• Ocean and Polar Research
• /
• v.30 no.1
• /
• pp.119-128
• /
• 2008

Japan's new Basic Ocean Law took effect in 20 July 2007. This law contains that 1) calls for the consolidation of eight government offices that previously worked separately on maritime issues; 2) establishes a basic plan for maritime matters, and; 3) creates a comprehensive maritime policy headquarters, run by the Prime Minister. The result is a structure for the integrated promotion of maritime policy. The Minister of Land, Infrastructure and Transport has been appointed to the newly established position of maritime minister. Japan has been in conflict with Korea and China over EEZ and territory, which has caused the country to turn to ocean. If Japan puts more emphasis on sea, it will be on a collision course with neighboring countries such as Korea, China, Russia, and Taiwan. Japan has been at odds with these countries; with Korea over Dokdo islets, with China over the Senkaku Islands and the East China Sea, where gas fields lie, with Taiwan over fishery rights in the East China Sea, with Russia over the Kuril Islands. Korea's position about the establishment of Japan's new Basic Ocean Law is followed: 1) expression of Korea's position in maritime resourcces of east china sea, 2) understand of strategy for maritime resources development and maritime delimitation in China and Japan, 3) a caution for extention of EEZ and maritime activities, 4)effective and comprehensive policy establishment, and strength in R&D, 5) construction of active and responsive system for maritime issues in neighbor country.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.353-365
• /
• 2014

Artificial islands, installations and structures have been used as a major means for ocean development and management since the early 20th century. The International legal regime to regulate the man-made offshore structures also have evolved and the UN Convention on the Law of the Sea (UNCLOS) acts as a basic international instrument for that purpose. Although the Convention includes more detailed provisions on man-made offshore structures, there are some legal issues regarding jurisdiction of coastal State on the man-made offshore structures in the Exclusive Economic Zone (EEZ) or on the Continental shelf. For this reason, this article begins by reviewing the 1958 Convention on the Continental shelf and the UNCLOS by focusing on the EEZ and the Continental shelf regime governing the man-made offshore structures. It next examines some controversial international legal issues that have emerged from the regulation of man-made offshore structures in the EEZ or on the Continental shelf. This is followed by a review of the Korean domestic laws regulating artificial islands, installations and structures in the EEZ or on the continental shelf. Finally, it closes by summarizing the findings of the above examinations, and suggests some recommendations for future works.

• Applied Microscopy
• /
• v.40 no.2
• /
• pp.117-123
• /
• 2010

This study has examined experimentally the Beer's law which is a precondition for quantitative electron tomography. We used carbon support film and latex spheres, which have similar absorption coefficients with biological samples, as the test samples to take a tilt-series of images for electron tomography. First, the 3D information of carbon film and latex spheres was obtained by electron tomography. Then, the regression analysis on the relationship between the intensities of the incident and the transmitted beams in a tilt series was carried out to examine the Beer's law. The regression results with RMS error of 0.976 show the linear intensity variations of the transmitted beam as the tilt angles were increased. In addition, the relative absorption coefficients of carbon support film and latex spheres calculated experimentally through the Beer's law were 1.71 (5) and 2.67 (6)/${\mu}m$, respectively. The absorption coefficients remained constant within a full tilt range. Therefore, it is expected that quantitative electron tomography could be performed for biological samples by applying Beer's law provided the exact intensity of incident beam can be obtained under the thoroughly controlled experimental conditions.

• Applied Microscopy
• /
• v.38 no.4
• /
• pp.285-291
• /
• 2008

We have evaluated the effects of experimental factors on transmitted electron beam intensities for quantitative analysis in electron tomography. For the correct application of Beer's law in electron tomography, the transmitted beam intensity should reflect the net effect of mass properties on beam path. So, the any other effects of the objective aperture and the specimen holder on beam path should be removed. The cut-off effects of objective aperture were examined using Quanti-foil holey carbon film and a transmission electron microscope operated at 120 kV. The transmitted beam intensities with $30{\mu}m$ objective aperture dropped about 16.7% compared to electron beam intensities without the objective aperture. Also, the additional losses of about 14.2% at high tilt angles were occurred by cut-off effects of the objective apertures. For the precise quantitative analysis in electron tomography, the effect of the objective aperture on transmitted electron beam intensities should be considered. It is desirable that 2-D tilt series images are obtained without the objective aperture for correct application of Bee's law.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.64-69
• /
• 2003

This paper describes a study on the tearing damage of the ship's bottom plating during a grounding. It has been known widely that difference scaling laws are applied for bodies undergoing simultaneously plastic flow and crack propagation in the deformation of the plate tearing. Especially, the basic scaling law is not followed for the fracture. In this study plate cutting experiments for the geometrically similar models have been performed in order to verify the problem. From the experimental results, it has been observed that the cutting forces and energy for the larger models are significantly lower than those of the smaller models the damage become large. A simplified analytical method for the estimation of tearing is proposed based on the experiments and it has been observed that the results of the present formula are correlated very well with the experiments

• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.41-46
• /
• 2004

This paper describes a study on the tearing damage of a ship's bottom plating, during a grounding. It is widely known that different scaling laws are applied for bodies undergoing simultaneous plastic flow and crack propagation in the deformation of plate tearing. Specifically, the basic scaling law is not followed for the fracture. In this study, in order to verify the problem, plate cutting experiments for geometrically similar models have been performed. From the experimental results, it has been observed that the cutting forces and energy for the larger models are significantly lower than those of the smaller models. A simplified analytical method for the estimation of tearing is proposed, based on the experiments. It has been observed that the results of the present formula are highly correlated with the experiments.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.5
• /
• pp.358-366
• /
• 2023

Due to the International Maritime Organization's (IMO) environmental regulations on NOx and SOx, LNG-fueled eco-friendly ships are gaining attention worldwide, and various eco-friendly ships are being proposed and demanded for conversion to eco-friendly ships in Korea, as the eco-friendly ship law has recently been enforced. In this study, the initial basic design was performed to convert an existing Marine Gas Oil (MGO) fueled ship into an LNG-DF propulsion ship, targeting medium-sized ship, to select the fuel tank capacity and main dimensions and appropriate fuel ratio between the two fuels. In particular, Sustainable basic design method considering environmental impact were proposed by performing a Life Cycle Assessment (LCA) throughout the design process, and various design options were compared and analyzed to meet different design conditions by applying them.

• Journal of the Korean Institute of Navigation
• /
• v.16 no.2
• /
• pp.41-52
• /
• 1992

It is, as everyone knows, very important for human beings to protect and conserve marine environment. We has believed the ocean is so wide and deep that it cannot be polluted. But it has begun to doubt the capacity of self-purification of the ocean due to pollution arising from marine casualities. It has proved that semi-enclosed sea is likely to be polluted and cannot be restored easily once pollution occurs. Therefore, first of all it is important to take preventive measures for prevention of marine pollution in the semi-enclosed sea like the Yellow Sea. Many of regional conventions for prevention of marine pollution have come into existence. this dissertation was set out for the fact that the Yellow Sea is semi-enclosed sea which is vulnerable to marine pollution. It is desirable not to deal with marine preservation of the Yellow Sea by a single exclusively but to deal with it by cooperation of all coastal states under the present circumstances. I proposed a program of regional cooperation to protect and conserve the Yellow Sea. This program must be progressed with gradual arrangements. First, they must establist a basic cooperation committee to work basic affairs on the protection of marine environment within the Yellow Sea. The Committee Mainly play parts of study and research concerned with pollution of the Yellow Sea in the non-governmental side and consist of legal and scientific experts. Second, they must establish the control Committee to prevent marine pollution of the Yellow Sea substantially. There is a reason that regional cooperation cannot be directly concluded with the regional tready. Because there is a problem of Recognition of States left. In principle, a subject of tready must be a state in the International Law. But they have not made Recognition of State which is demanded by International Law between North and South Koreas. Therefore, the Control committee must play a substantial part of prevention from pollution instead of the treaty. Finally, we concluded tentatively named $\ulcorner$Convention on Regional Cooperation for Protection of Marine Environment of the Yellow Sea from Pollution$\lrcorner$ if the matter is settled which is related to Recognition of States in the International Law.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.105-112
• /
• 1992

The main purpose of this study is to derive a law of fatigue crack growth rate in the region of elastic or elasto-plastic fracture mechanics at elevated temperatures through the application of dimensional analysis. An equation of elasto-plastic fatigue crack growth rate at elevated temperatures appeared a new Arrhenius type equation containing J-integral range and absolute temperature. The elastic or elasto-plastic crack growth rate equation shows a fairly good agreement with the experimental results for Cr-Mo-V rotor steel and Hastelloy-X alloy in the comparatively wide temperature ranges.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.342-346
• /
• 2004

Recently there has been a great world-wide interest in developing and characterizing new nano-structured materials. These newly developed materials are often prepared in limited quantities and shapes unsuitable for the extensive mechanical testing. The development of depth sensing indentation methods have introduced the advantage of load and depth measurement during the indentation cycle. In the present work, ZnO thin films are prepared on the Glass, GaAs(100), Si(111), and Si(100) substrates at different temperatures by pulsed laser deposition(PLD) method. Because the potential energy in c-axis is law, the films always shaw c-axis orientation at the optimized conditions in spite of the different substrates. Thin films are investigated by X-ray diffractometer and Nano indentation equipment. From these measurements it is possible to get elastic modulus and hardness of ZnO thin films on all substrates.