• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.3
• /
• pp.289-301
• /
• 2010

A structural model of the SNF(spent nuclear fuel) disposal canister for the PWR(pressurized water reactor) for about 10,000 years long term deposition at a 500m deep granitic bedrock repository has been developed through various structural safety evaluations. The SNF disposal baskets of this canister model have the array type of which four square cross section baskets stand parallel to each other and symmetrically with respect to the center of the canister section. However whether this developed structural model of the SNF disposal canister is best is not determinable yet, because the SNF disposal canister with this parallel array has a limitation in shortening the diameter for the weight reduction due to the shortest distance between the outer corner of the square section and the outer shell. Therefore, the structural safety evaluation of the SNF disposal canister with the rotated basket array which is also symmetric with respect to the canister center planes is very necessary. Even though such a canister model has not been found as yet in the literature, the structural analysis of the canister with the rotated basket array for the PWR is required for the comparative study of the structural safety of canister models. Hence, the structural analysis of the canister with the rotated basket array in which each basket is rotated with a certain amount of degrees around the center of the basket itself and arrayed symmetrically with respect to the center planes is carried out in this paper. The structural analysis result shows that the SNF disposal canister with the rotated basket array in which the SNF disposal basket is rotated as 30~35 degrees around the center of the basket itself is structurally more stable than the previously developed SNF disposal canister with the parallel basket array.

• Journal of Families and Better Life
• /
• v.14 no.4
• /
• pp.27-40
• /
• 1996

The wide range of price found in food market allows consumer reduce the cost of food purchases through comparison shopping into one more stores. Littles known however about how much can be saved by comapring price for a whole market basket of food items. This paper present evidence relating to the comparison shopping through the theories on price is dispersion and show validity constructing methods of food market basket. It is found that the savings of comparison shopping to consumers are likely to be gains in food Markets and three market basket on foods suggest in study found to be validity.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.70-76
• /
• 2013

This study investigates structural durability through the analyses of stress, fatigue life and vibration damage at bike carrier basket. As model 2 has less stress and deformation than model 1 on static structural analysis, model 2 becomes more durable than model 1. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. The amplitude deformations become highest at maximum response frequency of 2400Hz in cases of models 1 and 2. As the values of maximum equivalent stresses become within the allowable material stresses at two holes at the upper parts on models 1 and 2, these models become safe. The structural result of this study can be effectively utilized with the design of bike carrier basket by investigating prevention and durability against fatigue or vibration damage.

• Industrial Engineering and Management Systems
• /
• v.13 no.4
• /
• pp.421-431
• /
• 2014

The market basket data in the form of a binary user-item matrix or a binary item-user matrix can be modelled as a binary classification problem. The binary logistic regression approach tackles the binary classification problem, where principal components are predictor variables. If users or items are sparse in the training data, the binary classification problem can be considered as a cold-start problem. The binary logistic regression approach may not function appropriately if the principal components are inefficient for the cold-start problem. Assuming that the market basket data can also be considered as a special regression problem whose response is either 0 or 1, we propose three supervised learning approaches: random forest regression, random forest classification, and elastic net to tackle the cold-start problem, comparing the performance in a variety of experimental settings. The experimental results show that the proposed supervised learning approaches outperform the conventional approaches.

• Asian Journal of Business Environment
• /
• v.5 no.1
• /
• pp.37-41
• /
• 2015

Purpose - The study was designed to explore and examine the business relationships of the owners and the employees of Market Basket to analyze the implications of their recent turbulence and decisions. This article focused on two issues - business profit and labor union - to describe the uniqueness of this case. Design, methodology, data, and approach - This article, based on its purpose, applied all three approaches of case studies that are identified and described by Stake (1995), instrumental, intrinsic, and collective, to present the core nature of the issue and to improve and gain a clear understanding of this particular phenomenon. Results - The analysis of this case clearly indicates that seemingly dichotomous concepts of profit and employee welfare are not necessarily antithetical to each other Conclusions - The instant case of Market Basket serves as a testimonial for the rejection of the basic premises of corporate profits and labor unions. This case serves as a model and a practical example for many large retailers, especially the family operated retailers, and workers throughout the world.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.4
• /
• pp.719-728
• /
• 2009

In this study, a training program was conducted to improve the performance of the basic movement of the basket-to-handstand mount. After completion of the training program, the kinematic comparison of the before and after effects were investigated to provide scientific data about this technique. It is recommended that during P1, the center of body mass at the back should push the hip joint to flex quickly, and the shoulder joint should be maintained at a maximum angle. During P2, the body's center of mass must be accelerated so as to create enough momentum to rise efficiently for this, quick extension of both the hip and the shoulder is required. For safety during P3, it is advised that the speed upwards must be increased and that the hands, shoulders, and hip joint must be extended, as in the posture of a handstand. These results stress to coaches the importance of the bodies speed during the ascent in the motion.

• Asia pacific journal of information systems
• /
• v.18 no.2
• /
• pp.95-114
• /
• 2008

Recent interests in data mining result from the expansion of the amount of business data and the growing business needs for extracting valuable knowledge from the data and then utilizing it for decision making process. In particular, recent advances in association rule mining techniques enable us to acquire knowledge concerning sales patterns among individual items from the voluminous transactional data. Certainly, one of the major purposes of association rule mining is to utilize acquired knowledge in providing marketing strategies such as cross-selling, sales promotion, and shelf-space allocation. In spite of the potential applicability of association rule mining, unfortunately, it is not often the case that the marketing mix acquired from data mining leads to the realized profit. The main difficulty of mining-based profit realization can be found in the fact that tremendous numbers of patterns are discovered by the association rule mining. Due to the many patterns, data mining experts should perform additional mining of the results of initial mining in order to extract only actionable and profitable knowledge, which exhausts much time and costs. In the literature, a number of interestingness measures have been devised for estimating discovered patterns. Most of the measures can be directly calculated from what is known as a contingency table, which summarizes the sales frequencies of exclusive items or itemsets. A contingency table can provide brief insights into the relationship between two or more itemsets of concern. However, it is important to note that some useful information concerning sales transactions may be lost when a contingency table is constructed. For instance, information regarding the size of each market basket(i.e., the number of items in each transaction) cannot be described in a contingency table. It is natural that a larger basket has a tendency to consist of more sales patterns. Therefore, if two itemsets are sold together in a very large basket, it can be expected that the basket contains two or more patterns and that the two itemsets belong to mutually different patterns. Therefore, we should classify frequent itemset into two categories, inter-pattern co-occurrence and intra-pattern co-occurrence, and investigate the effect of the market basket size on the two categories. This notion implies that any interestingness measures for association rules should consider not only the total frequency of target itemsets but also the size of each basket. There have been many attempts on analyzing various interestingness measures in the literature. Most of them have conducted qualitative comparison among various measures. The studies proposed desirable properties of interestingness measures and then surveyed how many properties are obeyed by each measure. However, relatively few attentions have been made on evaluating how well the patterns discovered by each measure are regarded to be valuable in the real world. In this paper, attempts are made to propose two notions regarding association rule measures. First, a quantitative criterion for estimating accuracy of association rule measures is presented. According to this criterion, a measure can be considered to be accurate if it assigns high scores to meaningful patterns that actually exist and low scores to arbitrary patterns that co-occur by coincidence. Next, complementary measures are presented to improve the accuracy of traditional association rule measures. By adopting the factor of market basket size, the devised measures attempt to discriminate the co-occurrence of itemsets in a small basket from another co-occurrence in a large basket. Intensive computer simulations under various workloads were performed in order to analyze the accuracy of various interestingness measures including traditional measures and the proposed measures.

• KDI Journal of Economic Policy
• /
• v.12 no.1
• /
• pp.111-125
• /
• 1990

For the last several years, considerable criticism has been leveled against Korea's exchange rate management. While Korea was designated a currency manipulator by the U.S., domestically it is often complained that the won/dollar rate did not adequately reflect changes in Korea's export competitiveness and fluctuations in the exchange rates of major currencies. In view of this situation, Korea changed its exchange regime at the beginning of March this year from the dual currency basket system to a more flexible one, called a "market average rate regime". Under this new regime, the won rate is determined in the exchange market based upon the supply of and demand for foreign exchange and is allowed to freely fluctuate each day within a + 0.4 % range. This paper, first, seeks to evaluate Korea's exchange rate management under the dual basket regime of the 1980s, and then to construct an optimal currency basket for the won which could provide a proper indicator for exchange market intervention under the new market average rate regime. The analysis of fluctuations in the real effective exchange rate (REER) of the won indicates that the won rates in the 1980s failed not only to offset changes in relative prices between home and trading partner countries, but also to properly respond to variations in major exchange rates as further evidenced by sizable fluctuations in the nominal effective rates of the won. In other words, the currency basket regime which was adopted in 1980 for the stabilization of the REER of the won has not been operated properly, mainly because authorities often resorted to policy considerations in determining the won's rate. In the second part of the paper, an optimal currency basket for Korea is constructed, designed to minimize the fluctuations in the REER of the won without including policy considerations as a factor. It is recognized, however, that both domestic and foreign price data are not available immediately for the calculation of the REER. For this problem, the approach suggested by Lipschitz (1980) is followed, in which optimal weights for currencies in the basket are determined based upon the past correlation between price and exchange rates. When the optimal basket is applied to Korea since the mid-80s, it is found that the REER of the won could have been much more stable than it actually was. We also argue for the use of variable weights rather than fixed ones, which would be determined by the changing relationship between exchange rates and relative prices. The optimal basket, and the optimal basket exchange rate based on that basket, could provide an important medium- or long-term reference for proper exchange market intervention under the market average rate regime, together with other factors, such as developments in the current account balance and changes in productivity.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.37-49
• /
• 2012

A structural model of the SNF(spent nuclear fuel) disposal canister for the PWR(pressurized water reactor) for about 10,000 years long term deposition at a 500m deep granitic bedrock repository has been developed through various structural safety evaluations. The SNF disposal baskets of this canister model have the array type whose four square cross section baskets stand parallel to each other and symmetrically with respect to the center of the canister section. However, whether this developed structural model of the SNF disposal canister is optimal is not determinable yet. Especially, there is still a problem in weight-reduction of the canister. The cross section shape of the SNF basket should be changed to solve this problem. There are two ways in changing the cross section shape of the SNF basket; the one is to rotate the cross section itself and the other is to change the cross section shape as other shape different from the square cross section. The previous study shows that the canister with $30{\sim}35^{\circ}$ rotated basket array is structurally more stable than the canister with un-rotated parallel basket array. However, whether this canister with rotated basket array is optimal is not either determinable as yet, because it is not revealed that the canister with other cross section different from the square cross section is structurally more stable than other canisters. Therefore, the structural analysis of the SNF disposal canister with other cross section shape which is also symmetric with respect to the canister center planes is very necessary. The structural analysis of the canister with various cross section shape basket array in which each basket is arrayed symmetrically with respect to the center planes is carried out in this paper. The structural analysis result shows that the SNF disposal canister with circular cross section shape baskets located symmetrically with respect to the center of the canister section is structurally more stable than the previously developed SNF disposal canister with the parallel basket array.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.165-174
• /
• 2007

The subject of this study was male apparatus gymnastics athlete who had scored high points doing basket with 1/2 turn on parallel bars. Then 3D motion analysis were used to calculate & analyse kinematic variables of Basket with 1/2 turn to Handstand. 1. The total average time spent for Basket with 1/2 turn took $2.16{\pm}.08sec$, at the downward upward phase took $.58{\pm}0.00sec$, $.23{\pm}.00sec$, at flight phase took $.28{\pm}.01sec$, at connected area phase took $.72{\pm}0.21sec$, at rotation area phase took $.35{\pm}.14sec$. To have a successful performance, there should be faster speed and velocity to rotate at the downward upward phase, then the upward velocity and height must be used adequately. Moreover, the speed must be faster at the flight connect phase to stabilize Center of Mass(CM) for the body, and must secure more time at the rotation area to have more stable performance. 2. After handstand on parallel bars while moving CM to right hand side, and It must be performed with big and magnificent performance with putting both hand's center to far away from the parallel bars. 3. Furthermore, CM must be moved fast from downwards to right hand side, and CM must be moved fast in vertical movement at upward and flight phase to avoid CM from moving back and forth, and left and right. 4. At downwards, the subject must rotate as bis as possible using hip-joint as wide as possible and at upwards, must put his body to vertical to have stable performance. While rotating or turning, it is better to do with bigger shoulder angle and have to make sure that trunk angle must be not scattered. To perform better and more positive in basket with 1/2 turn on parallel bars, the centrifugal force must be used big and fast at downward, and at upward and flight phase, downward movement must change to vertical movement as soon as possible while turning movement must happen at handstand position. Time spent must be shorten at connected area to stabilize CM and turning must be natural as possible while securing the necessary time of movement to well-balanced. Also, the body must be vertically closed from the ground.