• Ocean and Polar Research
• /
• 제30권1호
• /
• pp.119-128
• /
• 2008

Japan's new Basic Ocean Law took effect in 20 July 2007. This law contains that 1) calls for the consolidation of eight government offices that previously worked separately on maritime issues; 2) establishes a basic plan for maritime matters, and; 3) creates a comprehensive maritime policy headquarters, run by the Prime Minister. The result is a structure for the integrated promotion of maritime policy. The Minister of Land, Infrastructure and Transport has been appointed to the newly established position of maritime minister. Japan has been in conflict with Korea and China over EEZ and territory, which has caused the country to turn to ocean. If Japan puts more emphasis on sea, it will be on a collision course with neighboring countries such as Korea, China, Russia, and Taiwan. Japan has been at odds with these countries; with Korea over Dokdo islets, with China over the Senkaku Islands and the East China Sea, where gas fields lie, with Taiwan over fishery rights in the East China Sea, with Russia over the Kuril Islands. Korea's position about the establishment of Japan's new Basic Ocean Law is followed: 1) expression of Korea's position in maritime resourcces of east china sea, 2) understand of strategy for maritime resources development and maritime delimitation in China and Japan, 3) a caution for extention of EEZ and maritime activities, 4)effective and comprehensive policy establishment, and strength in R&D, 5) construction of active and responsive system for maritime issues in neighbor country.

• Ocean and Polar Research
• /
• 제36권4호
• /
• pp.353-365
• /
• 2014

Artificial islands, installations and structures have been used as a major means for ocean development and management since the early 20th century. The International legal regime to regulate the man-made offshore structures also have evolved and the UN Convention on the Law of the Sea (UNCLOS) acts as a basic international instrument for that purpose. Although the Convention includes more detailed provisions on man-made offshore structures, there are some legal issues regarding jurisdiction of coastal State on the man-made offshore structures in the Exclusive Economic Zone (EEZ) or on the Continental shelf. For this reason, this article begins by reviewing the 1958 Convention on the Continental shelf and the UNCLOS by focusing on the EEZ and the Continental shelf regime governing the man-made offshore structures. It next examines some controversial international legal issues that have emerged from the regulation of man-made offshore structures in the EEZ or on the Continental shelf. This is followed by a review of the Korean domestic laws regulating artificial islands, installations and structures in the EEZ or on the continental shelf. Finally, it closes by summarizing the findings of the above examinations, and suggests some recommendations for future works.

• Applied Microscopy
• /
• 제40권2호
• /
• pp.117-123
• /
• 2010

본 연구에서는 의생물 시료에 대해 정량적 전자토모그래피의 기본 전제 조건인 Beer's law를 실험적으로 검증하였다. 시료는 의생물 시료와 비슷한 흡수계수를 갖는 카본 지지막과 latex sphere의 시료를 선택하였으며, 연속적으로 기울어진 TEM 이미지를 획득하였다. 우선, 전자토모그래피를 수행하여 카본 지지막과 latex sphere의 기본 상태를 파악하였다. Beer's law의 검증을 위해 각각의 물질에 대해 경사각 기울기에 따라 입사빔의 강도와 투과빔의 강도의 변화를 측정하여 회귀분석을 수행하였으며, 그 결과 RMS값 0.976의 범위에서 선형적인 관계를 확인할 수 있었다. 또한 Beer's law를 이용하여 카본 지지막과 latex sphere에 대한 각각의 상대적인 흡수계수를 구했으며, 그 값은 대략 1.71(5)/${\mu}m$과 2.67(6)/${\mu}m$으로 경사각 기울기에 대하여 일정하게 유지됨을 알 수 있었다. 따라서, 정밀한 실험조건에서 입사빔의 정보를 유추할 수 있다면 의생물 시료에 대해 엄밀한 Beer's law가 성립하는 정량적인 전자토모그래피가 수행될 수 있을 것으로 기대된다.

• Applied Microscopy
• /
• 제38권4호
• /
• pp.285-291
• /
• 2008

Electron tomography의 정량적 분석을 위해서 대물렌즈 조리개가 투과빔의 강도에 미치는 영향을 평가하였다. Electron tomography에 도입되는 Beer's law의 올바른 적용을 위해서는 투과빔은 시료의 기울기에 따른 mass thickness의 변화에 의한 효과만을 반영해야 한다. 그러므로 빔 경로상의 대물렌즈 조리개, 홀더 등에 의한 다른 효과는 제거되어야 한다. 본 연구에서는 대물렌즈 조리개의 cut-off 효과를 120 kV TEM과 Quantifoil holey 카본 시료를 이용하여 상세히 평가하였다. 대물렌즈 조리개를 사용하지 않은 경우와 비교할 때, $30{\mu}m$ 크기의 대물렌즈 조리개를 통과한 투과전자빔의 강도는 약 16.7%의 감소가 일어난다. 또한 $55^{\circ}$ 이상의 고경사각 기울기에서는 대물렌즈 조리개의 cut-off 효과에 의해 14.2%의 강도 감소가 추가적으로 발생함을 알 수 있었다. Electron tomography에서 정량 분석을 위해서는 이러한 대물렌즈 조리개의 영향을 고려해야만 한다. 또한 Beer's law의 올바른 적용을 위해서는 일련의 기울기에 따른 2차원적 영상은 가능하면 대물렌즈 조리개를 사용하지 않은 상태에서 획득하는 것이 바람직하다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.64-69
• /
• 2003

This paper describes a study on the tearing damage of the ship's bottom plating during a grounding. It has been known widely that difference scaling laws are applied for bodies undergoing simultaneously plastic flow and crack propagation in the deformation of the plate tearing. Especially, the basic scaling law is not followed for the fracture. In this study plate cutting experiments for the geometrically similar models have been performed in order to verify the problem. From the experimental results, it has been observed that the cutting forces and energy for the larger models are significantly lower than those of the smaller models the damage become large. A simplified analytical method for the estimation of tearing is proposed based on the experiments and it has been observed that the results of the present formula are correlated very well with the experiments

• 한국해양공학회지
• /
• 제18권1호
• /
• pp.41-46
• /
• 2004

This paper describes a study on the tearing damage of a ship's bottom plating, during a grounding. It is widely known that different scaling laws are applied for bodies undergoing simultaneous plastic flow and crack propagation in the deformation of plate tearing. Specifically, the basic scaling law is not followed for the fracture. In this study, in order to verify the problem, plate cutting experiments for geometrically similar models have been performed. From the experimental results, it has been observed that the cutting forces and energy for the larger models are significantly lower than those of the smaller models. A simplified analytical method for the estimation of tearing is proposed, based on the experiments. It has been observed that the results of the present formula are highly correlated with the experiments.

• 대한조선학회논문집
• /
• 제60권5호
• /
• pp.358-366
• /
• 2023

Due to the International Maritime Organization's (IMO) environmental regulations on NOx and SOx, LNG-fueled eco-friendly ships are gaining attention worldwide, and various eco-friendly ships are being proposed and demanded for conversion to eco-friendly ships in Korea, as the eco-friendly ship law has recently been enforced. In this study, the initial basic design was performed to convert an existing Marine Gas Oil (MGO) fueled ship into an LNG-DF propulsion ship, targeting medium-sized ship, to select the fuel tank capacity and main dimensions and appropriate fuel ratio between the two fuels. In particular, Sustainable basic design method considering environmental impact were proposed by performing a Life Cycle Assessment (LCA) throughout the design process, and various design options were compared and analyzed to meet different design conditions by applying them.

• 한국항해학회지
• /
• 제16권2호
• /
• pp.41-52
• /
• 1992

It is, as everyone knows, very important for human beings to protect and conserve marine environment. We has believed the ocean is so wide and deep that it cannot be polluted. But it has begun to doubt the capacity of self-purification of the ocean due to pollution arising from marine casualities. It has proved that semi-enclosed sea is likely to be polluted and cannot be restored easily once pollution occurs. Therefore, first of all it is important to take preventive measures for prevention of marine pollution in the semi-enclosed sea like the Yellow Sea. Many of regional conventions for prevention of marine pollution have come into existence. this dissertation was set out for the fact that the Yellow Sea is semi-enclosed sea which is vulnerable to marine pollution. It is desirable not to deal with marine preservation of the Yellow Sea by a single exclusively but to deal with it by cooperation of all coastal states under the present circumstances. I proposed a program of regional cooperation to protect and conserve the Yellow Sea. This program must be progressed with gradual arrangements. First, they must establist a basic cooperation committee to work basic affairs on the protection of marine environment within the Yellow Sea. The Committee Mainly play parts of study and research concerned with pollution of the Yellow Sea in the non-governmental side and consist of legal and scientific experts. Second, they must establish the control Committee to prevent marine pollution of the Yellow Sea substantially. There is a reason that regional cooperation cannot be directly concluded with the regional tready. Because there is a problem of Recognition of States left. In principle, a subject of tready must be a state in the International Law. But they have not made Recognition of State which is demanded by International Law between North and South Koreas. Therefore, the Control committee must play a substantial part of prevention from pollution instead of the treaty. Finally, we concluded tentatively named $\ulcorner$Convention on Regional Cooperation for Protection of Marine Environment of the Yellow Sea from Pollution$\lrcorner$ if the matter is settled which is related to Recognition of States in the International Law.

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.105-112
• /
• 1992

The main purpose of this study is to derive a law of fatigue crack growth rate in the region of elastic or elasto-plastic fracture mechanics at elevated temperatures through the application of dimensional analysis. An equation of elasto-plastic fatigue crack growth rate at elevated temperatures appeared a new Arrhenius type equation containing J-integral range and absolute temperature. The elastic or elasto-plastic crack growth rate equation shows a fairly good agreement with the experimental results for Cr-Mo-V rotor steel and Hastelloy-X alloy in the comparatively wide temperature ranges.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.342-346
• /
• 2004

Recently there has been a great world-wide interest in developing and characterizing new nano-structured materials. These newly developed materials are often prepared in limited quantities and shapes unsuitable for the extensive mechanical testing. The development of depth sensing indentation methods have introduced the advantage of load and depth measurement during the indentation cycle. In the present work, ZnO thin films are prepared on the Glass, GaAs(100), Si(111), and Si(100) substrates at different temperatures by pulsed laser deposition(PLD) method. Because the potential energy in c-axis is law, the films always shaw c-axis orientation at the optimized conditions in spite of the different substrates. Thin films are investigated by X-ray diffractometer and Nano indentation equipment. From these measurements it is possible to get elastic modulus and hardness of ZnO thin films on all substrates.