• Journal of the Korean Electrochemical Society
• /
• v.2 no.1
• /
• pp.1-4
• /
• 1999

A lithium ion battery with polymer electrolyte is expected as a safe and long cycle life battery. This paper reports primarily the recent development results of a solid polymer electrolyte, which is a key factor of the secondary battery system, that has been obtained during the process of the development of a polymer type lithium battery. As a successful result of the solid polymer electrolyte. The ionic conductivity of the solid polymer electrolyte, which is composed of polyacrylonitrile and $LiClO_4\;with\; Al_2O_3$ dissolved as the supporting electrolyte, has been confirmed to be $2.3\times10^{-4} S/cm$ at room temperature.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.193-195
• /
• 2008

This paper proposed dc-dc converter with continuous output current for battery charger. If we charge energy storage device by conventional boost converter, current flows into the discontinuous and as a result reduces the life-time of battery. The output voltage of dc-dc converter should be higher than voltage of across the battery, specially if charging by PV there is a fluctuation of voltage due change of insolation and temperature, therefore will boost and regulate this voltage. The proposal converter includes forward converter and the output voltage of the proposal converter looks like an input voltage and forward output voltage's add. This topology was tested on simulation and experimentation. Simulation and experimentation results indicated that the proposal topology is useful for battery charging because the output current of the converter flows continuously and perfectly.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.6
• /
• pp.1191-1200
• /
• 2023

The lithium ion battery has applied to various fields of energy storage systems such as electric vehicle and potable electronic devices in terms of high energy density and long-life cycle. Despite of various research on the electrode and electrolyte materials, there is a lack of research for investigating of the binding materials to replace polymer based binder. In this study, we have investigated petroleum pitch/polymer composite with various ratios between petroleum pitch and polymer in order to optimize the electrochemical and physical performance of the lithium-ion battery based on petroleum pitch/polymer composite binder. The electrochemical and physical performances of the petroleum pitch/polymer composite binder based lithium-ion battery were evaluated by using a charge/discharge test, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and universal testing machine (UTM). As a result, the petroleum pitch(MP-50)/polymer(PVDF) composite (5:5 wt % ratio) binder based lithium-ion battery showed 1.29 gf mm^-1 of adhesion strength with 144 mAh g^-1 of specific dis-charge capacity and 93.1 % of initial coulombic efficiency(ICE) value.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.145.1-145.1
• /
• 2010

현재 운송수단의 주 동력원으로 사용되고 있는 내연기관은 연료로 사용되는 석유로부터 온실가스가 발생하기 때문에 지구 환경악화의 주범으로 작용하기 때문에 교토 의정서에 의해 많은 제재를 받고 있으며, 이 문제를 해결하기 위해서 다양한 종류의 하이브리드 제품으로 대체하고자 하는 연구개발이 세계 각국에서 활발히 진행되고 있다. 한국은 저탄소 녹색성장이라는 기치하에 2012년 까지 2000만대의 자전거 보급과 세계3대 자전거 생산국으로 발전한다는 비전을 제시하여 향후 자전거 산업이 비약적으로 발전할 것으로 예상되고 있다. 이와 같은 비전을 달성하기 위해서는 저가이면서 출력이 크고 수명이 긴 축전지의 개발이 필수적이며, 이와 더불어 축전지의 성능 발휘를 위해서 이것을 제어할 수 있는 battery management system(BMS)의 개발도 같이 이루어져야 한다. 리튬 배터리의 성능이 우수한 것은 익히 알려진 사실이지만, 고가이기 때문에 소비자들의 부담이 적지 아니하다. 따라서 혁신적인 기술이 개발되어 저가의 배터리를 사용하기 전까지는 납축전지도 같이 사용될 것이며, 본 과제에서는 이와 같은 납 축전지의 수명을 연장시킬 수 있는 BMS를 개발하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.2
• /
• pp.171-178
• /
• 2013

This paper discusses to conduct experimental verification of two types of micro electric vehicles (EV) in order to realize improvement in electric mileage and shorten a charging time of the battery. First, electric double layer capacitor (EDLC) systems to use as a secondary battery are proposed. The internal resistance of EDLC is small compared with a rechargeable battery, and it is suitable for momentary charge-discharge of EV. Next, control circuits of the capacitors to increase the regenerative electric power are utilized. Then, a novel method to charge a main battery of the EV is introduced. Finally, experimental results demonstrate the validity of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.308-311
• /
• 2001

Most of the battery charger for electric powered forklift truck are controlled by the method of 3-phased constant current and constant voltage. However, these chargers have several disadvantages like a large charger capacity, and a short battery life time. This paper presents a digital type battery charger based on multi-mode control adding a constant power control and several assistant controls in the conventional control. The whole control system is performed by a low cost one-chip micro-controller and completely digitize. So we can get a high precision control and a good reliability.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.8
• /
• pp.40-48
• /
• 2015

In this paper, battery charging and discharging circuit with a single voltage power supply is proposed. The proposed circuit has the separated current path and charging-monitoring sequence control scheme. In the charging sequence, the proposed 2-level comparator combined with control signal of the micro-processor can control the constant charging current to protect the over current of the battery. Furthermore, the proposed circuit uses a periodic main power switch control to detect the discharging characteristics to estimate the approximated battery life-time. In the experiments, the proposed emergency power supply for emergency call system has 89% efficiency with 98% power factor. And the proposed sequence control scheme is well operated in the designed emergency power system.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.401-402
• /
• 2014

State of Charge (SOC) and State of Health (SOH) are the key issues for the application of Absorbent Glass Mat (AGM) type battery in Idle Start Stop (ISS) system which is popularly integrated in Electric Vehicles (EVs). However, battery parameters strongly depend on SOC, current rate and temperature and significantly change over the battery life cycles. In this research, a novel method for SOC, SOH estimation which combines the Auto Regressive with external input (ARX) method using for online parameters prediction and Dual Extended Kalman Filter (DEKF) algorithm considering hysteresis is proposed. The validity of the proposed algorithm is verified by the simulation and experiments.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.314-320
• /
• 2024

Lithium dendrite formation is one of the most significant problems with lithium metal batteries. The lithium dendrite reduces the lithium metal batteries' cycling life and safety. To apply consistent external pressure to a lithium metal pouch cell, we design a press jig in this study. External pressure creates dense lithium morphology by preventing lithium dendrite formation. After 300 cycles at 1 C, the cells with the external pressure perform far better than the cells without it, with a cycling retention of 97.8%. The formation of stable lithium metal is made possible by external pressure, which also enhances safety and cyclability.

• Journal of Ceramic Processing Research
• /
• v.23 no.6
• /
• pp.766-769
• /
• 2022

A Battery capacitor was prepared by controlling the mixing ratio of positive materials of the positive electrode to optimize cellproperties. The positive electrode was made by mixing two types of LiNi0.6Mn0.6Co0.2O2 (NMC 622) and LiCoO2 (LCO), andthe electrode was fabricated by changing the ratio of the two positive materials. Increasing of the content of LCO, decreasedthe capacity, and the retention of discharge capacity as a function of current rates did not change remarkably with anincreasing of the content LCO on the mixing ratio of positive materials. The life characteristics showed the highest capacityretention rate compared to the initial period under the condition that the ratio of NCM and LCO was 66 to 20. These resultsclearly indicate that mixing ratio of positive materials affects the electrochemical performances of battery capacitor.