controller or planner aims to minimize the square Euclidean distance between the instantaneous energy demand and the average demand of the building by controlling the charging and discharging schedules of PHEVs (or 'users'). The PHEVs' batteries will be charged during low-demand periods and discharged during high-demand periods in order to reduce the peak load of the building. In a decentralized system, we design an energy cost-sharing model and apply a non-cooperative approach to formulate an energy charging and discharging scheduling game, in which the players are the users, their strategies are the battery charging and discharging schedules, and the utility function of each user is defined as the negative total energy payment to the building. Based on the game theory setup, we also propose a distributed algorithm in which each PHEV independently selects its best strategy to maximize the utility function. The PHEVs update the building planner with their energy charging and discharging schedules. We also show that the PHEV owners will have an incentive to participate in the energy charging and discharging game. Simulation results verify that the proposed distributed algorithm will minimize the peak load and the total energy cost simultaneously.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.71-80
• /
• 2015

LDO(Low Drop-Out) regulators have become an essential building block in modern PMIC(Power Managment IC) to extend battery life of electronic devices. In this paper, we optimize capacitor-less LDO regulator via Geometric Programming(GP) designed using Dongbu HiTek $0.5{\mu}m$ BCDMOS process. GP-compatible models for stability and PSR of LDO regulators are derived based on monomial formulation of transistor characteristics. Average errors between simulation and the proposed model are 9.3 % and 13.1 %, for phase margin and PSR, respectively. Based on the proposed models, the capacitor-less LDO optimization can be performed by changing the PSR constraint of the design. The GP-compatible performance models developed in this work enables the design automation of capacitor-less LDO regulator for different design target specification.

• Journal of the Korean Dietetic Association
• /
• v.13 no.3
• /
• pp.240-249
• /
• 2007

The objective of this study was to investigate the relation of serum calcium level, body mass index(BMI) with bone status expressed as broadband ultrasound attenuation(BUA) measured by quantitative ultrasound (QUS) and the occurrence of osteopenia among adult men and women. Two hundred eleven(63 male and 148 female) workers who worked in 4 different battery factories were recruited from March 2005 to October 2005. BUA was used as a surrogate of bone mineral density and measured at left calcaneous bone area. The BUA value transformed into T-score by WHO standard conversion criteria to determine osteopenia (-2.5

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.232-235
• /
• 2015

In recent years, mobile devices are equipped with functionalities comparable to those computers. However, mobile devices have limited resources due to constraints, such as low processing power, limited memory, unpredictable connectivity, and limited battery life. To enhance the capacity of mobile devices, an interesting idea is to use cloud computing and virtualization techniques to shift the workload from mobile devices to a computational infrastructure. Those techniques consist of migrating resource-intensive computations from a mobile device to the resource-rich cloud, or server (called nearby infrastructure). In order to achieve their goals, researchers designed mobile cloud applications models (examples: CloneCloud, Cloudlet, and Weblet). In this paper, we want to highlight on cloudlet architecture (nearby infrastructure with mobile device), its methodology and discuss about the impact of distance between cloudlet and mobile device in our work design.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.283-289
• /
• 2010

Owing to the increasing worldwide interest in green technology and renewable energy sources, flywheel energy storage systems (FESSs) are gaining importance as a viable alternative to traditional battery systems. Since the energy storage capacity of an FESS is proportional to the principal mass-moment of inertia and the square of the running speed, a design that maximizes the principal inertia while operatingrunning at the highest possible speed is important. However, the requirements for the stability of the system may impose a constraint on the optimal design. In this paper, an optimal design of an FESS that not only maximizes the energy capacity but also satisfies the requirements for system stability and reduces the sensitivity to external disturbances is proposed. Cross feedback control in combination with a conventional proportional-derivative (PD) controller is essential to reduce the effect of gyroscopic coupling and to increase the stored energy and the specific energy density.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.319-323
• /
• 2011

In this paper presents a new model of dual-mode synchronous buck converter with dynamic control for mobile applications was proposed. The proposed circuit can operate at 2.5MHz with supply voltage 2.5V to 5V for low ripple and minimum inductor and capacitor size, which is suitable for single-cell lithium-ion battery supply mobile applications. For high efficiency, the proposed circuit adopts synchronous type and dynamic control. The proposed circuit is designed by using the device parameter of TSMC 0.18um BCD process and the performance is evaluated by Cadence spectre. Experimental board level results show the maximum conversion efficiency is 96% at 100mA load current.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.4
• /
• pp.405-418
• /
• 2014

Fuel cells are suitable for a power plant of a unmanned aerial vehicle (UAV) as it is not only environmentally friendly and quiet but also more efficient than an internal combustion engine. A fuel cell hybrid UAV has better performance in endurance than a fuel cell only or battery only UAV. One of the key purposes of making fuel cell hybrid UAVs is having long endurance and now maximum 26 hours of flight is possible. Because optimal design and control methods for fuel cell hybrid UAVs are absolutely needed for their long endurance we have to check the methods. The aircraft made by using application-integrated design method has less BOP mass and better performances. The optimal design and control methods are generally based on computer simulations or Hardware-In-The-Loop simulations by using dynamic models for their design and control. The Hardware-In-The-Loop simulation (HILS) is to use a hardware device like a fuel cell stack as well as a simulation program and it allows for making optimally designed applications. This paper introduce efficient methods of design, control and evaluation for the fuel cell hybrid UAVs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.311-320
• /
• 2006

This paper proposes DDTM for USN having end-point mobility. The existing network protocols did not consider target's and sink's mobility. So it requires flooding and path update whenever targets or sinks move. This can lead to drain battery of sensors excessively and decrease lifetime of USN. DDTM is the protocol based on TTDD considering sink's mobility. TTDD provides sink's mobility efficiently by using the grid structure, but it requires the high energy because of reconstructing the grid structure whenever targets move. In this way, the proposed protocol can decrease a consumption of energy, since it reuses the existing grid structure of TTDD, if the target moves in local cell. We compare DDTM with TTDD under the total message and the energy consumption by using a discrete analytical model for cost analysis. Analytical results demonstrated that our proposed protocol can provide the higher efficiency on target's mobility.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.3B no.3
• /
• pp.147-154
• /
• 2003

This paper presents a high-frequency boost type ZVS-PWM chopper-fed DC-DC power converter with a single active auxiliary edge-resonant snubber at the load stage which can be designed for power conditioners such as solar photovoltaic generation, fuel cell generation, battery and super capacitor energy storages. Its principle operation in steady-state is described in addition to a prototype setup. The experimental results of boost type ZVS-PWM chopper proposed here, are evaluated and verified with a practical design model in terms of its switching voltage and current waveforms, the switching v-i trajectory and the temperature performance of IGBT module, the actual power conversion efficiency, and the EMI of radiated and conducted emissions, and then discussed and compared with the hard switching scheme from an experimental point of view. Finally, this paper proposes a practical method to suppress parasitic oscillation due to the active auxiliary resonant switch at ZCS turn-off mode transition with the aid of an additional lossless clamping diode loop, and can be reduced the EMI conducted emission.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2671-2676
• /
• 2015

Nowadays, Mobile devices are now capable of supporting a wide range of applications. Unfortunately, some of applications demand an ever increasing computational power and mobile devices have limited resources due to their constraints, such as low processing power, limited memory, unpredictable connectivity, and limited battery life. To deal with mobile devices' constraints, researchers envision extending cloud computing services to mobile devices using virtualization techniques to shift the workload from mobile devices to a powerful computational infrastructure. Those techniques consist of migrating resource-intensive computations from a mobile device to the resource-rich cloud, or server (called nearby infrastructure). In this paper, we want to highlight on cloudlet architecture (nearby infrastructure with mobile devices), its functioning and in our future work, analyze effects of distance between cloudlet and mobile devices.