• KSBB Journal
• /
• v.29 no.4
• /
• pp.303-306
• /
• 2014

Antifreeze proteins (AFP) inhibit ice growth to permit the survival of polar organisms in the cold environments. The recombinant AFP from an Antarctic bacterium, Flavobacterium frigoris PS1, FfIBP (Flavobacterium frigoris ice-binding protein), was produced using Pichia pastoris expression system. The optimum fermentation temperature ($30^{\circ}C$) and pH (5) for FfIBP production were determined using a fed-batch culture system. The maximal cell density and purified FfIBP were 112 g/L and 70 mg/L, respectively. The thermal hysteresis (TH) activity (0.85) of FfIBP obtained using a glycerol-methanol fed-batch culture system was 2-fold higher than that of the LeIBP (Leucosporidium ice-binding protein). This work allows for large-scale production of FfIBP, which could be extended to further application studies using recombinant AFPs.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.92-95
• /
• 2000

A mixed bacterial culture capable of mineralizing methyl tort-butyl ether (MTBE), other fuel oxygenates ethers, tertiary carbon alcohols, benzene and toluene was used to inoculate batch reactor and sequence batch reactor (SBR) to treat gasoline contaminated ground water containing about 60 mg/L MTBE, 5 mg/L benzene, 5 mg/L toluene, and low concentrations of several other aromatic and aliphatic hydrocarbons. Respirometery studies showed that MTBE degrading mixed culture could treat MTBE contaminated ground water with addition of nitrogen and phosphate. SBR was operated to demonstrate the feasibility of using suspended growth activated system for the treatment of ground water and to confirm that the respirometry derived kinetics and stoichiometric coefficients were useful for predicting reactor performance. Theoretical performance of the reactor was predicted using mathematical models calibrated with biokinetic parameters derived from respirometry studies.

• Journal of applied mathematics & informatics
• /
• v.24 no.1_2
• /
• pp.387-397
• /
• 2007

According to the controllability of pulse times and the amount of jumps in the states at these times in the process of fed-batch culture producing 1,3-propanediol, this paper proposes a terminal optimal control model, whose constraint condition is the nonlinear impulsive delay system. The existence of optimal control is discussed and an optimization algorithm which is applied to each subinternal over one cycle for this optimal control problem is constructed. Finally, the numerical simulations show that the terminal intensity of producing 1,3-propanediol has been increased obviously.

• KSBB Journal
• /
• v.25 no.5
• /
• pp.471-477
• /
• 2010

In order to improve bio-ethanol productivity by various cultivation methods in this paper, the culture modes using food wastes, such as batch culture, high-cell-density fermentation, SSF (simultaneous saccharification and fermentation) by fill & draw, continuous culture by fill & draw were performed and their productivities were compared. SSFs by fill & draw were performed by continuous decompression using 1 L evaporator system, and by 10 L bioreactor without decompression. In addition, the continuous cultures by fill & draw mode using SFW (saccharafied food wastes) medium were performed by changes of 40% culture broth with intervals of 12 h (0.03 $h^{-1}$), 6 h (0.07 $h^{-1}$), 3 h (0.13 $h^{-1}$). Consequently, productivities of bio-ethanol were 2.52 g/L-h and 1.30 g/L-h in batch culture and high- cell-density fermentation, respectively. The productivities of SSF by fill & draw showed 2.24 g/L-h and 2.03 g/L-h in continuous decompression with 1 L evaporator and 10 L bioreactor without decompression, respectively. Also, the productivities in continuous culture by fill & draw modes showed 2.02 g/L-h, 4.07 g/L-h and 6.25 g/L-h by medium change with intervals of 12 h, 6 h, and 3 h, respectively. In conclusion, the highest ethanol productivity was obtained in the continuous culture mode by fill & draw with dilution rate of 0.13 $h^{-1}$.

• Microbiology and Biotechnology Letters
• /
• v.27 no.4
• /
• pp.327-332
• /
• 1999

A highly productive fed-batch fermentation process was developed for the production of L-ornithine by using a new stabilized strain, Breviabcterium ketoglutamicum BK52. Fed-batch cultures with a continuous feeding of the complex medium were conducted on various operating conditions. The optimal concentration of phosphate in the complex medium was 2.1g/L. The optimal feeding rate of L-arginine was 0.028g/L/hr. The optimal feeding point of the complex medium was determined to be at 40 OD of the cell mass. The final L-ornithine concentrations within 64hrs of cultivation in 5 and 50 liter fermenters were 73g/L and 71g/L, respectively. The maximum overall L-ornithine productivity was 1.14g/L/hr which was about 2 times higher than that of the conventional fed-batch culture with intermittent feeding. The overall productivity of the fermentation system is remarkably improved by employing the optimized conditions, and it offers a significant potential for industrial application.

• Microbiology and Biotechnology Letters
• /
• v.20 no.6
• /
• pp.668-676
• /
• 1992

For the purpose of optimizing poly-l3-hydroxybutyrate (PHB) production from Alcaligenes eutrophus, two-stage fed-batch culture was adopted. In this system, specifk growth rate was maximized during the first stage whereas specific production rate was maximized during the second stage. The optimal concentrations of glucose and ammonium chloride were 16.6 and 0.54 g/I in the growth stage and 20.0 and 0.07 g/l in the production stage, respectively. Proportional feedback control considering time lag was suggested for PHB production process and a simulator was developed for real-time control purpose.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.3
• /
• pp.168-173
• /
• 1993

The expression kinetics of human lipocortin I (LCI), a potential anti-inflammatory agent, was studied in the shake-flask and fermenter cultures of Saccharomyces cerevisiae carrying a galactose-inducible expression system. The cell growth, expression level of LCI, and the plasmid stability were investigted under various galactose induction conditions. The expression of LCI was repressed by the presence of a very small amount of dextrose in the culture medium, but it was induced by galactose after dextrose became completely depleted. The optimal ratio of dextrose to galactose for lipocortin I production was found to be 1.0 (10 g/l dextrose and 10 g/l galactose). With optimal D/G ratio of 1.0 and the addition of galactose prior to dextrose depletion, LCI of about 100~130 mg/l was produced. LCI at a concentration of 174 mg/l was porduced in the fed-batch culture, which was nearly a twice as much of that produced in the batch culture. The plasmid stability was very high in all culture cases, and thus was considered to be not an important parameter in the expression of LCI.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.32-43
• /
• 2000

Batch culture system and continuous culture systems were used to investigate the removal of disperse dye using white rot fungi. White rot fungi used in the study were Coriolus hirsutus IFO 4917, Lenzites betulina IFO 6266, Coriolus versicolor IFO 30340 and Phanerochaete chrysosporium IFO 31249. The results of the batch culture experiment showed that white rot fungi used in this study had excellent dye removal abilities. Phnerochete chrysosporium IFO 31249 was especially effective on the removal of disperse dyes. And continuous treatment of disperse red 60 was studied under two type of reactor using Phanerochaete chrysosporium IFO 31249. The removal efficiency of disperse red 60 for immobilized Phanerochaete chrysosporium IFO 31249 in continuous reactor with vertical matrix was increased 1.3 fold in $1.4\;hr^{-1}$ dilution rate when compared with continuous reactor without vertical matrix.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.5
• /
• pp.641-646
• /
• 2003

An accurate and efficient method for measuring the mass of hairy roots using conductometry is established. A conductivity equation expressed in terms of the concentration of the ion species in the medium is suggested. By using this equation, the effect of the individual ions on the total conductivity can be quantitatively analyzed. An equation for the in situ estimation of the cell growth coefficient for determining the mass of hairy roots is established based on measurements of the nitrogen concentration and conductivity during cultivation. The proposed equation does not require preliminary experiments to determine the cell growth coefficient. Instead, the physiological characteristics of the plant species are reflected by introducing the cellular nitrogen content. Since the cell growth coefficient is determined by measuring the major ionic nutrient concentrations, it is more effective to express the dynamics of an actual culture system. This improved method for determining the mass of hairy roots was successfully utilized in a fed-batch culture system.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.9
• /
• pp.972-981
• /
• 2009

In this paper, a fed-batch cultivation process in recombinant Escherichia coli BL21(DE3) bacteria, for the production of human soluble catechol-O-methyltransferase (hSCOMT), is presented. For the first time, a straightforward model is applied in a recombinant hSCOMT expression system and distinguishes an initial cell growth phase from a protein production phase upon induction. Specifically, the kinetic model predicts biomass, substrate, and product concentrations in the culture over time and was identified from a series of fed-batch experiments designed by testing several feed profiles. The main advantage of this model is that its parameters can be identified more reliably from distinct fed-batch strategies, such as glycerol pulses and exponential followed by constant substrate additions. Interestingly, with the limited amount of data available, the proposed model accomplishes satisfactorily the experimental results obtained for the three state variables, and no exhaustive process knowledge is required. The comparison of the measurement data obtained in a validation experiment with the model predictions showed the great extrapolation capability of the model presented, which could provide new complementary information for the COMT production system.