• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.126-135
• /
• 1995

An exhaust muffler is one of the simple and effective means to meet the demand for a quiet vehicle, and it deserves a close attention to effectively reduce the engine noise. The transfer function technique is one of the tools that have been used to analyze the noise characteristics of the exhaust muffler. In this paper we obtained a transfer function using the forward-going and backward-going components of sound pressure in the exhaust muffler, which is compatible wiht lattice filter algorithm. This form of transfer function is obtained for the basic elements of a muffler, such as uniform tube, open termin- ation, closed termination, anechoic termination, expansion, contraction, extended-tube resonator, hole, Helmholtz resonator, and concentric hole-cavity resonator. The results are combined to produce the transfer function of various types of mufflers. With this transfer function we calculate the transmission and insertion losses of mufflers, and examined the effects of various design parameters. Comparisons were made between the calculation and experimental results, which showed a good agreement, and we conclude that the transfer function of lattice form can be used to analyze the noise characteristics of the exhaust mufflers.

• 한국전자파학회논문지
• /
• 제23권7호
• /
• pp.844-847
• /
• 2012

메타 물질의 한 형태인 LHTL(Left-Handed Transmission Line)과 기존의 전송 선로 형태인 RHTL(Right-Handed Transmission Line)을 이용하여 광대역 I-Q 벡터 신호 생성을 위한 $90^{\circ}$ 커플러를 설계, 제작하고 측정을 하였다. LHTL과 RHTL 모두 커패시터와 인덕터를 이용하여 합성 전송 선로 형태로 구성함으로써, 그 크기를 최소화 하였다. 또한, 제안된 커플러 제작에 필요한 Wilkinson 전력 분배기를 합성 RHTL을 이용하여 간단하게 구현함으로써 전체 회로의 크기를 $11mm{\times}12mm$로 만들 수 있었다. 주파수 범위 0.8~1.25 GHz에 대해 출력의 위상 차이가 $90^{\circ}{\pm}5^{\circ}$를 유지함으로써 광대역 $90^{\circ}$ 커플러를 작은 크기로 만들 수 있었다. 동 주파수 범위에 대해 삽입 손실을 1.6 dB 이하로, 반사 손실을 10.1 dB 이상으로 유지 가능했다. 필자가 아는 한 이는 그 주파수 대에서 가장 작은 광대역 $90^{\circ}$ 커플러이며, MMIC(Monolithic Microwave Integrated Circuit)로 만들 경우 그 크기를 훨씬 더 줄일 수 있을 것이다.

• 조명전기설비학회논문지
• /
• 제19권8호
• /
• pp.77-84
• /
• 2005

수명예측을 하기 위한 기초 자료로 ACSR의 기계적 시험의 일종인 인장시험이 필요하다. 이 인장시험의 결과들이 경년 변화에 대해 어떤 상관관계가 있는가를 파악하여 통계적으로 처리함으로써 수명예측을 해 볼 수 있다. 통계적 처리기법으로는 회귀분석 방법이 일반적이다. 본 연구에서는 ACSR의 인장시험을 건전 전선과 인공화염으로 열화시킨 전선과, 산불 화염 의해 수거된 열화된 전선에 대해 실시하였다. 수명예측의 한계는 캐나다 Ontario Hydro Research의 기준인 정격 인장강도의 20[%] 손실점을 택하였다. 본 연구에 이용된 ACSR의 규격은 ACSR $480[mm^2]$을 대상으로 하여 비선형 회귀분석을 실시하여 예측수명을 제시하였다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제7권3호
• /
• pp.49-56
• /
• 1993

본 논문에서는 지하전력구 환경하에서 통신신뢰도가 높고 확장성이 용이하며 복합전송(음성+데이터+영상신호)이 가능한 누설동축케이블을 전송 매체로 하여 지하전력구내 신호전송시스템을 설계 및 설치하였다.그리고 시험시스템에서 각종 전송특성시험을 실시하여 성능을 평가하였다. 음성신호의 경우, 전송손실 특성은 설계치보다 5∼10[dB]정도의 수신레벨이 향상되었으며 통화 품질평가시험에서 통화강도가 3(QSA 값), 명료도가 4(QRK 값)정도의 양호한 특성을 나타냈다. 또한 데이터 및 영상신호 전송특성에 대한 감시제어기능시험에서는 98[%]의 통신성공율을 확보할 수 있었다.그리고 전송로 및 시스템의 전송특성 측정결과에 의해서 중계기 없이 전송범위를 6[km]까지 확대할 수 있는 LCX 통신시스템을 전력구내 종합관리 시스템의 기본 구성방법으로 제시하였다.

• 한국통신학회논문지
• /
• 제28권1B호
• /
• pp.64-70
• /
• 2003

In order to provide seamless wireless Internet service, the basic mobile IP protocol should be enhanced to solve packet loss problem from large registration latency because frequent handoffs occur in cellular networks. In this paper, we suggest a new micro-mobility management protocol based on MPLS while supporting Qos, and evaluate its performance using simulation. We use MPLS label switching techniuqe in cellular access networks to simplify location management and speed up packet transmission. We adopt context transfer procedure to minimize the delay needed to attain prior level of service after handoff Packet loss can be minimized during handoff by transmitting received packets from old BSLER to new BSLER using a spliced LSP between them. Simulation results show that the proposed MPLS-based micro-mobility management protocol provides a seamless handoff and supports QoS of user traffic.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1248-1256
• /
• 2008

In this paper, basic characteristics of transmission line employing PPGM (periodically perforated ground metal) were investigated using theoretical and experimental analysis.According to the results, unlike the conventional PBG (photonic band gap) structures, the characteristic impedance of the transmission line employing PPGM structure showed a real value, which exhibited a very small dependency on frequency. The transmission line employing PPGM structure showed a loss (per quarter wave length) higher by $0.1{\sim}0.2\;dB$ than the conventional microstrip line. According to the investigation of the dependency of RF characteristic on ground condition, the RF characteristic of the transmission line employing PPGM structure was hardly affected by the ground condition in the frequency lower than Ku band, but fairly affected in the frequency higher than Ku band, which indicated that coplanar waveguide employing PPGM structure was optimal for RF characteristic and reduction of size. Considering above results, impedance transformer was developed using coplanar waveguide with PPGM structure for the first time, and good RF characteristics were observed from the impedance transformer. In case that {\lambda}/4$ impedance transformer with a center frequency of 9 GHz was fabricated for a impedance transformation from 20 to10 {\Omega}$, the line width and length were 20 and $500\;{\mu}m$, respectively, and its size was only 0.64 % of the impedance transformer fabricated with conventional microstrip lines. Above results indicate that the transmission line employing PPGM is a promising candidate for a development of matching and passive elements on MMIC.

• 한국농공학회논문집
• /
• 제59권6호
• /
• pp.1-8
• /
• 2017

The purpose of this study was to provide basic data for development of environmental design technology for greenhouses constructed in reclaimed lands. We analyzed the climatic conditions around seven major reclaimed land areas in Korea, which have a plan to install advanced horticultural complexes. The characteristics of heating load through the thermal environment measurement of the greenhouse in Saemangeum were analyzed. The part to be applied to the environmental design of the greenhouses in reclaimed lands were reviewed. The overall heat transfer coefficient of the experimental greenhouse with the aluminum screen and multi-layer thermal curtain averaged $3.79W/m^2^{\circ}C$. It represents a 44 % heat savings rate compared with plastic greenhouses with a single covering, which was significantly lower than that of the common greenhouses with 2-layer thermal curtains. This is because the experimental greenhouse was installed on reclaimed land and wind was stronger than the inland area. Among the total heating load, the transmission heat loss accounted for 96.4~99.9 %, and the infiltration loss and the ground heat exchange were low. Therefore, it is necessary to take countermeasures to minimize the transmission heat loss for greenhouses constructed in reclaimed lands. As the reclaimed land is located on the seaside, the wind is stronger than the inland area, and the fog is frequent. Especially, Saemangeum area has 2.6 times stronger wind speed and 3.4 times longer fog duration than the inland area. In designing the heating systems for greenhouses in reclaimed lands, it is considered that the maximum heating load should be calculated by applying the wind coefficient larger than the inland area. It is reasonable to estimate the operation cost of the heating system by applying the adjustment factor 10 % larger than the average in calculating the seasonal heating load.

• ETRI Journal
• /
• 제23권3호
• /
• pp.97-105
• /
• 2001

$1.6\;{\mu}m$ emission originated from $Pr^{3+}:\;(^3F_3,\;^3F_4)\;{\longrightarrow}\;^3H_4$ transition in $Pr^{3+}-\;and\;Pr^{3+}/Er^{3+}$-doped selenide glasses was investigated under an optical pump of a conventional 1480 nm laser diode. The measured peak wavelength and fullwidth at half-maximum of the fluorescent emission are ~1650nm and 120nm, respectively. A moderate lifetime of the thermally coupled upper manifolds of ${\sim}212{\pm}10{\mu}s$ together with a high stimulated emission cross-section of ${\sim}(3{\pm}1){\times}10^{-20}\;cm^2$ promises to be useful for $1.6{\mu}m$ band fiber-optic amplifiers that can be pumped with an existing high-power 1480 nm laser diode. Codoping $Er^{3+}$ enhances the emission intensity by way of a nonradiative $Er^{3+}:\;^4I_{13/2}\;{\longrightarrow}\;Pr^{3+}:\;(^3F_3,\;^3F_4)$ energy transfer. The Dexter model based on the spectral overlap between donor emission and acceptor absorption describes well the energy transfer from $Er^{3+}$ to $Pr^{3+}$ in these glasses. Also discussed in this paper are major transmission loss mechanisms of a selenide glass optical fiber.

• 전기전자학회논문지
• /
• 제7권1호
• /
• pp.63-71
• /
• 2003

본 논문에서는 이동 애드혹 네트워크에서 신뢰성 향상을 위한 QoS 지원 DSR 프로토콜을 제안하였다. 제안된 알고리즘에서는 DSR을 기본 프로토콜로서 QoS를 지원하도록 구성하였고, 송수신 노드 사이의 중간노드들을 QoS 지원 노드로서 이용하였다. 이동 애드혹 네트워크 특성상 노드들의 움직임은 신뢰성 있는 데이터 전송을 제한하는 문제점이 있다. 이러한 문제점을 해결하기 위하여, 송신노드는 수신노드와 QoS 링크를 설정하고 데이터 전송 중 노드의 움직임으로 데이터 전송경로 상실을 발견한 중간 노드는 전송중인 데이터를 임시 저장한 후 수신노드까지의 새로운 경로를 탐색한 후 저장된 데이터를 수신노드까지 안전하게 전송한다. 그 결과로서, 제안된 QoS 지원 알고리즘은 움직임이 적은 네트워크에서는 100[%]에 근접하는 신뢰성을 보였고, 기존의 이동 애드혹 네트워크보다 평균 3.7737[%] 증가한 96[%]의 데이터 수신율을 보장하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.234.2-234.2
• /
• 2015

Recently, the electromagnetically-induced transparency (EIT)-like effect in metamaterials has attracted enormous interest. Metamaterial analogs of EIT enable promising applications in slow-light devices, low-loss metamaterial, quantum optics, and novel sensors. In this work, we experimentally and numerically studied a bilayer metamaterial for controllable EIT-like spectral response at microwave frequencies. Bilayer metamaterial consists of two snake-shape resonators (SSRs) with one and two bars. The transmission spectra were measured in a frequency range of 4 - 8 GHz in an anechoic chamber at normal incidence. It is found that two SSRs in the metamaterial are activated in bright modes, and the coupling between two bright modes leads to the EIT-like effect, which results in the enhanced transmission at 5.61 GHz. Furthermore, we confirm that the EIT-like feature could be controlled by adjusting the geometric parameters of metamaterial structure. Our work provides a way to tunable EIT-like effect and various potential applications including filters, sensors, and other microwave devices.