• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.810-825
• /
• 2021

This study measured and analyzed clothing pressure at each measurement part of commercial body shapers to provide basic information for product design and clothing pressure standard and level. This study used five body shaper. Clothing pressure measurements were taken at 18points: Anterior area 8points, lateral area 5points, posterior area 5points. The findings of this study were as follows. As a result of measuring the clothing pressure, the body shaper 1 showed the highest pressure, and body shaper 5 showed the lowest pressure at almost of the measurement points of the three body types. In some cases, body shapers 2, 3, and 4 showed different orders of pressure depending on the measurement point. The highest measured values in most body shapers were the P1 shoulder area and the P2 bust area. The lowest measurement area differed by body type, but mainly P3 underbust area, P4 thorax area and P9 axillary area, P11 waist lateral area, P13 hip lateral area. These body shapers showed different results depending on the the manufacturers and body type of middle-aged women, and because there was no standard for the pressure value. Therefore, it is necessary to design a body shaper sizing system after accurately setting the clothing pressure value for each body part of the consumer.

• Journal of KSNVE
• /
• v.7 no.2
• /
• pp.261-272
• /
• 1997

Recently washing machines are to be in lower vibration and lower sound because of better environment. Vibration problems in washing machines occur in both washing mode and spinning mode, but vibration in spinning mode becomes main problem because of its high rotating speed and continuity. Vibration while spinning is mainly due to rigid body motion of total washing system which includes suspending rods, washing bath, spinning bath, and gear sets. In this study, some researches were done in order to analyze the rigid body motion of washing system and flexible vibration of spinning bath. A basic mathematical model was established, and the effect of position of salt water and shape change of salt water case were considered. And the effect of lengths of suspending rods, attaching angles, vertical and horizontal position, stiffness of spring on the change of vibration were also considered. To identify the effect of salt water on vibration, some measurements were done. When salt water was positioned at upper part, the effect was most and this coincides with the tendency of simulation.

• Journal of the Korean Home Economics Association
• /
• v.30 no.1
• /
• pp.67-86
• /
• 1992

The author distributed the questionaires which ask the idea of the purchase of children's clothes in order to help the emotinal development of children and to raise demostic economy. 89% of those who answered realized the necessity of home sewing. Because of the lack of sewing ability(66%), the author made comparatively easy patterns such as blouses for summer, skirts, short pants and one-piece dresses. To populrize these patterns, the aother used the measurements of body-measurement which were made by Korea Institute of Standard. The author studied the patterns and choice of patterns according to growing body. The author tested the clothes worn and visual evaluation for fitness of the patterns. The results are as follows: First; The author developed basic pattern 1 and 2 and applied to design A, B and C. Second: For every design, the author made patterns fit to the children. Third: According to age, the author curtailed or enlarged patterns. Lastly: The author tried to reduce living expenses through making children's clothes using the sewing machine and supress over-consumption and lead the people toward normal economic life.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.1
• /
• pp.37-46
• /
• 1985

The study is undertaken to utilize the computer in pattern making for women. The automation by the use of computer provides the higher accuracy and efficiency in pattern making. GIGI Graphic Terminal is used for pattern making. The results are as follows: 1. Basic points which can be connected to depict basic pattern are represented on the X-Y co-ordinates. 2. Body measurements for bodice and sleeve pattern are as follows: For bodice pattern: center back waist length, bust girth, and shoulder width. For sleeve pattern: arm hole length, wrist girth, and sleeve length. 3. Grading of standard size was accomplished by using same method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.1
• /
• pp.143-153
• /
• 2003

This study was conducted in order to provide basic study material for children's garment design. The subjects of this study are fifth and sixth grade elementary school girls, who demonstrate rapid growth and the differences among individual somatic types are apparent. Their bodies are studied, categorized into patterns and the characteristics are examined. 1 The increase of height and length measurements according to age increase are much larger than that of breadth, depth and girth menasurments. 2. Eight factors are drawn upon factor analysis and the rate of factors comprisedare 78.68%. 3. The shapes of lower body of higher grades girls in elementary school are classified into three categories. The first type is slender in lower body and the second type is more contoured around waist area with longer length and higher height than the average elementary school girls. The third type is heavy in the lower body. 4. Eighteen items important for somatic categorization are selected through stepwise discriminant analysis and the exactitude rate of these items is 93.3%.

• Fashion & Textile Research Journal
• /
• v.12 no.4
• /
• pp.477-486
• /
• 2010

This study aims at establishing a sizing system required for producing ready-made clothes which can fit the body shape of disabled men using wheelchair. It measured the bodies of 178 adult men using wheelchair and compared the sizing system of German adult men using wheelchair (1984) with KS system(KS K0050, 2004) in order to establish standards of the sizing system. AS a result, in terms of classification of body shapes, KS system cover more types of disabled men's body shapes and especially, A types (Drop 15.6) showed the widest coverage with 32%. In classification of heights, the widest range of height was 170 cm, and Korean men's four sizes between 158 cm and 176 cm covers 88.2% of disabled men's body shape. For chest size, 91.1% of disabled men's chest sizes were included in seven sizes, which are 4 cm intervals between 88 cm and 112 cm with 100 cm standard. In consideration of the ranges of height and chest, the general sizes (A types; 11 sizes, B types; 3 sizes, Y types; 5 sizes) are selected to present the standardized measurements. Basic parts of the upper garment sizing system for disabled men using wheelchair were height-chest-waist size.

• Journal of Fashion Business
• /
• v.15 no.6
• /
• pp.134-147
• /
• 2011

This research was motivated to provide the Korean apparel companies doing business in China with some basic data useful to the development of their apparel commodities. As a result of selecting the standard or 'A' somatotype based on the body measurement data of the Chinese women in their early 20's and then, analyzing the correlated distribution and the most frequent intervals, it was found that 'height 160,' 'bust circumference 84' and 'waist circumference 66' were most prevalent. It was found that their average body measurements almost coincided with the standard '160A-84/66.' As discussed above, the researcher selected 13 women corresponding to '160A-84/66' in reference to 2008 body measurement data, and chose 6 women among them secondarily. Then, the researcher comparatively analyzed the direct measurement data and the 3D measurement ones, while analyzing the vertical/horizontal sagittal and Median plane section drawings, it was found that Subject 4 showed the most common somatotype data, while her upper body bent backwards reflected the population most properly.

• Journal of Fashion Business
• /
• v.5 no.1
• /
• pp.17-33
• /
• 2001

The purpose of this study is to offer the basic data for chinese men' clothing construction. This study analyzes characterization and classification of body types of the Chinese men with body measurement values. This researcher executed the body measurement of total 39 items on 414 chinese men in Beijing and Shanghai aged 20-49 years old and analyzed the data with methods of analysis of variance, factor analysis and cluster analysis using it as the study item. The results of this study can be summarized as follows; 1. As the result of comparative analysis of the body measurements by age group and birth region group in Beijing and Shanghai, the horizontal items such as the widths, depths, and girths increased with advancing ages, while heights decreased. 2. As the result of factor analysis on the items in Beijing and Shanghai, 5 factors on such as the first factor on the obesity of body, the second factor on the size of vertical of body, the third factor on the length of upper body, the forth factor on the width of the shoulder, the fifth factor on the degree of dropping shoulder were extracted. 3. As the result of classification based on the cluster analysis in Beijing, the body type were classified into 3 types. So, to see the feature of body form by types, type 1 was tallest, fattest type. type 2 was small stature, fat. type 3 was tall, thin. In Shanghai, he body type were classified into 3 types. So, to see the feature of body form by types, type 1 was tallest, fattest type. type 2 was small stature. type 3 was tall, thin.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.722-740
• /
• 2017

This study was conducted to offer basic data that can be used in a clothing industry for active senior males that are emerging as a new consumer bracket in a rapid aging age. To this end, this study conducted an analysis of 'younger' older male body types based on data from the 6th Size Korea. As a result of the body type analysis of 'younger' older males who are considered active seniors in comparison to 'middle' aged males, the former's height items became shorter compared to 'middle' aged males, but circumference items were bigger. Males aged 35-69, who are 'middle' aged males and 'younger' old males were divided into three body types in this study: Type1- small body type with protruded belly, compared to weight. Type 2- body type of slim torso with wide shoulder-back widths. Type3- big body type overall with tall height and heavy weight. According to body type distribution by age group, the middle-aged males had Type2 body type the most. The younger-old males showed type1 the most. There is a need to reflect the body types of active senior male characteristics in apparel pattern design because the current fits are not appropriate if active senior males wear clothing targeted for males aged 30-50.

• Journal of the Korean Society of Costume
• /
• v.57 no.4 s.113
• /
• pp.9-17
• /
• 2007

Somatotype is human body shape and physique type which can be classified not only by the size, but also by the shape or posture of the body. Postural variations in the alignment of the back, shoulder, and neck can have an adverse effect on the fit of garments designed to hang from the shoulders. There have been some previous studies about the lateral upper torso by analyzing photographic measurements. In this study, 3D body scan images were used to classify the side somatotype of upper lateral method even though they are major data in the classification of upper torso. This study focused on following objective.; 1) To apply new and developing technology into the apparel industry analyzing 3D body scan images. 2) To classify upper laterla torso using the data through the new improver technology, 3D body scanner. 3) To propose basic materials for well fitted garments for each type of figure. The test subjects for this study were two hundreds nine female aged 19 years and up who were recruited in Cornell university body scan research team. Seventeen Variables(12 angles, 5 lengths) out of 3D body scan data were measured based on these landmarks and applied to analyze. The result of factor analysis indicated that 6 factors were extracted through factor analysis and orthogonal rotation by the method of Varimax and those factors comprise 62.5% of total variance. And the somatotype of upper body is classified into 3 types of figures according to cluster analysis; Bent forward posture, Straight posture, Swayback posture. Future study could be addressed about the somatotype of body by the age group based on the large database with wide variety of age.