• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.96-102
• /
• 2014

Adsorption of metanil yellow onto granular activated carbon were studied in a batch system. Various operation parameters such as adsorbent dosage, pH, initial concentration, contact time and temperature were optimized. Experimental equilibrium adsorption data were analyzed by Langmuir and Freundlich adsorption isotherm. The equilibrium process was described well by Freundlich isotherm model. From determined separation factor (1/n), adsorption of metanil yellow by granular activated carbon could be employed as effective treatment method. By analysis of kinetic experimental data, the adsorption process were found to confirm to the pseudo second order model with good correlation and the adsorption rate constant ($k^2$) decreased with increasing initial concentration. Thermodynamic parameters like activation energy, change of free energy, enthalpy, and entropy were also calculated to predict the nature adsorption in the temperature range of 298~318 K. The activation energy was determined as 23.90 kJ/mol. It was found that the adsortpion of metanil yellow on the granular activated carbon was physical process. The negative Gibbs free energy change (${\Delta}G=-2.16{\sim}-6.55kJ/mol$) and the positive enthalpy change (${\Delta}H=+23.29kJ/mol$) indicated the spontaneous and endothermic nature of the adsorption process, respectively.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.351-356
• /
• 2008

Titania nanoparticles were prepared by controlled hydrolysis of titanium tetraisopropoxide (TTIP) in water-in-oil (W/O) and microemulsion stabilized with a nonionic surfactant, N P-10 (Polyoxyethylene Nonylphenol Ether: $C_9H_{19}C_6H_4(OCH_2CH_2)_{10}OH$)). The nanosized particles prepared in W/O microemulsion were characterized by FT-IR, TEM, XRD, TGA, and DTA. In addition, the photocatalytic degradation of p-nitrophenol has been studied by using a batch reactor in the presence of UV light in order to compare the photocatalytic activity of prepared nanosized titania. The nanaosized titania particles calcined at $300{\sim}600^{\circ}C$ showed an anatase structure, but it transformed to a rutile phase above $700^{\circ}C$ of calacination temperature. With an increase of $W_o$ ratio, the crystallite size increased but photocalytic activity decreased. The titania synthesized at $W_o=5$, R = 2, and calcined at $400{\sim}500^{\circ}C$ showed the highest activity on the photocatalytic degradation of p-nitrophenol.

• Korean Journal of Ecology and Environment
• /
• v.36 no.2 s.103
• /
• pp.139-149
• /
• 2003

This study was conducted to determine limiting nutrients and the physiological characteristics of phytoplankton in response of nutrients in Lake Paldang from March 2002 to October 2002. A field research was conducted along with laboratory batch culture experiment to find the limiting nutrients and the growth kinetics. According the results of Chl. a TP relationship, TN/TP ratio, and nutrient addition bioassay, phosphorus appeared to be a major limiting nutrient in Lake Paldang and thus the lake productivity was greatly influenced by it. P limitation for the phytoplankton of Lake Paldang varied with season, and the possibility of limitation by nitrogen and silica also occurred. The degree of P limitation was greatest during spring when the concentration of dissolved phosphorus is relatively much lower than summer and autumn. The maximum growth rate (${\mu}_{max}$) and half saturation concentration ($K_u$) of Lake Paldang phytoplankton ranged from 0.8${\sim}$1.1$day^1$ and from 0.1${\sim}$O.8${\mu}M$, respectively. $K_u$ was highest during May ($0.8{\mu}M$) and the lowest during September ($0.1{\mu}M$). Such result may be induced by the phytoplankton cell quota that showed the lowest concentration ($0.13{\mu}gP/{\mu}gChl.$ a) during May. The growth kinetics showed that phytoplankton growth in Lake Paldang was faster during summer and autumn than spring, suggesting that the Potential of algal bloom is high after the summer monsoon season.

• Korean Journal of Food Science and Technology
• /
• v.46 no.3
• /
• pp.315-322
• /
• 2014

Immobilized lipases were prepared by physical adsorption using lipase AK, AY, AH, PS and R on Amberlite$^{(R)}$XAD$^{(R)}$7 HP resin. With the immobilized lipases (10%), structured lipid was synthesized by enzymatic interesterification of canola oil, palmitic ethyl ester, and stearic ethyl ester in order to study the reaction characteristics. Among the lipase, the highest protein content was obtained from lipase AH (11.41%) before immobilization, while the highest levels of bound protein was observed from immobilized lipase AK (63.91%). Immobilized lipase AK had the highest interesterification activity (38.3% of total saturated fatty acid). Lipase AK was also used for a continuous reaction in which the slow flow of reactant resulted in increased reaction rate. Reusability of immobilized AK, AH and PS increased at the second reaction (120-196.5%). However, the activity of immobilized AK, which had the highest bound protein content (63.91%) decreased after the third reaction, while the activity of immobilized AH and PS was maintained until the sixth reaction.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.525-529
• /
• 2016

Twenty-nine pepper products commercially available in the market were collected and investigate for contamination levels. Pepper products purchased from traditional markets had a degree of contamination of $10^6-10^7CFU/g$ aerobic bacteria, $10^4-10^5CFU/g$ Bacillus sp., and less than $10^2CFU/g$ yeast and molds. Organic pepper showed a degree of contamination of $10^4$ aerobic bacteria, $10^2-10^3$ Bacillus sp., and less than $10^1$ yeast and molds. Intense pulsed light (IPL) treatment of 10 min (1,000 V, 5 pps and 4 cm sample-to-lamp distance) showed a bacterial death rate of 1.45-1.55 log for whole peppers, and of 0.8-0.85 log for black and white pepper powder. The sterilization rate using IPL was higher than that using other non-thermal sterilization methods, such as ozone treatment or low-pressure discharge plasma sterilization, indicating that the IPL sterilization method may find potential application in the industry. However, further studies may need to be conducted to enhance the effect of sterilization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.584-591
• /
• 2017

Metal removal from water has not been explained clearly by either adsorption onto the surface of absorbents or precipitation as metal hydroxides because those occur simultaneously to a certain extent. For a better understanding of the metal removal mechanisms, batch experiments were performed using soil calcined at $850^{\circ}C$ under various pH conditions for Cu, Pb, Zn, Cd, and Cr. The results showed that the metal removal efficiency with the exception of Cr decreased abruptly, even within 5 min, showing more than 90% removal. The pH of each reactant increased gradually from around 7 to 9 with time. The increases in metal removal at higher pH appear to be associated with metal hydroxides precipitation. Comparative experiments, which were carried out changing the pH by reacting with commercial activated carbon (CAC), natural yellow soil (NYS), and calcined yellow soil (CYS), showed that the pH of the CYS only increased with time. Calcination processes might lead to a change in the physical properties of the soil matrix resulting in a high pH when reacted with water. Apart from adsorption onto the surface of the absorbents, these results show that the adsorption and/or precipitation of hydroxides onto the surface of adsorbents also play important roles in regulating the dissolved metals under alkaline conditions.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.50-56
• /
• 2018

For the purpose of optimizing the counter current extraction process for separation of [Pr, Nd, Sm] group and [La] in mixed solution using Cyanex 572 as an extractant, the theory of Xu Guangxian was derived for calculating the optimized extraction factors. From the basic batch test result, the separation factor was 16.80 at extraction process and 21.48 at scrubbing process, and the loading capacity of 1.0 M Cyanex 572 was 0.12 M of rare earth element. The process parameters such as the stage number at extraction and scrubbing process, the flow rate ratio of feed and solvent solution can be calculated using an equation of optimum extraction ratio proposed by Xu Guangxian. From the result of calculation, 7 extraction stages and 4 scrubbing stages were required for rare earth separation, and the flow rate ratio of feed solution, solvent solution, scrubbing solution was 25 : 5.67 : 12.27.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.3-14
• /
• 2020

Titanium sponge is industrially produced by the Kroll process. In order to understand the importance of the emerging smelting and recycling process, it is necessary to review the conventional production process of titanium. Therefore this paper provides a general overview of the conventional titanium manufacturing system mainly by the Kroll process. The Kroll process can be divided into four sub-processes as follows: (1) Chlorination of raw TiO₂ with coke, by the fluidized bed chlorination or molten salt chlorination (2) Magnesium reduction of TiCl₄ and vacuum distillation of MgCl₂ and Mg by reverse U-type or I-type with reduction-distillation integrated retorts (3) Electrolysis process of MgCl₂ by monopolar cells or multipolar cells to electrolyze into chlorine gas and Mg. (4) Crushing and melting process in which sponge titanium is crushed and then melted in a vacuum arc furnace or an electron beam furnace Although the apparatus and procedures have improved over the past 80 years, the Kroll process is the costly and time-consuming batch operation for the reduction of TiCl₄ and the separation of MgCl₂.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.2
• /
• pp.127-136
• /
• 2012

Many research of hand gesture recognition based on vision system have been conducted which enable user operate various electronic devices more easily. 3D position calculation and meaningful gesture classification from similar gestures should be executed to recognize hand gesture accurately. A simple and cost effective method of 3D position calculation and gesture spotting (a task to recognize meaningful gesture from other similar meaningless gestures) is described in this paper. 3D position is achieved by calculation of two cameras relative position through pan/tilt module and a marker regardless with the placed position. Fuzzy garbage model is proposed to provide a variable reference value to decide whether the user gesture is the command gesture or not. The reference is achieved from fuzzy command gesture model and fuzzy garbage model which returns the score that shows the degree of belonging to command gesture and garbage gesture respectively. Two-stage user adaptation is proposed that off-line (batch) adaptation for inter-personal difference and on-line (incremental) adaptation for intra-difference to enhance the performance. Experiment is conducted for 5 different users. The recognition rate of command (discriminate command gesture) is more than 95% when only one command like meaningless gesture exists and more than 85% when the command is mixed with many other similar gestures.

• Journal of KIISE:Information Networking
• /
• v.27 no.3
• /
• pp.301-314
• /
• 2000

As the number of World Wide Web (Web) users grows, Web traffic continues to increase at an exponential rate. Currently, Web traffic is one of the major components of Internet traffic. Also, high bandwodth usage due to Web traffic is observed during peak periods while leaving bandwidth usage idle during off-peak periods. One of the solutions to reduce Web traffic and speed up Web access is through the use of Web caching. Unfortunately, Web caching has limitations for reducing network bandwidth usage during peak periods. In this paper, we focus our attention on the use of a prefetching algorithm for reducing bandwidth during peak periods by using off-peak period bandwidth. We propose a statistical, batch, proxy-side prefetching scheme that improves cache hit rate while only requiring a small amount of storage. Web objects that were accessed many times in previous 24 hours but would be expired in the next 24 hours, are selected and prefetched in our scheme. We present simulation results based on Web proxy and show that this prefetching algorithm can reduce peak time bandwidth using off-peak bandwidth.