• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.57-57
• /
• 2011

본 실험에서는 메타 아라미드 섬유의 basic dye에 대한 염색성 특히, 물과 acetophenone을 적용한 수계 염색과 친환경 염색 매개체인 이산화탄소 초임계유체를 사용한 염색을 수행한 후에 염색된 시료에 대한 염색성을 평가하였다. 수계염색의 경우, co-solvent carrier로 acetophenone 사용하였으며, 초임계유체 염색에서는 ethanol을 co-solvent로 사용하였다. 염색된 시료의 염색성 평가는 색차계를 사용하여 실시하였으며, 최대흡수파장에서 표면반사율에 따른 Kubelka-Munk식을 적용하여 K/S값을 계산하였다. 수계 및 초임계 염색에 의해 염색된 시료가 동일한 K/S 값을 가지기 위해서는 초임계염색이 상대적으로 높은 농도의 염료가 요구되어졌다. 또한 UV-vis. 분광분석법과 광학현미경을 통한 염색시료의 염색성의 평가가 이루어졌다.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.27-32
• /
• 2007

This study focused on estimating the feasibility of a strong basic anion exchanger (PA312OH) as a sorbent for the removal of residual reactive dye and saving chemicals and water. Cellulose reactive dye C.I.RB49 was tested because reactive dye is the largest single group of dyes and that dye needs larger amount of inorganic salts as dyeing agent but nearly 50% of reactive dyes may be lost to the effluent. The adsorption characteristics of PA312OH for C.I.RB49 were as follows. Ion-selectivity among the dye and inorganic salts was Dye > ${SO_4}^{2-}$ > ${CO_3}^{2-}$ > $Cl^-$. C.I.RB49 was exchanged more than 3 times ${SO_4}^{2-}$ and ${CO_3}^{2-}$ and $Cl^-$ was not exchanged absolutely. The exchanging velocity was increased exponentially with increasing temperature. This result is positive effect on treating the high temperature dyeing process wastewater. The exchanged dye percents to initial were 96.8% and 99% at flow rate 20.5 mL/min. and 3.7 mL/min.. The exchanging capacity of PA312OH for C.I.RB49 was 215.2 mg/g at conc.=369.2 mg/L, Temp.=$25^{\circ}C$. 74% inorganic salts were recrystallized from real dark reactive color dyeing wastewater treated with PA312OH.

• Textile Coloration and Finishing
• /
• v.2 no.1
• /
• pp.21-30
• /
• 1990

In order to obtain high dye uptake initially, polyethylene terephthalate (PET) filaments were dyed with C.I.Disperse Orange 3 and Red 1 in mixed solvents of tetrachloroethylene acidic solvent, ethyl alcohol and tetrachloroethylene basic solvent, DMF. The dyeing behavior in the mixed solvent of tetrachloroethylene and basic solvent, DMF, the initial uptake of disperse dyes increased rapidly. The shrinkage of PET increased when the solubility parameter values of PET fiber and mixed solvent approached graduately.

• Journal of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.179-184
• /
• 1965

Korean acid clays and Japanese acid clay were 1 N KCl solution and then their acidities were determined by measuring pH of the filtrates produced. And on examining the effect of neutral salt solution, such as KCl, NaCl, $BaCl_2,\;Pb(NO_3)_2\;and\;CuSO_4$, on the acidity, it was found that the effect decreased in order mentioned above and this situation proved to be in accord with Lyotrope series, i.e., the order of $K^+>Na^+>Ba^{++}>Pb^{++}>Cu^{++}.$ And after adsorbing cation, $Al_2O_3\;and\;Fe_2O_3$ which dissolved out of acid clay were measured, with the result that the amounts dissolved out were nearly proportional to acidity. This result accords with Kobayashi and Yamamoto's theory that the cause for acidity of clays is due to the fact that HCl which is formed initially by exchange of cation reacts with solid clay, and then chlorides dissolved out bring about hydrolysis, then resulting in the second formation of HCl. On measuring the rate which acid clay adsorbed dye in aqueous solution of basic and acid dyes, it was found that acid dye had no relation to acidity, and though it was not adsorbed by acid clay, the adsorption rate of basic dye was proportional to acidity. After adsorbing basic dye, pH was proportional to both acidity of solid acid and its adsorption rate of dye. Hence, it was concluded that the adsorption of basic dye was in accord with adsorption mechanism of neutral salt. This study led to find the acidic cause of solid acid and its adsorption mechanism of dye in aqueous solution.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.6
• /
• pp.992-1001
• /
• 1996

The binding of polyethylene glycol (PEG, average molecular weight 600) to cotton fabrics was achieved by using pad-dry-cure process in the presence of citric acid, MgCl3·6H3O, DMDHEU, and TEAHCL. Treated fabrics were dyed with direct, acid, and basic dye. Wrinkle recovery angles, durable press rate, wettability, dyeability and color fastness to washing of all treated cottons were evaluated. The results of this study were as follows: 1. The wrinkle resistance of the PEG treated cottons was increased by increasing PEG and DMDHEU concentration. 2. The wettability of the PEG treated cottons was decreased by increasing PEG and DMDHEU concentration, increased by increasing TEAHCL concentration. 3. PEG/DMDHEU/TEAHCL treated cottons had greater affinity on direct, acid, and basic dye than untreated cottons, and dyeability of the modified cottons was improved compare to untreated fabrics. 4. Color fastness to washing of the PEG/DMDHEU/TEAHCL treated cottons was good except for the wash fastness of the direct dye.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4382-4386
• /
• 2011

$TiO_2$ hollow spheres were fabricated by using $SiO_2$ as an inorganic template. Spherical $SiO_2$ particles were coated by $TiO_2$ through the nucleation process, and then the core $SiO_2$ part was eliminated by using HF solution. Finally, $TiO_2$ hollow spheres were obtained. The size of the $TiO_2$ hollow spheres was about 300-400 nm and the thickness of the hollow wall was about 20-30 nm. The hollow has several holes whose diameters were within 100-200 nm. Dye-sensitized solar cells fabricated by using the $TiO_2$ hollow spheres were characterized. The solar conversion efficiency of the cell was 8.45% when $TiO_2$ hollow spheres were used as a scattering material, while it was 4.59% when $TiO_2$ hollow spheres were used as a normal electrode material.

• Journal of Environmental Science International
• /
• v.25 no.12
• /
• pp.1717-1726
• /
• 2016

In this study, the reductive decolorization of three acid and basic dyes using modified zero-valent iron (i.e., acid-washed iron (Aw/Fe) and palladium coated iron (Pd/Fe)) at various pH conditions (pH 3~5) was experimentally investigated and the decolorization characteristics were evaluated by analyzing the absorbance spectra and reaction kinetics. In the case of acid dyes such as methyl orange and eriochrome black T, color removal efficiencies increased as initial pH of the dye solution decreased. However, the color removal of methylene blue, a basic dye, was not affected much by the initial pH and more than 70% of color was removed within 10 min. During the decolorization reaction, the absorbance of methyl orange (${\lambda}_{max}=464nm$) and eriochrome black T (${\lambda}_{max}=528nm$) decreased in the visible range but increased in the UV range. The absorbance of methylene blue (${\lambda}_{max}=664nm$) also decreased gradually in the visible range. Pseudo-zero order, pseudo-first order, and pseudo-second order kinetic models were used to analyze the reaction kinetics. The pseudo-second order kinetic model was found to be the best with good correlation. The decolorization reaction rate constants ($k_2$) of methylene blue were relatively higher than those of methyl orange and eriochrome black T. The reaction rate constants of methyl orange and eriochrome black T increased with a decrease in the initial pH.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2002.06a
• /
• pp.37-37
• /
• 2002

• Clean Technology
• /
• v.23 no.2
• /
• pp.188-195
• /
• 2017

This research studied the adsorption of basic dye, Basic Blue 3 (BB3) by using coal-based granular activated carbon (C-GAC) from aqueous solution. All experiments were performed in batch processes, and adsorption parameters such as C-GAC dosage, contact time, initial dye concentration and temperature were evaluated. The removal efficiency of BB3 was increased with increasing the C-GAC dosage and 100% of initial concentration, $50mg\;L^{-1}$ was removed above 0.2 g of C-GAC. Also, the time to reach equilibrium depended on the initial dye concentration. According to the Langmuir model, the maximum uptakes of C-GAC were calculated to be 66.45, 84.97 and $87.19mg\;g^{-1}$ at 25, 35 and $45^{\circ}C$, respectively. In addition, thermodynamic parameters such as Gibbs free energy change, enthalpy change and entropy change were investigated.

• Carbon letters
• /
• v.13 no.2
• /
• pp.61-72
• /
• 2012

Dye removal from waste water via adsorption by activated carbons (ACs) developed from agricultural wastes represents an ideal alternative to other expensive treatment options. Physical and chemical ACs were prepared from rice husks. The textural properties of the ACs were characterized by Brunauer-Emmett-Teller-$N_2$ adsorption and scanning electron microscopy. The chemistry of the carbon surface was investigated by Fourier transform infrared spectroscopy, base and acid neutralization capacities, pH of the active carbon slurry, and $pH_{pzc}$. The adsorption capacities of the ACs for the basic dye (methylene blue) and acid dye (acid green 25) were determined using parameters such as contact time, pH, and temperature. NaOH-ACs showed the highest surface area and total pore volume, whereas steam-ACs showed the lowest ones.