Development of Algorithm in Analysis of Single Trait Animal Model for Genetic Evaluation of Hanwoo (단형질 개체모형을 이용한 한우 육종가 추정프로그램 개발)
-
- Journal of Animal Science and Technology
- /
- v.55 no.5
- /
- pp.359-365
- /
- 2013
Estimate breeding value can be used as single trait animal model was developed directly using the Fortran language program. The program is based on data computed by using the indirect method repeatedly. The program develops a common algorithm and imprves efficiency. Algorithm efficiency was compared between the two programs. Estimated using the solution is easy to farm and brand the service, pedigree data base was associated with the development of an improved system. The existing program that uses the single trait animal model and the comparative analysis of efficiency is weak because the estimation of the solution and the conventional algorithm programmed through regular formulation involve many repetition; therefore, the newly developed algorithm was conducted to improve speed by reducing the repetition. Single trait animal model was used to analyze Gauss-Seidel iteration method, and the aforesaid two algorithms were compared thorough the mixed model equation which is used the most commonly in estimating the current breeding value by applying the procedures such as the preparation of information necessary for modelling, removal of duplicative data, verifying the parent information of based population in the pedigree data, and assigning sequential numbers, etc. The existing conventional algorithm is the method for reading and recording the data by utilizing the successive repetitive sentences, while new algorithm is the method for directly generating the left hand side for estimation based on effect. Two programs were developed to ensure the accurate evaluation. BLUPF90 and MTDFREML were compared using the estimated solution. In relation to the pearson and spearman correlation, the estimated breeding value correlation coefficients were highest among all traits over 99.5%. Depending on the breeding value of the high correlation in Model I and Model II, accurate evaluation can be found. The number of iteration to convergence was 2,568 in Model I and 1,038 in Model II. The speed of solving was 256.008 seconds in Model I and 235.729 seconds in Model II. Model II had a speed of approximately 10% more than Model I. Therefore, it is considered to be much more effective to analyze large data through the improved algorithm than the existing method. If the corresponding program is systemized and utilized for the consulting of farm and industrial services, it would make contribution to the early selection of individual, shorten the generation, and cultivation of superior groups, and help develop the Hanwoo industry further through the improvement of breeding value based enhancement, ultimately paving the way for the country to evolve into an advanced livestock country.
The purpose of this study is to deduce the effective improvement plans of engineering education system and to provide the base materials by analyzing satisfaction and problems in the perception survey of stakeholders related in engineering education system including Engineering Education Accreditation System. Engineering education system improvement plans from the results of study are as follows. First, government and university should provide more financial support to the college in order to improve education environment such as laboratories and equipment. Second, in order to improve links among engineering education stakeholders, student-professor, student-faculty, and colleges should operate effective mentoring program and consultation plan. Third, according to service quality evaluation, colleges need to give rewards to distinguished faculties for their outstanding work and build up job training about services in order to enhance satisfaction of students and professors, Also, business related to Engineering Education Accreditation System should be simplified and needs to increase the number of workers exclusively responsible for this work. Forth, in order to enhance comprehension of learning outcome and outcome of Engineering Education Accreditation System, it is necessary to improve Engineering education innovation center's status, to establish active systematic promotion system and to operate engineering education evaluation expert committee such as 'Engineering education system evaluation council'. Fifth, because of the stakeholder's shortage of benefits and tiredness accumulation, the issue of effectiveness in engineering education institutions has raised controversy. Thus, engineering education institutions needs to take measure necessary. Moreover, engineering education improvements should be improved by reflecting opinions from professors, faculties and students who are practically planning, operating and participating engineering education programs.
The purpose of this study is to investigate the relationship between cognitive levels and achievement of science process skills. A science laboratory process skills test based on optional instrument of the SISS was administered to a sample of 162 students in the 8th grade. Practical assessment tasks consisted of the contents about acid, base, density, and a property of cobalt chloride. The format of this practical test was the station type that students had to conduct a short activity. Science process skills included three sub-skills which were categorized as designing, performing, and reasoning. As cognitive levels develop from concrete operational stage to transition stage and formal operational stage. total scores of science process skills and mean scores of sub-skills were significantly increased. Regardless of cognitive levels. all students were more successful on performing than designing or reasoning. In case of being controlled cognitive levels, gender differences and area differences were not detected in achievement of science process skills. According to these results. there was a strong relationship between cognitive levels and achievement of science process skills by practical assessment. This study implies that considering student's cognitive levels is very important for improving science process skills.
The incidence of tuberculosis has been decreased, and especially the incidence of severe complicated tuberculosis has been markedly decreased as the result of widely used BCG vaccines. But tuberculosis is still an important community accquired infectiouse disease in the world despite continued worldwide efforts to control the disease. Miliary tuberculosis, the most serious complicated tuberculosis, can be occurred by lymphohematogenous dissemination of tuberculosis, and intracranial tuberculoma with or without tuberculosis meningitis can be developed in case of miliary tuberculosis. In general, serious tuberculosis infections such as miliary tuberculosis and CNS tuberculosis are developed especially in young infants and children in cases of delayed diagnosis and treatment despite receiving BCG vaccination, and usually those patients have contact sources. Intrcranial tuberculoma in children are usually found near infratentorial site at the base of cerebellum, and clinically symptoms and signs of increased intracranial pressure developed before treatment. Serial brain CT or MRI is a good non-invasive diagnostic modality of intracranial tuberculoma. Although surgical intervention was initially advocated as the mainstay of intracranial tuberculoma therapy, but many recent clinical studies indicate that intracranial tuberculoma can be cured with medical treatment alone. We experienced a case of 3 months old male patient, who was diagnosed as having miliary tuberculosis associated with multiple intracranial tuberculoma. He received BCG vaccination at 4 weeks after birth, and his father was confirmed as active pulmonary tuberculosis patient after this patient's admission. We report this case with a review of related literatures.
The tegumental ultrastructure of juvenile and adult Echinostoma cinetorchis (Trematoda: Echinostomatidae) was observed by scanning electron microscopy. Three-day (juvenile) and 16-day (adult) worms were harvested from rats (Sprague-Dawley) experimentally fed the metacercariae from the laboratory-infected fresh water snail, Hippeutis cantori. The worms were fifed with 2.5% glutaraldehyde, processed routinely, and observed by an ISI Korea DS-130 scanning electron microscope. The 3-day old juvenile worms were elongated and ventrally curved, with their ventral sucker near the anterior two-fifths of the body. The head crown was bearing 37∼38 collar spines arranged in a zigzag pattern. The lips of the oral and ventral suckers had 8 and 5 type II sensory papillae respectively, and bewteen the spines, a few type III papillae were observed. Tongue or spade-shape spines were distributed anteriorly to the ventral sucker, whereas peg-like spines were distributed posteriorly and became sparse toward the posterior body. The spines of the dorsal surface were similar to those of the ventral surface. The 16-day old adults were leaf-like, and their oral and ventral suckers were located very closely. Aspinous head crown, oral and ventral suckers had type II and type III sensory papillae, and numerous type I papillae were distributed on the tegument anterior to the ventral sucker. Scale-like spines, with broad base and round tip, were distributed densely on the tegument anterior to the ventral sucker but they became sparse posteriorly. At the dorsal surface, spines were observed at times only at the anterior body. The results showed that the tegument of E. cinetorchis is similar to that of other echinostomes, but differs in the number and arrangement of collar spines, shape and distribution of tegumenal spines, and type and distribution of sensory papillae.
Purpose : To assess the clinical utility of turbo contrast-enhanced magnetic resonance angiography(CE MRA) in the evaluation of the aortic arch and its major branches and to compare the image quality of CE MRA among different coils used. Materials and Methods : Turbo three-phase dynamic CE MRA encompassing aortic arch and its major branches was prospectively performed after manual bolus IV injection of contrast material in 29 patients with suspected cerebrovascular diseases at 1.0T MR unit. the raw data were obtained with 3-D FISH sequence (TR 5.4ms, TE 2.3ms, flip angle 30, slab thickness 80nm, effective slice thickness 4.0mm, matrix size
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70