• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.279-282
• /
• 2011

Dye-sensitized solar cell (DSSC); an alternate energy source harvester has gained some attractive features such as high-energy conversion efficiency low production cost. Dye-sensitizer is a basic component of DSSC, which affecting the performance of the energy conversion efficiency. Current research has been focusing on development of high efficiency, metal-free dye-sensitizers, which would be more environmental friendly. We had successfully explored synthetic route to 6,6'-(1,2,5-oxadiazole-3,4-diyl)dipyridine-2,4-dicarboxylic acid (3A) which has been used as organic sensitizer. Investigation of light conversion efficiency (${\eta}$) of the compound uses standard measurement condition (one sun simulated irradiation, AM 1.5, 100 mW/$cm^2$) showed that it could reach 1.00% ($J_{SC}=2.63\;mAcm^{-2}$, $V_{OC}$=0.64 V and FF=0.59). Under the same conditions, the ruthenium complex (N719) gave the conversion efficiency as high as 4.02%($J_{SC}=10.50\;mAcm^{-2}$, $V_{OC}$=0.67V and FF=0.57).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.63-63
• /
• 2010

Using both experimental and theoretical approaches, we have investigated the adsorption properties of an organic molecule (HATCN), which is used in OLEDs as an efficient hole injection layer, on metal and inert surfaces. We have also studied the structural and electronic properties of such interfaces and the dependences on deposition thickness. We have observed different trends in work function changes with different surfaces. Our photoelectron spectroscopic measurements have revealed an abnormal phenomenon in HATCN on a metal (Cu) surface: the work function decreases at lower coverage (~monolayer) of HATCN on a metal (Cu) surface, but it increases back and becomes higher than that of a bare Cu surface at higher coverage. It has, on the contrary, been observed that the work function of graphene surface just increases as the HATCN coverage increases. Our first-principles density functional calculations has not only verified our experimental observations, but also disclosed the underlying mechanism of such abnormal and different work function behaviors. We have found that the change in work function results from mutual polarization induced by the geometrical deformation and the bond dipole formed at the interface due to the charge redistribution. At low coverage of HAT-CN on Cu substrate, the former reduces the work function significantly by pulling down the vacuum level, while the latter tends to push up the vacuum level resulting in the work function increase.

• Carbon letters
• /
• v.10 no.1
• /
• pp.33-37
• /
• 2009

Activated carbon (AC) is one of the most effective adsorbents for organic compounds because of their extended surface area, high adsorption capacity, microporous structure and special surface reactivity. The composites of pH-sensitive hydrogel and activated carbon were prepared in order to improve the loading capacity of drug. The pH-sensitive hydrogel matrix swelled well in the basic condition to release the drug loaded in AC. The release of drug was controlled depending on both the pH due to the ionization of the carboxylic acid group and the AC due to the surface properties.

• Journal of Integrative Natural Science
• /
• v.9 no.2
• /
• pp.94-102
• /
• 2016

The crystal structure of the potential active 6-ethoxy-3-phenyl-5a,9a-dihydro-3H-chromen[4,3-c][1,2]oxazole-3a(4H)-carbonitrile ($C_{19}H_{15}N_2O_3$) has been determined from single crystal X-ray diffraction technique. The title compound crystallizes in the monoclinic space group C2/c with unit cell dimension a= 29.3026(9) ${\AA}$, b= 6.7695(2) ${\AA}$ and c= 19.7597(6) ${\AA}$ [${\alpha}= 90^{\circ}$, ${\beta}= 125.709(10)^{\circ}$ and ${\gamma}= 90^{\circ}$]. Single crystals suitable for X-ray diffraction were obtained by slow evaporation method, the isoxazole and six membered pyran rings adopts envelope conformation. The crystal packing of the molecules is stabilized by the weak $C-H{\ldots}N$ hydrogen bond interaction.

• Journal of Integrative Natural Science
• /
• v.9 no.2
• /
• pp.103-112
• /
• 2016

The crystal structure of the potential active Methyl 8-bromo-3-phenyl-5a,9a-dihydro-3H-chromen [4,3-c][1,2] isoxazole-3a(4H)-carboxylate ($C_{18}H_{15}BrNO_4$) has been determined from single crystal X-ray diffraction technique. The title compound crystallizes in the triclinic space group Pī with unit cell dimension a=8.3129 (3) ${\AA}$, b=9.5847 (4) ${\AA}$ and c=11.1463(4) ${\AA}$ [${\alpha}=98.457(3)^{\circ}$, ${\beta}=102.806(2)^{\circ}$ and ${\gamma}=105.033(5)^{\circ}$]. Single crystals suitable for X-ray diffraction were obtained by slow evaporation method, the isoxazole and six membered pyran rings adopts envelope conformation. In the crystal, molecules are linked via pairs of inter molecular $C-H{\ldots}O$ hydrogen bonds to form dimmers.

• Journal of Integrative Natural Science
• /
• v.8 no.1
• /
• pp.19-29
• /
• 2015

In view of the growing medicinal importance of chromene and its derivatives, the single crystal X-ray diffraction study was carried out for the potential active 4,6-dimethyl-9-phenyl-8,12-dioxa-4,6-diazatetracyclo [8.8.0.02,7.013,18]octadeca-2(7),13,15,17-tetraene-3,5,11-trione-2-ethoxyphenyl (2E)-but-2-enoate ($C_{18}H_{20}N_2O_5$). In the title compound are two molecules exist in the asymmetric unit. It crystallizes in the monoclinic space group $P2_1/c$ with unit cell dimension a=14.608(3) ${\AA}$, b=12.845(3) and c= 17.781(4) [alpha & gamma=$90^{\circ}$ beta=$91.233(5)^{\circ}$]. Both pyran and pyran ring of the chromene moiety adopts sofa conformation in the molecule A & B. The crystal structure is stabilized by intramolecular C-H...O hydrogen bond interaction.

• Journal of Integrative Natural Science
• /
• v.3 no.3
• /
• pp.168-173
• /
• 2010

Novel porous silicon chip exhibiting dual optical properties, both Frbry-Perot fringe (optical reflectivity) and photoluminescence had been developed and used as chemical sensors. Porous silicon samples were prepared by an electrochemical etch of p-type sillicon wafer (boron-doped, <100> orientation, resistivity 1 - 10 ${\Omega}$). The ething solution was prepared by adding an equal volume of pure ethanol to an aqueous solution of HF (48% by weight). The porous silicon was illuminated with a 300 W tungsten lamp for the duration of etch. Ething was carried out as a two-electrode Kithley 2420 preocedure at an anodic current. The surface of porous silicon was characterized by FT-IR instrument. The porosity of samples was about 80%. Three different types of porous silicon, fresh porous silicon (Si-H termianated), oxidized porous silicon (Si-OH terminated), and surface-derivatized porous silicon (Si-R terminated), were prepared by the thermal oxidation and hydrosilylation. Then the samples were exposed to the wapor of various organics vapors. such as chloroform, hexane, methanol, benzene, isopropanol, and toluene. Both reflectivity and photoluminescence were simultaneously measured under the exposure of organic wapors.

• Journal of Integrative Natural Science
• /
• v.8 no.3
• /
• pp.192-203
• /
• 2015

In view of the growing medicinal importance of pyrazole and its derivatives, the single crystal X-ray diffraction study was carried out for the potential active 2-Benzyl-3-[3-(4-bromo-phenyl)-1-phenyl-1H-pyrazol-4yl]-4,6-dioxo-5-phenyl-octahydro-pyrrolo[3,4-C]pyrrole-1-carboxylic acid ethyl ester ($C_{37}H_{31}BrN_4O_4$, H2O). In the title compound are two molecules exist in the asymmetric unit. It crystallizes in the monoclinic space group $P{\hat{i}}$ with unit cell dimension $a=13.361(18){\AA}$, $b=13.424(17){\AA}$ and $c=21.649(2){\AA}$ [${\alpha}=80.745(9)^{\circ}$, ${\beta}=79.770(10)^{\circ}$ and ${\gamma}=60.788(6)^{\circ}$]. The pyrazole ring adopts planar conformation. The sum of the bond angles at nitrogen atom of the pyrazole ring indicates the $Sp^2$ hybridized state. The crystal structure is stabilized by intramolecular C-H...O hydrogen bond interaction.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.211-220
• /
• 2013

The characteristic fluorescence properties of quercetin (QCT) and apigenin (API) were studied in various $CH_3OH-H_2O$ and $CH_3CN-H_2O$ mixed solvents. The structure of QCT is completely planar. API is not planar at the ground state but becomes nearly planar at the excited state. If the molecules are excited to the $S_1$ state in organic solvents, QCT exhibits no fluorescence due to excited state intramolecular proton transfer (ESIPT) between the -OH and the carbonyl oxygen, but API shows significant fluorescence because ESIPT occurs slowly. If the molecules are excited to the $S_2$ state, both QCT and API exhibit strong $S_2{\rightarrow}S_o$ emission without any dual fluorescence. As the $H_2O$ composition of both solvents increases, the fluorescence intensity decreases rapidly due to the intermolecular hydrogen bonding interaction. The theoretical calculation further supports these results. The change in fluorescence properties as a function of the solvatochromic parameters was also studied.

• Journal of Integrative Natural Science
• /
• v.6 no.4
• /
• pp.197-204
• /
• 2013

The crystal structure of the potential active 4,6-dimethyl-9-phenyl-8,12-dioxa-4,6-diazatetracyclo [8.8.0.02,7.013,18] octadeca-2(7),13,15,17-tetraene-3,5,11-trione 2-ethoxyphenyl (2E)-but-2-enoate ($C_{22}H_{18}N_2O_5$) has been determined from single crystal X-ray diffraction data. In the title compound crystallizes in the monoclinic space group $P_12_1/c_1$ with unit cell dimension a=15.2039(8), b=12.3888(6) and c= 9.8162(5) [alpha & $gamma=90^{\circ}$ beta=98.113(2)]. In the structure fused pyrone and pyran rings each adopt a sofa/envelop conformation. The crystal structure is stabilized by intramolecular C-H... O hydrogen bond interaction.