• Korean Journal of Materials Research
• /
• v.11 no.10
• /
• pp.820-832
• /
• 2001

In order to obtain the basic data on the optimum conditions of electroforming process for fabricating the micro wiring pattern for plate type micro- motor core, characteristics of plating bath and properties of deposits were studied with various copper plating baths which contain sulfate, fluoborate, pyrophosphate and cyanide salt, respectively. Cathodic polarization, throwing power, internal stress, texture and surface morphology of deposits were observed. Throwing power of plating solution is deeply related to the polarization curves and the values are in the range of +20∼20%. The order of values ate as follows- pyrophosphate, cyanide, sulfate and fluoborate bath. Internal stresses of deposits are tensile in all of the copper plating bath. Thickness of the deposits plated at the center of holes has the highest value in the pyrophosphate bath and K factor, ratio of height and width of deposit, is 1.44. It was confirmed that the pyrophosphate bath was the best one for the electroforming of wire pattern.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.5
• /
• pp.423-429
• /
• 2001

PbS, CuS and (Pb,Cu)S thin films were chemically deposited on glass from alkaline baths containing lead acetate, copper chloride, thiourea and triethanolamine. The deposition, optical, resistivity and thermal electric properties of these films were studied. PbS thin films showed a hexagonal structure and CuS thin films showed amorphous. The crystalline of (Pb,Cu)S thin films was obtained by heat treatment at 200$\^{C}$ and the deposition ratio of Pb to Cu showed 7:3. The energy gap of PbS, CuS and (Pb,Cu)S thin films were 1.7, 2.1 and 2.4 eV, respectively. Sheet resistance of PbS thin films was less affected on thermal annealing, but hose of (Pb,Cu)S and CuS thin films were more reduced about 3 orders of magnitude. All of those thin films indicated p type semiconductor in temperature ranging 30$\^{C}$ to 150$\^{C}$.

• Journal of Surface Science and Engineering
• /
• v.30 no.1
• /
• pp.3-12
• /
• 1997

The composition, the preferred orientation and the magnetic properties of the CoFeCu alloys electrodepositen under various electrolysis conditions in sulfate baths ware investigated. As the D.C. current density increased, the Co content in alloy electrodeposits increased, while the Cu content decreased and Fe content remained content. The effect of magnetic field up to 300 Oe on the composition of alloys was negligible. The Cu content of the alloys deposited in pulse current increased noticeably with increasing off-time, while the Co and Fe content decreased. The coercivity of the alloys with 3.5 to 7.0wt.% Cu was 1.0 to 2.0 Oe, but increased noticeably above and below that composition. The application of magnetic field during deposition decreased the coercivity of alloys. The saturation flux density of the alloys with 3.5 to 5.0wt.% Cu was relatively high in the range from 16 to 20.7Gauss. The anisotropy field(HK) of the alloys deposited under the magnetic field(50∼300 Oe) ranged from 18 to 22 Oe. The alloys had fcc structure with (111) preferred orientation, whose distribution increased a little with increasing magnetic field.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.86-91
• /
• 2011

Thermal design was conducted for a solar thermal storage system in a medium-temperature range between $200^{\circ}C$ and $400^{\circ}C$. The system was composed of heat pipes as heat carrier and molten salts as phase-change storage material. Each heat pipe penetrated through the storage system and had two heat-exchanging sections at both ends to interact with high-and low-temperature steams, while it exchanged heat with molten salts in the middle section. During a heat-storage mode, the heat pipes transferred heat from the hot steam at one side to the molten salts and it transferred heat from the molten salt to the cold steam at the other side during the heat-dissipating mode. A tube-bank type heat exchanger theory was applied to this design task to meet the required inlet and outlet temperatures of the steams depending on the operation modes. Several design variables were considered including the lengths of evaporator and condenser of a heat pipe, traverse and longitudinal pitches of the pipe, and the number of rows of the heat pipes for two different molten salt baths. An optimum design results were presented with discussion.

• Archives of Pharmacal Research
• /
• v.28 no.3
• /
• pp.319-324
• /
• 2005

The present study was designed to study the difference effects between nicardipine and its two enantiomers on thoracic artery of rabbit. A high-performance liquid chromatographic method was used to prepare the two enantiomers of nicardipine. The thoracic artery of rabbit was removed. The vessels were cut into 3 mm in width and 15 mm in length spiral strips and immersed into tissue baths. The concentration-response curves of nicardipine and its enantiomers were obtained by cumulative administration of the vasoconstrictors. Nicardipine and the enantiomers could shift the dose-response curves of NE, KCI or CaCl$_2$ to right in a nonparallel manner and decrease the maximum effective in a concentration-depended manner, respectively. The pD$_2$' value of R-(-)-nicardipine showed significantly effective than that of nicardipine and S-(+)-nicardipine (P<0.01). There was not obviouse difference between the pD$_2$' value of nicardipine and S-(+)-nicardipine (P>0.05). The results demonstrate that the stereoselective interaction between R-(-)-nicardipine and L-calcium channel receptor is more stronger than that of S-(+)-nicardipine.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.20 no.1
• /
• pp.114-124
• /
• 2007

Purpose : The pharmacological effects of medicinal remedies traditionally used in Asian countries for improving the blood circulation were examined on isolated rat thoracic aorta strips in organ baths. Methods and results : Each experimental medicine was consecutively extracted under reflux with water. Of three medicinal remedies . Hirudo(HI) having the strongest acute relaxant activity in endothelium-intact arteries, Tabanus(TA), Empoly ohaga(EO) were showing dose-dependent relaxant activity. Long-term relaxant effects were showed in Hirudo(HI) and Empoly ohaga(EO). In endothelium-injury test using carbachol, Hirudo(HI), Tabanus(TA) and Empoly of ohaga(EO) were not damaged to endothelium. Conclusion: As a result of this study, the possibility that a part of medicinal remedy may contribute to the beneficial effects in blood circulation was proposed, but inter-individual variation has been observed. Also, further studies on the vasorelaxant effects of these remedies are still required.

• Environmental Analysis Health and Toxicology
• /
• v.18 no.3
• /
• pp.219-224
• /
• 2003

1,4-Dioxane is used as a solvent for lacquers, paints, varnish removers, dye baths and printing compositions. And it is also used for detergent preparations, cosmetics, deodorants and fumigants. A method is described for the determination of 1,4-dioxane in water samples by GC/MS. The extraction recoveries were studied for some solvents and solvent volume ratio were investigated using r-butyl methyl ether (MTBE). Optimum condition was obtained by the liquid-liquid extraction using the 10 mL of MTBE for 10 mL of water. Method detection limit of 1,4-dioxane in the 20 mL of water samples was 0.05 ng/mL. It could be determined in the range of 0.24∼240 ng/mL in treated water, and in the range of 0.69∼81.9 ng/mL in raw water, respectively. Risk assessments with 1,4-dioxane exposure by drinking water ingestion were carried out. Based on the results of analysis, chronic daily intake of 1,4-dioxane was 2.22${\times}$10$\^$-4/ mg/kg/day and excess cancer risk was calcu-lated to be 2.44${\times}$10$\^$-6/.

• Journal of Surface Science and Engineering
• /
• v.53 no.4
• /
• pp.190-199
• /
• 2020

Copper pyrophosphate baths were employed in order to study the dependencies of current efficiency, residual stress, surface morphology and microstructure of electrodeposited Cu thin layers on applied current density. The current efficiency was obtained to be more than about 90 %, independent of the applied current density. Residual stress of Cu electrodeposits was measured to be in the range of -30 MPa and 25 MPa with the increase of applied current density from 0.5 to 15 mA/㎠. Relatively smooth surface morphologies of the electodeposited Cu layers were obtained at an intermediate current range between 3 and 4 mA/㎠. The Cu electrodeposits showed FCC(111), FCC(200), and FCC(220) peaks and any preferred orientation was not observed in this study. The average crystalline size of Cu thin layers was measured to be in the range of 44~69 nm.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1424-1429
• /
• 2004

Distillation is one of many processes that can be used for the purification of water. It requires an energy input such as heat and solar radiation is a possible source of energy. In this process, water is evaporated, thus separating water vapor from the solute. The vapor is then condensed to pure water. The temperature of the water, the cavity of the enclosure and the surface of the glass was measured everyday. Fifteen points were chosen for the temperature measure using a thermocouple. The inner wall and the bottom of each still was painted black for good absorption of heat. The enforced glass was used for the cover for the entering of solar energy. The size of all of the water baths was the same, but the glass of the rectangular form had a tilted angle. In the case of fine or general weather, the volume of condensed water produced by $45^{\circ}$ and $60^{\circ}$ is very irregular compared to that of $15^{\circ}$ and $30^{\circ}$, In case of a rainy day, the occurrence of the volume of condensed water was similar to that of $15^{\circ}$ and $30^{\circ}$, but the volume of condensed water produced by $30^{\circ}$ was the highest.

• Corrosion Science and Technology
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2014

A low carbon steel, Fe-2.25%Cr steel (ASTM T22), and Fe-2.25%Cr-1.6%W steel (ASTM T23) were aluminized by hot dipping into molten Al baths. After hot-dipping, a thin Al-rich topcoat and a thick alloy layer formed on the surface. The topcoat consisted primarily of a thin Al layer that contained a small amount of Fe, whereas the alloy layer consisted of Al-Fe intermetallics such as $Al_5Fe_2$ and AlFe. Cr, Mo, and W in T22 and T23 steels reduced the thickness of the topcoat and the alloy layer, and flattened the reaction front of the aluminized layer, when compared to the low carbon steel.