• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.122-126
• /
• 2008

The magnetic properties of the organic/inorganic hybrid copper-methylenediphosphonate, Cu2(O3PCH2PO3) were examined by performing the spin dimer analysis based on the extended Hckel tight binding method. In Cu2(O3PCH2PO3) the CuO3 chains made up of edge-sharing CuO5 square pyramidal units are inter-linked by O-P-O bridges. The Cu-O-Cu superexchange interactions of the CuO3 chains are negligibly weak compared with the Cu-O…O-Cu super-superexchange interactions that occur between the CuO3 chains. The spin exchange interactions of Cu2(O3PCH2PO3) are dominated by three super-superexchange interactions, which leads to a three-dimensional antiferromagnetic spin lattice. The strongest spin exchange interactions form isolated spin dimers, which suggests that, to a first approximation, the magnetic properties can be described in terms of an isolated spin dimer model.

• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.302-309
• /
• 2016

Urea-SCR system is currently regarded as promising NOx reduction technology for diesel engines. SCR system has to achieve maximal NOx conversion in combination with minimal $NH_3$ slip. In this study, model based open loop control for urea injection was developed and assessed in the European Transient Cycle (ETC) for heavy duty diesel engine. On the basis of the transient modeling, the kinetic parameters of the $NH_3$ adsorption and desorption are calibrated with the experimental results performed over the zeolite based catalyst. $NH_3$ storage or surface coverage of SCR catalyst can not be measured directly and has to be calculated, which is taken into account as a control parameter in this model. In order to reduce $NH_3$ slip while maintaining NOx reduction, $NH_3$ storage control algorithm was applied to correct the basic urea quantity. If the actual $NH_3$ surface coverage is higher than the maximal $NH_3$ surface coverage, the urea injection quantity is significantly reduced in the ETC cycle. By applying this logic, the resulting $NH_3$ slip peak can be avoided effectively. With optimizing the kinetic parameters based on standard SCR reaction, it suggests that a simplified, less accurate model can be effective to evaluate the capability of model based control in the ETC cycle.

• Applied Microscopy
• /
• 제47권3호
• /
• pp.110-120
• /
• 2017

Non-isothermal thermogravimetry (TG) measurements on melt-quenched $Bi_xSe_{100-x}$ specimens (x=0, 2.5, 7.5 at%) were made at a heating rate ${\beta}=10^{\circ}C/min$ in the range $T=35^{\circ}C{\sim}950^{\circ}C$. The as-measured TG curves confirm that $Bi_xSe_{100-x}$ samples were thermally stable with minor loss at $T{\leq}400^{\circ}C$ and mass loss starts to decrease up to $600^{\circ}C$, beyond which trivial mass loss was observed. These TG curves were used to estimate molar (Se/Bi)-ratios of $Bi_xSe_{100-x}$ samples, which were not in accordance with initial composition. Shaping features of conversion curves ${\alpha}(T)-T$ of $Bi_xSe_{100-x}$ samples combined with a reliable flow chart were used to reduce kinetic mechanisms that would have caused their thermal mass loss to few nth-order reaction models of the form $f[{\alpha}(T)]{\propto}[1-{\alpha}(T)]^n$ (n=1/2, 2/3, and 1). The constructed ${\alpha}(T)-T$ and $(d{\alpha}(T)/dT)-T$ curves were analyzed using Coats-Redfern (CR) and Achar-Brindley-Sharp (ABS) kinetic formulas on basis of these model functions, but the linearity of attained plots were good in a limited ${\alpha}(T)-region$. The applicability of CR and ABS methods, with model function of kinetic reaction mechanism R0 (n=0), was notable as they gave best linear fits over much broader ${\alpha}(T)-range$.

• Nutrition Research and Practice
• /
• 제14권1호
• /
• pp.32-44
• /
• 2020

BACKGROUND/OBJECTIVE: We have previously designed the anti-cancer food scoring model (ACFS) 1.0, an evidence-based quantitative tool analyzing the anti-cancer or carcinogenic potential of diets. Analysis was performed using simple quantitative indexes divided into 6 categories (S, A, B, C, D, and E). In this study, we applied this scoring model to wider recipes and evaluated its nutritional relevance. MATERIALS/METHODS: National or known regional databases were searched for recipes from 6 categories: Korean out-dining, Korean home-dining, Western, Chinese, Mediterranean, and vegetarian. These recipes were scored using the ACFS formula and the nutrition profiles were analyzed. RESULTS: Eighty-eight international recipes were analyzed. All S-graded recipes were from vegetarian or Mediterranean categories. The median code values of each category were B (Korean home-dining), C (Korean out-dining), B (Chinese), A (Mediterranean), S (vegetarian), and D (Western). The following profiles were correlated (P < 0.05) with ACFS grades in the univariate trend analysis: total calories, total fat, animal fat, animal protein, total protein, vitamin D, riboflavin, niacin, vitamin B₁₂, pantothenic acid, sodium, animal iron, zinc, selenium, and cholesterol (negative trends), and carbohydrate rate, fiber, water-soluble fiber, vitamin K, vitamin C, and plant calcium (positive trends). Multivariate analysis revealed that animal fat, animal iron, and niacin (negative trends) and animal protein, fiber, and vitamin C (positive trends) were statistically significant. Pantothenic acid and sodium showed non-significant negative trends (P < 0.1), and vitamin B₁₂ showed a non-significant positive trend. CONCLUSION: This study provided a nutritional basis and extended the utility of ACFS, which is a bridgehead for future cancer-preventive clinical trials using ACFS.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.294-298
• /
• 2002

다결정 층상 페로브스카이트형 $La_{2.1}Sr_{1.9}Mn_3O_{10}$를 성공적으로 합성하였으며, $La_{2.1}Sr_{1.9}Mn_3O_{10}$의 열기전력, 전기전도 및 자기적 특성을 조사하였다. 0.85T의 자장의 인가 시 자기전이 온도 $T_c$보다 매우 낮은 120K에서 금속-비금속전이 및 약 120%의 음의 $MR(-{\Delta}{\rho}/{\rho}_0)$이 관측되었다. 고온영역에서 small polaron의 특징중의 하나인 매우 큰 전기적 저항 및 열기전력의 활성화 에너지 차가 관측되었다. 전체적인 실험 결과는 small polaron hopping 모델로 설명가능 하였다.

• Computers and Concrete
• /
• 제34권1호
• /
• pp.33-48
• /
• 2024

This paper presents the detailed experimental and analytical investigation on the evolution of static (E_s) and dynamic modulus of elasticity (E_d) of concrete having 0%, 35%, and 50% FA used as partial cement replacement. Destructive and non-destructive tests were conducted on cylindrical specimens to evaluate the compressive strength and MoE of concrete in compression at the age of 28, 56, 90, and 150 days for all mixes. Experimental results show that the concrete having 35% FA achieved compressive strength and MoE similar to plain concrete at the age of 90 days, while 50% FA concrete attained satisfactory compressive strength and MoE at the age of 150 days. The comprehensive statistical analysis has been carried out in two ways on the basis of the experimental results. Firstly, the 28-day crushing strength of plain concrete in compression was used to design the models for the prediction of E_s and E_d of fly ash concrete at any age and percentage replacement of FA. Secondly, using the values of UPV and RHN, models have been developed to predict the age or time-dependent E_s and E_d of fly ash concrete. These models will be helpful in assessing the E_s and E_d of fly ash concrete without knowing the 28-day crushing strength of plain concrete in compression in the laboratory. Hence, the suggested models in the present study will be beneficial in conducting the health assessment of fly ash based concrete structures.

• 한국전자파학회논문지
• /
• 제12권6호
• /
• pp.931-939
• /
• 2001

DBS(Direct Broadcast Satellite) 수신용 radial-line slot antenna(RLSA)의 설계를 위한 슬롯을 통한 결합 특성을 해석하였다. RLSA에서 이미 제안된, narrow wall이 주기 경계 조건(periodic boundary condition)을 만족시키고 wide wall에 슬롯이 주기적으로 배열되어 있는 구형 도파관 모델을 이용하였다. 자장 적분 방정식과 필요한 그린 함수를 유도하여 모멘트 법으로 풀었다. 이때 수치 해석의 효율을 극대화하고 그린 함수에 의한 특이점 문제를 해결하기 위해 entire domain 기저 함수와 sub-domain 기저 함수를 모두 사용하였다. 한편 그린 함수를 빠르게 계산하기 위한 가속화 방법으로 구형 도파관 영역은 Ewald합 기법을, 반공간 영역은 Shanks 변환을 이용하였다. 시뮬레이션 결과로부터 RLSA의 설계에 이용되는 다양한 변수들이 결합에 미치는 영향을 예측할 수 있었다.

• Journal of Magnetics
• /
• 제13권2호
• /
• pp.43-52
• /
• 2008

The objective of this paper is to review the magnetic and magneto-transport properties of Co/$Co_2TiSn$ consisting of two metallic magnetic phases that are antiferromagnetically exchange-coupled at the phase boundary. The bulk Co/$Co_2TiSn$ system, which has a $Co_2$TiSn Heusler alloy precipitates in the hexagonal Co matrix, showed an unusual coercivity change with a concurrent change in temperature, and was modeled on the basis of a wall formation caused by exchange coupling at the phase boundary. For measurements of magneto-transport properties, Co/$Co_2TiSn$ thin films that had two-magnet phases were deposited using a magnetron sputtering system with a composite target. The magnetization process in the films is also explained on the basis of the model of wall formation at the phase boundary. Annealed Co/$Co_2TiSn$ films showed a 0.12% GMR effect, indicating the scattering of polarized conduction electrons due to the antiparallel exchange coupling at the phase boundary. The scattering process of conduction electrons at the phase boundary was modeled with relation to the magnetization process.

• 한국군사과학기술학회지
• /
• 제17권2호
• /
• pp.223-234
• /
• 2014

This paper proposes a flexible and highly reusable modeling methodology for a next-generation combat entity which enables joint analysis of performance/engagement effectiveness. According to the scope of the proposed work, the paper is divided into two parts; Part 1 focuses on a conceptual model design, whereas Part 2 proposes detailed model specification and implementation. In Part 1, we, first, classify the combat entity model as combat logic and battlefield function sub-models for joint analysis. Based on the sub-models, we propose two dimensional model partition method, which creates six groups of a single combat entity model by two dimensions: three-activity and two-abstraction. This grouping enables us to reconfigure the combat entity model by sharing the same interface within the group, and the same interface becomes the fundamental basis of the flexible model composition. Furthermore, the proposed method provides a model structure that effectively reflects the real world and maximizes the multi-level reusability of a combat entity model. As a case study, we construct a model design for anti-surface ship warfare. The case study proves enhancement of model reusability in the process of scenario expansion from pattern running to wire guided torpedo operations.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1489-1500
• /
• 2018

Partial shading analysis of large-scale photovoltaic (PV) arrays has recently become a theoretically and numerically challenging issue, and it is necessary for PV system designers. The main contributions of this study are the following: 1) A PSIM-based macro-model was employed because it is remarkably fast, has high precision, and has no convergence issues. 2) Three types of equivalent macro-models were developed for the transformation of a small PV sub-array with uniform irradiance to a new macro-model. 3) On the basis of the proposed new macro-model, a tearing method was established, which can divide a large-scale PV array into several small sub-arrays to significantly improve the efficiency improvement of a simulation. 4) Three platforms, namely, PSIM, PSpice, and MATLAB, were applied to evaluate the proposed tearing method. The proposed models and methods were validated, and the value of this research was highlighted using an actual large-scale PV array with 2420 PV modules. Numerical simulation demonstrated that the tearing method can remarkably improve the simulation efficiency by approximately thousands of times, and the method obtained a precision of nearly 6.5%. It can provide a useful tool to design the optimal configuration of a PV array with a given shading pattern as much as possible.