• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.2 s.12
• /
• pp.45-58
• /
• 1998

Digital photogrammetry is growing today using inexpensive personal confuter and digital image Processing technique instead of expensive analytical plotter in data acquisition from aerial photograph. Ortho photo in replacement of paper map is indispensable in the application of Geo-Spatial Information System and research activities about it are active in the domestic domain. Also the availability of ortho photo is greatly various in existing related fields using topographic map and expected to be used for new technology in near future. For this purpose, design of each module for ortho photo has been carried out with digital map and image. It was shown that the batch program for ortho photo generation developed in this study, could be used effectively as an effective data acquisition method for GSIS.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.515-520
• /
• 2004

We report on the development of a Piezoelectric valvc that is designed to have a high reliability for fluid control systems, such as mass flow control, transportation and chemical analysis. The valve was fabricated using a MCA(multilayer ceramic actuator), which has a low consumption power, high resolution and accurate control. The fabricated valve is composed of MCA, a valve actuator die and an seat die. The design of the actuator dic was done by FEM(finite element method) modeling, respectively. And, the valve seat die with 6 trenches was made. and the actuator die, which possible to optimize control to MCA, was fabricated. After Si-wafer direct bonding between the seat die and the actuator die, MCA was also anodic bonded to the scat/actuator die structure. PDMS(poly dimethylsiloxane) sealing pad was fabricated to minimize a leak-rate. It was also bonded to scat die and stainless steel package. The flow rate was 9.13 sccm at a supplied voltage of 100 V with a 50 % duty ratio and non-linearity was 2.24 % FS. From these results, the fabricated MCA valve is suitable for a variety of flow control equipments, a medical bio-system, semiconductor fabrication process, automobile and air transportation industry with low cost, batch recess and mass production.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.427-437
• /
• 2013

Generation rate of construction wastes in Korea has occupied preponderantly in recent years. To understand chemical properties of recycled concrete aggregate (RCA), RCA samples were tested for their leaching characteristics. Leaching tests were conducted according to Korean Standard Leaching Test (KLT) and Toxicity Characteristics Leaching Procedure (TCLP) respectively. The RCA samples were characterized using X-ray fluorescence (XRF). Alkalinity of the leachate was determined using a pH meter titration method. The XRF analysis result shows that the calcium oxide (CaO) content in the RCA sample is 25.3~50.4 %. When the RCA sample was mixed with water in a batch reactor, pH in the solution was rapidly increased, and 70% of the total pH change was found in 1 hour. The TCLP showed slightly higher efficiency for leaching heavy metals than the KLT. The leaching efficiency was also higher as the particle size of RCA sample was smaller. The leaching test results suggest that RCA can be generally classified as nonhazardous waste.

• Toxicological Research
• /
• v.8 no.2
• /
• pp.285-302
• /
• 1992

Human and rat hepatocytes were isolated by nonperfusion method and cultured for longer than 5 days. Human liver biopsy sample and rat liver were used as hepatocyte source. Several physical and chemical factors which were influencing on hepatocyte isolation procedure were examined and a batch isolation procedure was established for small size sample of rat liver. Isolated hepatocytes showed normal morphlologica characteristics in microscopy and electron microscopical examinations and a morphologica response to phalloidin. Isolated cells were cultured as a monolayer and proven to have intact morphological characteristics for longer than 15 days. Because human liver sample is harder and tighter compared with rat liver, a standard procedure for rat hepatocytes was slightly modified to reduce mechanical damage. Similarly with rat hepatocytes, isolated human hepatocytes showed a normal morphological characteristics and could be cultured for longer than 15days. Human and rat hepatocytes were examined on their functional integrities including cytochrome-P450 related enzyme activity and it's inducibility, hormonal inducibility of AIB uptake and TAT activity, albumin synthesis, DNA synthesis, cellular protein maintenance. In all parameters used in the present study, human and rat hepatocytes showed normal functional characteristics.

• Journal of Korean Society on Water Environment
• /
• v.33 no.1
• /
• pp.90-96
• /
• 2017

Many sewage treatment plants have applied the advanced technology of chemical coagulant system to remove phosporus in Korea. However there are some problems for the injection of optimum coagulant dosage. In order to solve these problems, the research related to the more cost-effective automatic total phosphorus coagulation control system using an EC(Electrical Conductivity) have been in progress. This study was conducted by the same process and operation method as the Lab-scale for public small town sewage treatment plant. First, it confirmed the correlation among the EC, PO4-P and coagulant dosage in the Lab-scale MSBR(Membrane Sequencing Batch Reactor) process. Next, it analyzed that correlation coefficient of EC and the coagulant dosage was 0.92 in the Full-scale MSBR process. As a result, not only T-P removal efficiency was doubled but also it satisfied the effluent water quality standard in a stable manner. In addition, by applying the automatic control system using the EC, compared to the fixed coagulant injection system the coagulant dosage could be reduced by 28%.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.2
• /
• pp.83-90
• /
• 2016

This study was performed to evaluate the effective analysis of flexural performance for polypropylene fiber (PF) reinforced EVA concrete that can be used in marine bridge, tunnel and agricultural structures under flexural load. The control design was applied in ready mixed concrete using 10 % fly ash of total binder weight used in batch plant. On the basis of the control mix design, there was designed mix types that contained PF ranged from 0 % to 0.5 % by volume ratio into two mix types of using 0 % and 5.0 % EVA contents of total binder weight. Before evaluating the flexural performance, we tested compressive strength and flexural strength to evaluate whether polypropylene fiber reinforced concrete could be used or not in site. The method of flexural performance evaluation was applied by ASTM C 1609. These results showed the maximum compressive strength and flexural strength was measured at each E5P1 and E5P2. Concrete reinforced with PF exhibited deflection-softening behavior. In the concrete reinforced with 0.4 % PF contents and containing 5.0 % EVA, the flexural performance was the best.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.42-48
• /
• 1993

In the present work, decoloring of acid dye solution by the diethylaminoethylated cellulosic adsorbents($CA_{DASE}$) was studied with the aim of developing polymeric adsorbents for the treatment of colored wastewaters. To prepare the cellulosic adsorbents, the $CA_{DASE}$ cellulose and polyvinyl alcohol mixture(80 wt% cellulose content) were crosslinked by tryacryloyl hexahydro-s-tryazine(TAHHT), ammonium phosphate and then treated with solutions containing sodium hydroxide and 2-diethylaminoethyl chloride. Batch and flow method were employed to determine decoloring capacity of C $A_{DEAE}$ for C.I.acid yellow 49. $CA_{DASE}$ exhibited much better desorption capacity than activated carbon. Furthermore, the exhausted $$CA{DASE} could be readily regenerated by washing with dilute sodium hydroxide.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.155-170
• /
• 2004

Among the semiconductor If-chips, unlike memory chips, a majority of Application Specific IC(ASIC) products are produced by customer orders, and meeting the customer specified due date is a critical issue for the case. However, to the one who understands the nature of semiconductor manufacturing, it does not take much effort to realize the difficulty of meeting the given specific production due dates. Due to its multi-layered feature of products, to be completed, a semiconductor product(called device) enters into the fabrication manufacturing process(FAB) repeatedly as many times as the number of the product specified layers, and fabrication processes of individual layers are composed with similar but not identical unit processes. The unit process called photo-lithography is the only process where every layer must pass through. This re-entrant feature of FAB makes predicting and planning of due date of an ordered batch of devices difficult. Parallel machines problem in the photo process, which is bottleneck process, is solved with restricted roll out algorithm. Roll out algorithm is a method of solving the problem by embedding it within a dynamic programming framework. Restricted roll out algorithm Is roll out algorithm that restricted alternative states to decrease the solving time and improve the result. Results of simulation test in condition as same as real FAB facilities show the effectiveness of the developed algorithm.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.268-272
• /
• 1983

Polyurethane foam impregnated with ${\beta}$-diphenylglyoxime has been applied to the extraction of palladium(II) from platinum(IV) and nickel(II) in aqueous solution. Palladium(II) is quantitatively extracted from $0.01{sim}0.05M$ HCl. On the other hand, platinum(Ⅳ) was slightly extracted and nickel(II) was not found to be extraction in the same experimental condition. Based on the results obtained, the selective separation, removal and recovery of Pd(II) from Pt(IV) or Ni(II) was possible by batch or elution method.

• Nuclear Engineering and Technology
• /
• v.27 no.1
• /
• pp.25-32
• /
• 1995

Batch sorption experiments were conducted to investigate the sorption characteristics of $^{137}$ Cs, known for the primary target of safety assessment in low-level radwaste disposal, onto domestic rocks such as Granite and Tuff. A response surface analysis method was applied to quantify the effect of 3 independent variables (［Cs］, ［Vol/Wt］, ［pH］) on the sorption. Ac a result, initial Cs concentration appeared to be the most important variable within the range of the study. A significant effect of ［Vol/Wt］ on Kd was observed. The sorption of Cs was pH-insignificant. The sorption extent of nuclides onto tuff was more significant than that onto granite. The pH-insignificant sorption behavior of Cs was discussed in terms of the surface electrical properties and the solution chemistry. The sorption tendency of nuclides onto geomedia studied was interpreted by adopting the water structure modification theory.