• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 추계학술발표회 초록집
• /
• pp.39-39
• /
• 1999

• 한국표면공학회지
• /
• 제32권6호
• /
• pp.686-694
• /
• 1999

Insoluble anodes of the Ta/Ir mixed metal oxide for electrodeposition of Ni-W alloy in ammoniacal citrate bath were prepared by thermal decomposition method. Ti plate was etched in boiling oxalic acid solution and coated with ethanol solution of $TaCl_{5}$ and $IrCl_4$ mixed in a fixed ratio, followed by drying and treating at various temperatures. The coating layer of these insoluble anode was characterized by SEM, EDX, XRD and DSC. The decomposition rate of citric acid in plating bath was determined by measuring the $CO_2$ gas evolved at the anodes with Gas Chromatography. Evolution of $CO_2$ gas from Ta/Ir oxide anodes decreased about 5% compared with that of Pt. The $CO_2$ gas evolution was increased with the amount of Ir-oxide in the coatings. The coatings which have more than 40% ratio of Ta content and heat-treated at the temperature higher than $400^{\circ}C$ showed better efficiency

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.146-148
• /
• 2012

In our study, we have focused on optimizing good quality of ZnS buffer layer by chemical bath deposition (CBD) from a bath containing $ZnSO_4$, Thiourea and Ammonia in aqueous solution onto CIGS solar cells. The influence of deposition parameter such as pH, deposition temperature, stirring speed played a very important role on transmission, homogeneity, crystalline of ZnS buffer layer. The transmission spectrum showed a good transmission characteristic above 80% invisible spectral region. CIGS thin flim solar cell with ZnS buffer layer has been realized with the efficiency of 14.2%.

• 한국염색가공학회지
• /
• 제23권1호
• /
• pp.51-59
• /
• 2011

Calcium alginate fiber were prepared by wet spinning of various conditions, including different concentrations of sodium alginate solution and $CaCl_2$ concentrations for coagulating the fiber through an absorption of calcium ion. The absorption of calcium ion during the coagulating step lead to solidify the fibers by the replacement of sodium ion with calcium ion to produce some crosslinking. The concentration of calcium ion in the calcium alginate fiber seems to be well related to the mechanical and physical property of the fiber, such as fiber strength moisture regain, and degree of swelling. The tensile strength of calcium alginate fiber was increased along with the increasing amount of sodium alginate solution. According to EDS analysis, 7 wt% $CaCl_2$ coagulation bath resulted in more calcium ion in the fiber compared to 3 wt% $CaCl_2$ coagulation bath. The decomposition temperature of calcium alginate fiber was $199^{\circ}C$, which $14^{\circ}C$ higher than that of sodium alginate.

• 한국축산식품학회지
• /
• 제29권6호
• /
• pp.673-679
• /
• 2009

To develop ready-to-eat (RTE) style Korean traditional Galbi-jjim, the optimal conditions for sous-vide cooking and cookchill preparation and the sensory properties of the cooked products were investigated. During heating, the meat core temperatures reached $85^{\circ}C$ within 30 min and 45 min when a water bath and combination oven were used, respectively. Chilling to $3^{\circ}C$ within 45 min was conducted to meet the standards for microbiological safety set by the UK Department of Health and Social Security (DHSS) Guideline. Galbi-jjim that was vacuum-cooked in a water bath was much more tender than that of Galbi-jjim prepared using the cook-chill method, but had no difference in any reheating methods. The average sensory scores of juiciness and the overall acceptance of Galbi-jjim were significantly higher when water bath cooking was used, and there were no differences in reheating methods. In conclusion, the serial methods of sous-vide processing and rapid chilling can be applied to produce RTE traditional Galbi-jjim, and this can be conducted while meeting the standards specified in safety guidelines.

• 멤브레인
• /
• 제15권2호
• /
• pp.85-104
• /
• 2005

Recently, membrane can be prepared by two methods, phase inversion and electrospinning techniques. Phase inversion technique is a conventional but commercially preparation membrane. The most versatile of preparation in this technique is immersion of the cast film into nonsolvent bath, causing dense top layer with a finger-like pattern in the sub layer membrane. The membrane pore size getting from phase inversion is in the range of micro or submicrometer. As a result, it can be used as microfiltration and ultrafiltration applications. A new technique, electrospinning, is introduced for membrane preparation. Nonwoven nanofibrous mat or nanofibrous membrane is obtained. In this technique, electrostatic charge is introduced to the solution jet, causing a thin fiber with high surface area; hence it can be used in the applications where high surface area-to-volume or length-to-diameter ratios are required. Moreover, the pore size can be controlled by controlling the time of electrospinning. Hence, it can be used as a filter for filtering microparticles as well as nanoparticles.

• 한국식품영양과학회지
• /
• 제18권1호
• /
• pp.34-39
• /
• 1989

쌍화차의 제조공정중 추출은 용매를 50% etanol 로 하고 그 첨가량은 원료량의 10배로 하였을 때 가장 수율이 높았고, 추출온도 및 시간은 $90^{\circ}C$ water bath에서 8시간 추출하는 방법이 가장 효과적으로 생산비를 절감할 수 있었다. 또한 특수성분의 HPLC분석 결과는 50% ethanol로 추출한 제품이 물로 추출한 것보다 높은 양을 나타내었고 특히 Decursinol성분의 경우에 물추출로는 38.59 PPM, 50% ethanol추출로는 298.02PPM으로 가장 현저한 차이를 나타내었다.

• 한국표면공학회지
• /
• 제42권4호
• /
• pp.152-156
• /
• 2009

Electroless plating is influenced by kinds of parameters including concentrations of electrolyte, plating time, temperature and so on. In this study, the Pt thin films were prepared on GaAs substrate by a 2-step electroless plating depending method. The small Pt catalytic particles by using Pt I bath exhibited islands-morphology dispersed throughout the substrate surface at $65^{\circ}C$, as function as a sensitized thin film, and then a thicker Pt film grew upon the sensitized layer by the second Pt II bath. As the growth of Pt film is strongly influenced by the plating time and temperature, the plating time of Pt II bath varied from 5 min to 40 min at $60{\sim}80^{\circ}C$ after Pt I bath at $60{\sim}80^{\circ}C$ for 5 min. It is found that the film grows with the increasing plating time and temperature. The resistivity value of Pt deposited layer was characterized to study the growth mechanism of 2-step plating.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.161-165
• /
• 2004

Since Loeb and Souriajan first introduced phase inversion method [1], much investigation has been made for understanding the mechanism of formation of asymmetric membranes. Phase inversion is the most extensively used technique for the preparation of asymmetric membranes, which is that cast solution film on a substrate is immersed and is precipitated in water bath.(omitted)

• 한국수소및신에너지학회논문집
• /
• 제4권2호
• /
• pp.23-28
• /
• 1993

The $(LM)Ni_{4.5}Co_{0.1}Mn_{0.2}Al_{0.2}$ hydrogen storage alloy powders were conducted 25wt% electroless copper plating in an acidic bath. For the preparation of a hydride electrodes, the copper coated alloy powder was mixed with Si-sealant(organosilicon) and compacted with $6t/cm^2$ at room temperature. The electrode characteristics were examined through electrochemical measurements in a half cell. As a sealant contents increased, the initial discharge capacity of si-sealant bounded electrode was lower and the activation rate in high current density was slower. For extended cycles, however, the electrodes with the Si-sealant were superior in a high rate discharge and useful range of temperature over the sealant-free electrode. In addition, the cycle life increased with increasing the amount of Si-sealant added. It can be suggested from the results that the Si-sealant as a binder could be applied to the preparation of the metal hydride electrode.