• 한국응용과학기술학회지
• /
• 제25권2호
• /
• pp.211-218
• /
• 2008

The performance of positive plates depends on the structure of the lead dioxide active mass. The positive active materials (PAM) consists of a skeleton, built up of agglomerates and macropores. Agglomerates, in their turn, comprise particles and micropores. This paper described a study conducted to determine the effects of different soaking times between the acid fill and formation stages of the tubular plate production. For the positive plates a lead oxide were filled into tubular bag with a red lead. After filling the positive plates were soaked in $H_2SO_4$ solution. X-ray diffraction(XRD), scanning electron microscopy(SEM) and electrical testing had been used to study the compositional and morphological aspects of the positive active material(PAM) just prior and after formation. Results indicate that PAM compositions were effected by the soaking time and acid density of $H_2SO_4$ solution. It can be seen that as the soaking time duration increases, $\alpha$-PbO, $Pb_3O_4$, and Pb were all gradually sulphating. Composition of 3BS reached a maximum at around 3 h duration and $H_2SO_4$ of sp. gr. 1.10 on soaking. This results would suggest that the most beneficial conditions for soaking were the $H_2SO_4$ of sp. gr. 1.10 and 2 to 6 h of soaking.

• 전기화학회지
• /
• 제22권1호
• /
• pp.13-21
• /
• 2019

프러시안 블루 유사체(Prussian blue analogue; PBA)는 두 종류의 전이금속이 시안화물 리간드와의 배위결합을 통해 서로 연결되어 만들어진 구조체이다. PBA는 넓은 골격구조를 통해, 다양한 이온의 가역적 삽입/탈리를 가능하게 할 뿐 아니라, 두 종류의 전이금속이 반응하여 높은 비용량을 구현한다. 또한, PBA는 상온에서 수용액 상에서의 공침반응을 통해 합성 되기에, 경제적이며 친환경적으로 생산된다. 하지만, 결정의 형성이 빠르게 진행되며, 수용액 상에서 발생하기에 결정 내 공공격자결함(Vacancy)과 결정수(Crystal water)가 발생하기 쉬우며, 이는 전기화학적 성능에 영향을 미친다. 따라서 이러한 공공격자결함 및 결정수의 생성 억제를 통해 PBA의 전기화학성능 향상에 대한 연구가 활발하게 진행되고 있다. 공공격자결함의 경우 반응속도 제어를 통해 합성단계에서 제어 되며, 결정수는 합성 후 진공 열처리 및 산화제와 복합체 형성을 통해 제거할 수 있다. 뿐만 아니라 PBA의 구조 내에 비활성 전이금속 도핑을 통해 상기 결함들로 인해 PBA가 전기화학 반응 중에 겪는 구조적 불안정성을 해소할 수 있다.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.155-161
• /
• 2002

전도성 혹은 비전도성 지지체에서 전기변색이 가능한 수 nm에서 수액 nm 두께의 금속 니켈 박막 형성에 대한 연구를 수행하였다. 광학렌즈나 혹은 LCD에 사용되는 ITO, 실리콘 웨이퍼에 박막 형성에 대한 연구는 다양한 두께의 니켈 박막은 자체로서의 응용 가능성 뿐 아니라, 광전기화학 소자, 특히 선글라스로 대변되는 변색 소자에의 응용 가능성이 아주 크다. 이러한 소자들은 나노 기술 응용과 양자점의 응용 등으로 경박단소형의 렌즈나 전지, 유리 그리고 태양 선지 등에 응용이 가능하다. 전기화학적으로 니켈 금속을 ITO 유리위에 코팅한 후, AFM, XRD을 이용하여 미세구조를 확인하고, 순환전압전류법, 시간대전류법, 임피던스를 이용하여 이들의 전기화학적 박막 특성을 조사하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1483-1490
• /
• 2011

The protection effect of a $ZrO_2$ coating layer on a $LiCoO_2$ thin film was characterized. A wide and smooth $LiCoO_2$ thin film offers sufficient opportunity for careful observation of the reaction at the interface between cathode (coated and uncoated) and electrolyte. The formation of a $ZrO_2$ coating on a $LiCoO_2$ thin film was confirmed by secondary ion mass spectrometry. Scanning electron and atomic force microscopy were used to characterize the surface morphologies of coated and uncoated films before and after cycling. A $ZrO_2$-coated $LiCoO_2$ film showed a higher discharge capacity and rate capability than an uncoated film. This may be associated with a surface protection effect of the coating. The surface of a pristine film was damaged during cycling, whereas the coated film maintained a relatively clear surface under the same measurement conditions. This result clearly demonstrates the protection effect of a $ZrO_2$ coating on a $LiCoO_2$ thin film.

• International Journal of Advanced Culture Technology
• /
• 제8권1호
• /
• pp.135-140
• /
• 2020

The main battlefield of 'made in China 2025' proposed by the Chinese government is the deep integration of industrialization and informatization, among which intelligent manufacturing and new energy vehicles are the key links. New energy vehicle refers to the use of unconventional automotive fuel as a power source (or use conventional automotive fuel, the use of new vehicle-mounted power plant), integrated vehicle power control and driving aspects of advanced technology, the formation of advanced technical principles, with new technology and the structure of the vehicle. BYD's success in the battery, I T and automobile industries has attracted the attention of the industry, making it a shining new star in the Chinese business community. BYD 's innovation, diversification and corporate culture construction have certain enlightenment to the development of China's small and medium-sized enterprises. Therefore, by looking at the Chinese network literature, about BYD's research mainly focused on the development strategy, corporate finance, corporate performance, and corporate marketing, etc. This paper will take BYD as the research object and focus on corporate culture. Through literature analysis and qualitative analysis, it will summarize and further analyze the unique corporate culture of BYD, its important role, and provide relevant theoretical references for the construction and development of corporate culture in other industries.

• 한국환경성돌연변이발암원학회지
• /
• 제21권1호
• /
• pp.34-43
• /
• 2001

Di-2-ethylhexyl phthalate (DEHP) is the most commonly used phthalate ester in polyvinyl chloride formulations including food packing and storage of human blood. DEHP is a well known as non-genotoxic carcinogen and endocrine disrupting chemical (EDC). DEHP have shown all negative results in ICH-guildeline recommended standard genotoxicity test battery. In this study, to assess the clastogenic and DNA damaging effect in human-derived tissue specific cells, DEHP was treated in human derived MCE-7 cells, HepG2 cells, LNCap cells, BeWo cells, MCE-10A cells, and female peripheral blood cells using micronucleus assay and in human breast carcinoma MCF-7 cells up to $1.28$\times$10^{-2}$ M using Comet assay. The in vitro micronucleus assay is a mutagenicity test system for the detection of chemicals which induce the formation of small membrane bound DNA fragment i.e. micronuclei in the cytoplasm of interphase cells, originated from clastogenic and/or aneugenic mechanism. The single cell gel electrophoresis assay (Comet assay) is used to detect DNA strand-breaks and alkaline labile site. In our results, DEHP increased significantly and/or dose-depentently and time-dependently micronucleus frequency at the 6 and 24 hr without metabolic activation system only in MCE-7 cells. DEHP treated with 2 hrs in MCF-7 cells using Comet assay induced DNA damage dose-depentantly.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권4호
• /
• pp.665-683
• /
• 2011

Wireless sensor networks (WSN) consist of a large amount of sensor nodes distributed in a certain region. Due to the limited battery power of a sensor node, lots of energy-efficient schemes have been studied. Clustering is primarily used for energy efficiency purpose. However, clustering in WSNs faces several unattained issues, such as ensuring connectivity and scheduling inter-cluster transmissions. In this paper, we propose a location-based spiral clustering (LBSC) algorithm for improving connectivity and avoiding inter-cluster collisions. It also provides reliable location aware routing paths from all cluster heads to a sink node during cluster formation. Proposed algorithm can simultaneously make clusters in four spiral directions from the center of sensor field by using the location information and residual energy level of neighbor sensor nodes. Three logical addresses are used for categorizing the clusters into four global groups and scheduling the intra- and inter-cluster transmission time for each cluster. We evaluated the performance with simulations and compared it with other algorithms.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.35.3-36
• /
• 2008

The ground-based spacecraft simulator is a useful tool to realize various space missions and satellite formation flying in the future. Also, the spacecraft simulator can be used to develop and verify new control laws required by modern spacecraft applications. In this research, therefore, Hardware-in-the-loop (HIL) simulator which can be demonstrated the experimental validation of the theoretical results is designed and developed. The main components of the HIL simulator which we focused on are the thruster system to attitude control and automatic mass-balancing for elimination of gravity torques. To control the attitude of the spacecraft simulator, 8 thrusters which using the cold gas (N2) are aligned with roll, pitch and yaw axis. Also Linear actuators are applied to the HIL simulator for automatic mass balancing system to compensate for the center of mass offset from the center of rotation. Addition to the thruster control system and Linear actuators, the HIL simulator for spacecraft attitude control includes an embedded computer (Onboard PC) for simulator system control, Host PC for simulator health monitoring, command and post analysis, wireless adapter for wireless network, rate gyro sensor to measure 3-axis attitude of the simulator, inclinometer to measure horizontality and battery sets to independently supply power only for the simulator. Finally, we present some experimental results from the application of the controller on the spacecraft simulator.

• 자원리싸이클링
• /
• 제20권6호
• /
• pp.56-62
• /
• 2011

지르코늄은 우수한 내식성과 낮은 중성자 흡수단면적로 인해 원자로에서 구조재로 사용된다. 수용액의 pH에 따른 지르코늄을 함유한 화학종의 농도분포와 용해도의 변화를 구했다. 염산과 질산용액에서 지르코늄이온의 착물형성반응을 고려하여 무기산의 농도에 따른 농도분포를 해석하였다. 질산용액에서 Cyanex272에 의한 지르코늄 추출에 관한 문헌자료를 이용하여 지르코늄과 질산이온간의 Bromley매개변수를 구했다. 이와 같이 구한 매개변수값은 등온추출곡선의 계산이나 하프늄과의 분리인자 예측에 활용될 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2304-2308
• /
• 2010

A $LiNi_{0.8}Co_{0.15}Al_{0.05}O_2$ (LNCAO/C) active material composite cathode was coated with carbon. The conductive carbon coating was obtained by addition of surfactant during synthesis. The addition of surfactant led to the formation of an amorphous carbon coating layer on the pristine LNCAO surface. The layer of carbon coating was clearly detected by FE-TEM analysis. In electrochemical performance, although the LNCAO/C showed similar capacity at low C-rate conditions, the rate capability was improved by the form of the carbon coating at high current discharge state. After 40 cycles of charge-discharge processes, the capacity retention of LNCAO/C was better than that of LNCAO. The carbon coating is effectively protected the surface structure of the pristine LNCAO during Li insertion-extraction.